Overview
The Bilstein 24-184854 is a rear gas-charged monotube shock from the 4600 Series, with a 2 in body and a yellow finish. It fits the 1994–2001 Dodge Ram 1500 in Base, LT, Laramie, ST, Sport and WS trims, plus the 1994–2002 Dodge Ram 2500 and 3500 in Base trim. It suits owners replacing worn rear damping on these full-size Ram trucks.
A rear shock controls how fast the springs compress and rebound, which helps the tires stay in contact with the road over bumps and washboard. This monotube design moves oil heat to the outer shock body, and a dividing piston lets the oil expand as it warms so it does not foam or thin out. The piston head can be tuned for compression and rebound separately, and the monotube body is built for tube strength and shock life under heat.
Key features
- Patented monotube gas-charged design that moves oil heat to the shock body surface
- Dividing piston lets the oil expand as temperatures rise, limiting aeration (foaming) and loss of viscosity
- Seamless monotube tube made by a special extrusion process for tight peak-to-valley tolerance and consistent wall thickness
- Piston head with independent compression and rebound damping tuning and fewer parts than many twin-tube designs
- Boots included with the yellow-finished body
Rear damping and ride comfort
Rear shocks carry much of the load on washboard roads and when the truck is loaded. Worn units let the rear end bounce, skip over bumps or sag under weight, and they can wear the rear tires unevenly. A monotube body handles heat better than many older designs, so damping stays steadier on longer drives. Owners working on full-size Ram trucks often find that replacing both rear shocks restores a balanced ride.
Choosing a replacement means matching body size, mounting eye type and damping feel to the truck you drive. Check the rubber bushings and mounting hardware when the shock comes off, because worn bushings can make a new shock knock. Keep the boots in good shape, since torn boots let dirt reach the shaft and wear the seals faster.
- Check mount bushings for cracks
- Inspect the shock shaft for pitting or oil film
- Replace rear shocks in pairs when wear is uneven
- Use the same mounting hardware for the new unit
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-184854 |
| UPC | 651860417943 |
| Shock series | 4600 Series |
| Type | Monotube, gas charged |
| Position | Rear |
| Body diameter | 2 in |
| Finish | Yellow |
| Reservoir | No |
| Boots included | Yes |
| Fitment type | Direct fit |
| Lift height | 0 in. lift/drop |
Vehicle fitment
The manufacturer fitment list covers the 1994–2001 Dodge Ram 1500 in Base, LT, Laramie, ST, Sport and WS trims, plus the 1994–2002 Dodge Ram 2500 and Ram 3500 in Base trim. This shock is for the rear position.
Ram 1500 models after 2001 and Ram 2500 and 3500 models after 2002 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Boots are included with the shock.
Not included: Check mounting hardware needs against your installation before starting.









