Overview
The Daystar KJ61002BK is a greasable Super Shackle set, sold as a pair, for Jeep CJ and Willys CJ vehicles built from 1946 to 1968. Confirm the exact lift height before ordering, since the figure is either 1.25 inch or 1-1/2 inch.
The greasable kit includes black grease grooved polyurethane bushings, replacement sleeves, and rifle drilled bolts with an easy-to-access grease zerk. The shackles are a fully welded round tube with a zinc plated finish and carry a limited lifetime warranty.
Daystar’s description says its Super Shackles can handle heavy use and that other versions provide stock replacement height or up to 2-1/2 inch of lift. Compare lift heights across part numbers if your build calls for a different amount.
Key features
- Greasable design with a grease zerk
- Black grease grooved polyurethane bushings
- Rifle drilled bolts included
- Fully welded round tube construction
- Zinc plated finish
- Limited lifetime warranty
- Sold as a pair, suitable for front or rear location
Choosing a lift height
Shackle lift height is the main decision with a set like this. A higher shackle raises the rear or front of the leaf spring more, which changes ride height, steering geometry and the angle the axle sits at. Before buying, decide how much change you want and whether the rest of the suspension can handle it.
Because the kit is greasable and built from a welded round tube, it suits owners who plan to keep the vehicle working for a long time. Pair the shackles with new bushings and sleeves so the whole joint is fresh, and inspect the spring eyes and mounts for wear while the old parts are off.
- Confirm the lift height before ordering
- Match the shackle set to the body and axle you have
- Replace sleeves with the bushings when servicing
Specifications
| Brand | Daystar |
|---|---|
| Part number | KJ61002BK |
| UPC | 814423011488 |
| Lift height | 1.25 inch (title); 1-1/2 inch (highlights) |
| Bushings | Black grease grooved polyurethane |
| Bolts | Rifle drilled, greasable, included |
| Construction | Fully welded round tube |
| Finish | Zinc plated |
| Location | Front or rear |
| Position | Front |
| Quantity | Sold as a pair |
| Warranty | Limited lifetime |
Vehicle fitment
It fits the 1959–1966 Jeep CJ3 (Base), the 1959–1975 Jeep CJ5 (Base and Renegade), the 1966–1968 Jeep CJ5A (Base), the 1959–1975 Jeep CJ6 (Base), the 1966–1968 Jeep CJ6A (Base), and Willys CJ-2, CJ-3, CJ-5 and CJ-6 models from 1946 to 1958. Confirm your vehicle’s year, model and trim before ordering.
The list covers Jeep CJ and Willys CJ models only. The Jeep CJ7, the Scrambler and all Wrangler generations are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A lift of this size changes driveline angles, so have them checked along with alignment after installation. Grease the bolts and bushings through the zerk once the shackles are set. Support the axle on jack stands before removing the factory shackles.
What’s included
The greasable kit includes replacement bushings, sleeves, and gun-drilled bolts with a grease zerk. The set is sold as a pair.









