Overview
The Bilstein 24-146715 is a 5100 Series monotube gas-pressure shock absorber for the 2007–2018 Jeep Wrangler (JK), listed on the manufacturer fitment list for several JK trims. Bilstein designs the 5100 Series for lifted trucks, Jeeps and prerunners.
Bilstein’s 5100 Series uses a single tube with high gas pressure for steady performance and long service life. This unit has a 46mm smooth body with a non-coilover design, a 14mm shaft and a zinc plated finish. It is built to use the stock O.E.M. mounting configuration on specific manufacturer lift kits.
Key features
- Monotube gas pressure construction
- Self-adjusting deflecting disc valving
- High-flow piston that Bilstein says reduces harshness
- Independent rebound and compression tuning
- Larger working piston area for damping control
- Designed for control with large diameter tires
Before you buy
A shock absorber works with the springs, bushings and steering components to control body motion. On a Wrangler JK, a replacement shock is often installed alongside new bushings or a track bar when the old parts show wear, so inspect those components while the vehicle is apart.
Single tube gas shocks like this one keep the damping fluid under pressure, which helps reduce foaming during repeated hard compressions. Heat from prolonged off-road use is a common cause of fade, so check that the body and mounts are clear of heat sources and debris.
Before installing, measure the collapsed and extended lengths of the old unit and compare them with the listed figures. Mounting eye and bar pin sizes should match the existing hardware, and any lift kit should be confirmed as compatible before the new shock goes on.
- Compare old and new lengths before installation
- Inspect bushings and mounts for wear
- Check the boot is seated and undamaged
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-146715 |
| UPC | 651860598508 |
| Shock series | Bilstein 5100 Series |
| Collapsed length | 15.39 in |
| Extended length | 26.38 in |
| Travel length | 10.99 in |
| Lower mount | Eye, 12.1mm |
| Upper mount | Bar pin |
| Shaft diameter | 14mm |
| Body design | 46mm ID smooth body, non-coilover |
| Internal design | Monotube |
| Finish | Zinc plated |
| Reservoir | No |
| Boot included | Yes |
| Sold as | Each |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler (JK), including the 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, plus the Unlimited versions of those trims.
The list does not cover the Wrangler TJ, LJ or JL generations, and it stops at the JK model years. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 5100 Series is designed for specific manufacturer lift kits using the stock O.E.M. mounting configuration, so confirm your lift kit matches this shock before installing it.
What’s included
One 5100 Series monotube shock absorber with boot included, sold as each.














