Overview
The Daystar KJ61003BK is a 2.25 inch lift greasable Super Shackle set, sold as a pair, for Jeep CJ5 and Willys CJ vehicles. It fits the 1959–1960 and 1966–1975 Jeep CJ5 (Base and Renegade), the 1949–1953 Willys CJ-3, and the 1955–1958 Willys CJ-5.
This greasable version adds black grease grooved polyurethane bushings, replacement sleeves, and rifle drilled greasable bolts with a grease zerk. The build is a fully welded round tube with a zinc plated finish, and the warranty is a limited lifetime one.
Taller Super Shackle versions in the Daystar line reach up to 2-1/2 inch of lift. At 2-1/4 inch, this model sits just below that top height, making it a middle option for owners who want more height than a stock replacement provides.
Key features
- 2-1/4 inch lift, front position
- Black grease grooved polyurethane bushings
- Rifle drilled greasable bolts included
- Grease zerk for servicing the joints
- Fully welded round tube
- Zinc plated finish
- Limited lifetime warranty
Choosing the right setup
Lift height is the first decision. A higher shackle raises the body and changes the spring angle, so the driveline and steering may need adjustment afterward. A moderate lift keeps geometry closer to the original while still adding clearance for larger tires.
Related parts are often replaced at the same time. Longer brake lines and adjustable shock links can be needed at higher lift, and a driveshaft that binds may need a new angle. Check ride height before and after installation so you know how much change to expect.
Greasable joints deserve regular attention, so keep grease in the zerk at each service interval.
- Measure current ride height before ordering
- Consider longer brake lines at higher lift
- Recheck driveshaft angle after installation
Specifications
| Brand | Daystar |
|---|---|
| Part number | KJ61003BK |
| UPC | 814423011495 |
| Lift height | 2.25 inch (title); 2-1/4 inch (highlights) |
| Bushings | Black grease grooved polyurethane |
| Bolts | Rifle drilled, greasable, included |
| Construction | Fully welded round tube |
| Finish | Zinc plated |
| Location | Front or rear |
| Position | Front |
| Quantity | Sold as a pair |
| Warranty | Limited lifetime |
Vehicle fitment
It fits the 1959–1960 and 1966–1975 Jeep CJ5 (Base and Renegade), the 1949–1953 Willys CJ-3, and the 1955–1958 Willys CJ-5.
The 1976–1986 Jeep CJ5 and CJ7 years, the Jeep Scrambler and all Wrangler generations are not on this part’s list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Shackle lifts shift driveline geometry, so check driveline angles and alignment once the new shackles are installed. Support the axle on stands before removing the old hardware, and grease the joints through the zerk after assembly.
What’s included
The greasable version includes replacement bushings, sleeves, and rifle drilled bolts with a grease zerk. The shackles are sold as a pair.
