Suspension
Showing 6157–6168 of 7279 resultsSorted by popularity
-
-
Shock Absorbers
Bilstein 4600 Series Shock Absorber – 24-184915
- Bilstein 4600 Series front shock absorber, part number 24-184915
- Heavy duty 46mm gas charged monotube design
- Fits 1994–2001 Dodge Ram 1500, Ram 2500 and Ram 3500 pickups
- Yellow finish on a steel body, 0 in. lift/drop
- Former part numbers BILF4-B46-2129-H1 and BILF4-B46-2129-H2
SKU: BIL24-184915 -
Shock Absorbers
Bilstein 46mm Monotube Shock Absorber – 24-184908
- Fits the 2000–2004 Nissan Xterra (SE, XE) and 1993–1998 Toyota T100 per the manufacturer list
- Rear 46mm monotube, gas charged, heavy duty rating
- Lift height w/0 – 2 in. Lift
- Yellow finish, no external reservoir
- Part number 24-184908, UPC 651860614540
SKU: BIL24-184908 -
Shock Absorbers
Bilstein 4600 Series Shock Absorber – 24-184885
- Bilstein 24-184885 rear 4600 Series monotube gas shock absorber
- Fits 1998-2004 Nissan Frontier in Base, SC, SE and XE trims
- Yellow finish, 2 in body diameter, boots included
- Direct fit with 0 in lift/drop; no external reservoir
SKU: BIL24-184885 -
Shock Absorbers
Bilstein 4600 Series Shock Absorber – 24-184854
- Bilstein 24-184854 rear shock absorber from the 4600 Series, gas-charged monotube design
- Listed fitment: 1994–2001 Dodge Ram 1500; 1994–2002 Dodge Ram 2500 and 3500 (Base)
- 2 in body diameter, yellow finish, no reservoir
- Boots included
SKU: BIL24-184854 -
Shock Absorbers
Bilstein 4600 Series Shock Absorber – 24-184847
- Bilstein 24-184847 front 4600 Series monotube gas shock absorber
- Fits 1994-2001 Dodge Ram 1500 and 1994-2002 Ram 2500 and 3500 Base
- Yellow finish, 2 in body diameter, boots included
- Direct fit; no external reservoir listed
SKU: BIL24-184847 -
Shock Absorbers
Bilstein 46mm Monotube Shock Absorber – 24-184830
- Bilstein 24-184830 front heavy duty 46mm monotube gas-charged shock absorber
- Part of the 4600 Series; Direct Fit front position, fit to be confirmed before ordering
- Yellow finish; old part numbers BILF4-B46-1772-H0 and BILF4-B46-1772-H1
- UPC 651860612447
SKU: BIL24-184830 -
Shock Absorbers
Bilstein 4600 Series Shock Absorber – 24-184809
- Bilstein 4600 Series monotube shock absorber, part number 24-184809
- Fits 1984-1996 Ford Bronco and 1980-1996 Ford F-150 per the manufacturer list
- 2 in body diameter, yellow finish, gas charged, boots included
- No reservoir
SKU: BIL24-184809 -
-
Shock Absorbers
Bilstein 5100 Series Shock Absorber – 24-146715
- Bilstein 24-146715, a 5100 Series monotube gas shock for lifted trucks and Jeeps
- Collapsed length 15.39 in, extended length 26.38 in, travel 10.99 in
- Fits 2007–2018 Jeep Wrangler (JK) models across the listed trims
- Boot included, sold as each
SKU: BIL24-146715 -
Shock Absorbers
Bilstein 5100 Series Shock Absorber – 24-146708
- Fits 2007–2018 Jeep Wrangler (JK), 2-door and 4-door, per the manufacturer fitment list
- Bilstein 5100 Series front monotube shock, part number 24-146708
- Extended 24.63 inches, collapsed 14.98 inches, travel 9.65 inches
- For front lifted height 1.5-3″; boot included; must use wheel spacers or offset wheels
SKU: BIL24-146708 -
How the suspension parts relate
A 4x4 suspension is a system. Springs, whether coil or leaf, hold up the vehicle. Shocks control how fast those springs move. Control arms, track bars, and traction bars locate the axle. Bushings and sway bar links cushion and connect parts. When you change one element, such as lift height, other parts often need to change too, which is why complete lift kits exist alongside individual parts.
Where to begin
- Rough or floaty ride: start with shocks. Series like Rancho RS5000, Bilstein 5100, and Fox 2.0 differ in valving and design.
- More ground clearance and tire room: a lift kit or leveling kit, picked by lift height.
- Sagging or tired leaf springs: replace the springs with new leaf springs, plus bushings, shackles, and hardware.
- Clunks or looseness: check bushings, sway bar links, and track bar parts.
Specs to compare
For shocks, compare piston and rod diameter, twin tube versus monotube construction, valving, and reservoir options. For lift kits, compare lift height, shock inclusion, and the maximum tire size. For springs, compare leaf count, rate, and whether bushings are included. For bushings, note material, such as polyurethane or rubber, and size. Fitment notes such as front or rear, 2WD or 4WD, and year range matter as much as the specs.
Installation and safety
Suspension work involves heavy parts and stored spring energy, and it affects steering and braking. Use proper jack stands, follow the manufacturer torque specifications, and tighten bushing bolts with the vehicle at ride height. A professional alignment is needed after most changes, and a shop installation is a good idea if you are not experienced.
Confirming compatibility
Suspension parts are vehicle specific. Confirm fitment for your exact year, make, model, drive type, and cab or wheelbase, and check the manufacturer specifications on each product page. Lift height and tire size rules vary by state, so check local regulations.
Because suspension modifications interact, plan the whole setup rather than buying parts piecemeal. Decide on your tire size and lift height first, then select shocks, springs, and supporting parts that suit that target, and budget for the alignment and any driveline corrections that follow.
Maintenance and inspection
Suspension parts wear slowly, so inspect them on a schedule. Look for torn bushings, leaking shocks, cracked leaf spring eyes, loose U-bolts, and bent track bars. Check torque on U-bolts and control arm bolts after the first few hundred miles following any work, then at routine service. Grease any fittings that call for it. Keep mud and debris out of the spring packs, which can wear leaves and cause squeaks. Match both sides when replacing worn components, since mixing new and old shocks or springs gives uneven handling. Be careful with mixed brands in one system, as damping and spring rates are designed to complement each other, and keep records of what you installed. When in doubt about a part, the manufacturer's specifications and installation instructions are the final word on torque values and compatibility. Keep notes of what you changed and when.
Popular Suspension brands
- Pro Comp Suspension (1,873)
- Bilstein (638)
- Rancho (616)
- Skyjacker (534)
- Fabtech (533)
- Rubicon Express (513)
- Fox Racing Shox (349)
- ARB 4x4 Accessories (267)
- Daystar (210)
- Energy Suspension (205)
- Tuff Country (192)
- Rough Country (191)
Shop Suspension by type
- Shock Absorbers (3,453)
- Lift Kits (1,736)
- Suspension Leveling Kits (350)
- Leaf Spring (278)
- Suspension Block and U-Bolt Kit (153)
- Leaf Spring Bushings & Pads (142)
- Sway Bar Bushings & Brackets (134)
- Leaf Spring Shackle Kit (102)
- Shock Absorber Boot (76)
- Shock Absorber Bushing (67)
- Track Bar Bracket (62)
- Lift Kit-Suspension Component (54)
- Leaf Spring Shackle Bushing (53)
- Sway Bar Assemblies (50)
- Suspension Block (52)
- Long Arm Upgrade (45)
- Shackle Reversal Kits (36)
- Track Bar Bushings (34)
- Leveling Compressor Kits (34)
- Limiting Strap (34)
- Leaf Spring Bolt (23)
- Leaf Spring Hanger (22)
- Leaf Spring Plate (21)
- Master Bushing Kit (20)
- Traction Bar (18)
- Spindle (16)
- Shock Absorber Rebuild Kit (15)
- Shock Absorber Extension (15)
- Traction Bar Bracket (15)
- Rack & Pinion Bushing (12)
Suspension FAQ
What should I upgrade first on my suspension?
Shocks are a common first step because they improve control and comfort without changing height. If you want more clearance or bigger tires, a lift or leveling kit is the next step.
What is the difference between a lift kit and a leveling kit?
A lift kit raises the whole vehicle, often with new springs or components, while a leveling kit usually raises just the front to match the rear. Both change geometry, so alignment is needed.
How do I know if my shocks are worn?
Signs include a bouncy or floaty ride, nose dive under braking, leaking fluid, and uneven tire wear. Shocks wear gradually, so replace them in pairs on an axle and check them regularly for leaks.
Do I need new bushings with new springs?
Often yes, particularly with leaf springs. Worn bushings cause noise and sloppy handling, and replacing them while the parts are already apart saves a good deal of labor later.











