Shackle Reversal Kits
Showing 25–36 of 36 resultsSorted by popularity
-
Shackle Reversal Kits
Daystar 1.5 Inch Lift Non-Greaseable Super Shackles – KJ60002
- Fits 1949–1975 Jeep CJ models, including CJ3, CJ5, CJ6 and Willys CJ-2 to CJ-6
- 1.5 inch lift at the front and rear
- Non-greaseable design that keeps the factory bushings
- Zinc-plated finish, sold in pairs
- Part number KJ60002, UPC 814423011518
SKU: DAYKJ60002 -
-
Shackle Reversal Kits
Rubicon Express Shackle Reversal Kit – RE2800
- Rubicon Express RE2800 shackle reversal kit for the YJ front suspension
- Lets the front wheels move back and up as the suspension compresses
- Little drilling and no welding to install
- Black powder coat components; UPC 614901440454
SKU: R/ERE2800 -
-
Shackle Reversal Kits
Trail Gear Greasable Shackle Kit – 110007-1-KIT
- Trail Gear greasable shackle kit, part number 110007-1-KIT, for front shackle reversal
- Listed size 5.0 in., front offset design
- Threaded zerk fittings for greasing, factory size 18mm bolts with crimp nuts
- Polly bushings included, zinc plated plates
SKU: TGI110007-1-KIT -
-
Shackle Reversal Kits
Rubicon Express Shackle Rear Boomerang Greaseable 6 Inch XJ/Pair – RE2705
- Rubicon Express RE2705 rear boomerang lift shackle for XJ, 6 inches total length
- Provides a little over an inch of lift
- Greasable Zerk fittings and urethane bushings
- Laser cut 3/16-inch steel with MIG-welded seams
SKU: R/ERE2705 -
-
-
Shackle Reversal Kits
Rubicon Express Shackle Conversion Kit Rear 2.5 Inch Wide CJ/Pair – RE2786
- Rubicon Express RE2786 rear shackle conversion kit for 2.5-inch wide springs
- Greasable 1.5-inch eye; 1 inch longer than stock
- Laser cut 1/4-inch side plates; silver plating
- Sold as a pair; UPC 614901440430
SKU: R/ERE2786 -
Shackle Reversal Kits
Rubicon Express Shackle Rear Boomerang Greaseable 5 Inch YJ/Pair – RE2775
- Rubicon Express RE2775 greaseable rear shackle reversal kit for YJ
- 1 inch larger than stock length
- Laser cut 1/4-inch side plates and black polyurethane bushings
- Sold as a pair; UPC 614901440386
SKU: R/ERE2775 -
What a spring shackle does
A leaf spring's rear (and sometimes front) eye attaches to the frame through a shackle, a swinging link that lets the spring change length as the axle moves. Shackle length and angle affect ride height, wheel travel, and how the spring behaves under load.
A longer shackle raises the vehicle slightly and softens the spring rate, while a reversal places the shackle at the front of the spring, which changes how the axle reacts to bumps and braking.
Shackle reversal explained
On a standard layout the shackle sits at the rear of the front spring. Reversing it, so the fixed end sits at the rear, is meant to improve the way the axle moves up and back over obstacles, and many owners report better ride on the trail. Kits typically include new brackets, shackles, and hardware.
Some kits are bolt-on and need no welding, while others require cutting or welding frame hardware, so read the product details first.
Choosing the right shackle
- Greasable vs non-greaseable: Greasable shackles allow lubrication of the bushings, which helps reduce squeaks and wear.
- Lift amount: Choose a length that matches your lift goals, and compare with the spring arch and shock length.
- Width: Shackles come in narrow and wide versions to fit the spring pack and frame brackets.
- Material: Look at fully welded tubing, zinc plating, and polyurethane or rubber bushings.
Installation and driveline
Support the frame on jack stands and the axle on a jack before removing hardware. Replace worn bolts and bushings with the new ones, and torque everything to specification with the vehicle at ride height. Changing shackle length alters pinion angle, brake line length, and driveline angles, so check them. Suspension changes affect handling and safety, so consider professional installation and an alignment check. Confirm fitment for your exact year, make, and model.
Before you start
Inspect the frame brackets, spring eyes, and bolts for cracks and wear, since fresh shackles will not help if the mounts are failing. Measure the existing shackle length and note the spring eye diameter and bolt size so the new parts match.
Plan for the related changes: shocks, bump stops, sway bar links, and the track bar may need to be adjusted when ride height changes. After the first drive, retorque the shackle bolts, since bushings settle. Grease greasable shackles at regular intervals and after water crossings.
Greasable shackles use drilled bolts with a grease fitting, so a grease gun can push lubricant into the bushing. Polyurethane bushings benefit from regular grease and can squeak if dry, while rubber bushings are quieter but may wear faster under hard use. Choose based on how the vehicle is driven.
Shackle width must match the spring eye and the shackle brackets. A narrow shackle on a wide spring pack, or the reverse, will bind. Lift shackles can also change the spring angle, so avoid stacking too much lift in one place without checking the other parts of the suspension.
Plan on retorquing all hardware after a few miles, and inspect the shackles after hard trail use. Bent shackles, cracked welds, and elongated holes are signs to replace parts immediately.
Popular Shackle Reversal Kits brands
- Daystar (16)
- Rubicon Express (11)
- Trail Gear (5)
- Pro Comp Suspension (1)
- Warrior (1)
- Mountain Off Road Enterprises (1)
- Fabtech (1)
Shackle Reversal Kits FAQ
What is a shackle reversal?
It means relocating the shackle from the rear of a spring to the front, so the spring's fixed mount sits behind the shackle. The aim is smoother axle motion over bumps. Kits include the brackets and hardware.
Do I need greasable shackles?
They are not required, but they let you lubricate the bushings and bolts, which reduces noise and wear. Non-greaseable versions are simpler but may need replacement sooner in dirty or wet conditions.
Will longer shackles lift my Jeep?
A little. A longer shackle raises ride height by the amount stated for each product. Extra lift can change pinion angle and brake lines, so check driveline geometry afterward.
Is welding required for a reversal kit?
Some kits are bolt-on and need no welding, while others call for welding or cutting. The listing and the instructions say which. If welding is needed, a qualified fabricator is advisable.



