Overview
The Bilstein 24-184809 is a 4600 Series monotube, gas-charged shock absorber for the 1984-1996 Ford Bronco and the 1980-1996 Ford F-150. The shock has a 2 in body diameter, a yellow finish and no external reservoir, and boots are included.
Bilstein describes its monotube gas-pressure design as one that transfers heat from the oil to the outer surface of the shock body, where it dissipates. A dividing piston lets the oil expand as it heats, which Bilstein says prevents aeration, foaming and viscosity loss, so the shock keeps its damping characteristics as temperatures rise. The tube is made by a special extrusion method and the piston head lets compression and rebound damping be tuned independently.
Key features
- 4600 Series monotube design
- Gas charged (hydraulic and gas pressure)
- 2 in body diameter
- Yellow finish
- No reservoir
- Boots included
- Bilstein says its seamless tube is made by a special extrusion method with consistent wall thickness
- Compression and rebound damping can be tuned independently.
- Direct fit
Choosing a replacement shock
A shock absorber controls how quickly the springs compress and rebound, which keeps the tires in contact with the road over bumps and during braking. On an older Bronco or F-150, worn shocks often show up as bouncing after dips, nose dive under braking, or cupping on the front tires. Replacing a worn unit often restores the original ride and steering feel.
Monotube gas-charged designs keep the oil under pressure, which helps resist foaming when the shock works hard on a long drive. When comparing options, look at body size, mounting style and travel length against the old shock, since a shock that is too long or too short can bind or bottom out. If the truck has been lifted or fitted with larger tires, consider whether a stock-length shock still has enough travel for the new setup.
- Measure the old shock’s collapsed and extended lengths before ordering
- Look for oil residue on the shock body, which can signal seal failure
- Check the bushings and mounts while the old shock is off
- Keep the old shock on hand to compare mounting points
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-184809 |
| UPC | 651860402666 |
| Product type | Shock absorber |
| Series | 4600 Series |
| Type | Monotube |
| Hydraulic / gas | Gas charged |
| Body diameter | 2 in |
| Finish | Yellow |
| Reservoir | No |
| Boots | Included |
| Fit type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the Bilstein 24-184809 includes:
- 1984–1996 Ford Bronco (Custom, Eddie Bauer, XL, XLT, XLT Lariat, XLT Nite, XLT Sport)
- 1980–1996 Ford F-150 (Base, Custom, Eddie Bauer, Ranger, Ranger Lariat, Ranger XLT, Special, XL, XLS, XLT, XLT Lariat)
It fits the 1984-1996 Ford Bronco and 1980-1996 Ford F-150 in the trims shown above. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Shocks affect handling and braking stability, so professional installation is a good idea. Support the vehicle on rated jack stands, replace shocks in axle pairs, and torque every fastener to the correct specification for your vehicle.
Check that the shock length suits the vehicle’s ride height and travel before installation, re-check the mounting hardware after the first miles of driving, and check the shocks for leaks over time.
What’s included
- Shock absorber
- Boots
Not included: Mounting hardware or bushings; check the package contents against your installation before starting.









