Select your vehicle

Bilstein 4600 Series Shock Absorber – 24-184977

Bilstein

$92.00In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 17, 2026 4:30 PM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rear right shock for the 1995-2004 Toyota Tacoma
  • Bilstein 4600 Series monotube, gas charged, yellow
  • 2 in body diameter, boots included, no reservoir
  • For stock height (0 in. lift or drop)

Description

Overview

The Bilstein 24-184977 is a 4600 Series monotube gas-charged rear right shock absorber with a 2 inch body diameter and a yellow finish. It fits the 1995-2004 Toyota Tacoma.

The monotube gas-charged design moves heat from the oil to the outer shock body, where it dissipates. A dividing piston lets the oil expand as it heats, which is designed to prevent aeration and foaming and keeps damping consistent as temperatures rise.

The tube is formed by a special extrusion method with a tight peak-to-valley tolerance and consistent wall thickness. The piston head lets compression and rebound damping be tuned independently, and the shock is set for 0 in. lift or drop.

Key features

  • Monotube, gas-charged design
  • Bilstein 4600 Series, rear right position
  • 2 inch body diameter
  • Yellow finish
  • Boots included
  • No reservoir
  • Built for stock height (0 in. lift or drop)
  • Seamless extruded tube

Replacement considerations

A rear shock works with the springs, axle and bushings to control how the truck settles and rebounds. A worn shock can cause a bouncy ride, uneven tire wear, or a rear end that drops more on one side. Those signs usually show up after many miles, and they are easy to miss when the change happens slowly.

Before replacing one side, check the shock mounts, bushings and any damaged boots, since these affect how the new shock performs. Replacing both rear shocks together keeps damping even from side to side. Keep the old shock until the new one is confirmed to fit.

  • Check mounting bushings and hardware
  • Look for leaks along the body
  • Match both rear shocks when replacing

Specifications

Brand Bilstein
Part number 24-184977
UPC 651860403212
Product type Monotube shock absorber
Series 4600 Series
Position Rear right
Body diameter 2 in
Type Monotube, gas charged
Finish Yellow
Reservoir No
Boots Included
Lift height w/0 in. lift/drop
Fitment type Direct fit

Vehicle fitment

The stored manufacturer fitment list for the Bilstein 24-184977 covers the 1995-2004 Toyota Tacoma (Base, Limited, Pre Runner, S-Runner, SR5).

Only the 1995-2004 Toyota Tacoma is covered. Later Tacoma generations and other Toyota trucks are not included. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Suspension, steering and axle components are safety-critical, so professional installation is recommended. Follow the installation instructions and torque every fastener to the specified values.

  • Support the vehicle on rated jack stands on level ground; never work under a vehicle held only by a jack.
  • Inspect nearby bushings, mounts and hardware while the area is open, and replace anything worn.
  • Re-check fastener torque after the first miles of driving, and again at regular service intervals.
  • Have the alignment checked after any suspension or steering work.
  • Confirm tire, brake line and wiring clearance through the full range of suspension travel before driving normally.

What’s included

One Bilstein 4600 Series shock absorber with boots.

Not included: Shocks for the other positions and mounting hardware.

SKU: BIL24-184977 Category:

Specification

Shipping weight 4.25 lbs
Package dimensions 26.80 × 3.00 × 3.00 in
brands

Fitment

VehicleYearsTrims
Toyota Tacoma1995–2004Base, Limited, Pre Runner, S-Runner, SR5

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the Bilstein 24-184977 fit a Toyota Tacoma?

It is for the 1995-2004 Toyota Tacoma in the Base, Limited, Pre Runner, S-Runner and SR5 trims. Later Tacoma years are not covered, so confirm your year before ordering.

Where does the Bilstein 24-184977 mount?

The attribute list gives the position as rear right, so it is a single rear shock for one side of the truck. You need another shock for the other side.

Does the Bilstein 24-184977 include boots?

Yes. It includes boots, which protect the shock body and piston rod from dirt and moisture. It has a 2 in body diameter, a yellow finish and no reservoir.

Is the Bilstein 24-184977 for a lifted Tacoma?

No, it is set for stock ride height at 0 in. lift or drop, so it is intended for a truck that has not been lifted or lowered.

Should both rear shocks be replaced together?

Replacing both rear shocks at the same time keeps damping and ride height even from side to side. Mixing a new shock with a worn one can change handling and wear on the axle. Inspect both sides before deciding.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon