Overview
The Bilstein 24-184885 is a 4600 Series rear shock absorber for the 1998-2004 Nissan Frontier in Base, SC, SE and XE trims. It is a gas-charged monotube shock with a yellow finish, a 2 in body diameter, boots included and no external reservoir. It is a direct fit with 0 in lift/drop.
The gas-charged monotube body moves heat out of the oil through the shock body, which helps it dissipate heat efficiently. A dividing piston lets the oil expand as temperatures rise, so damping is less affected by aeration or viscosity loss. The tube is formed by an extrusion method for tight peak-to-valley tolerance, and the piston head can be tuned for compression and rebound. The design uses fewer parts than twin-tube and road-sensing shocks.
Key features
- Fits the 1998-2004 Nissan Frontier in four trims
- Gas-charged monotube body for heat transfer from the oil
- Dividing piston for oil expansion as temperatures rise
- Extruded tube with tight tolerance and even wall thickness
- Compression and rebound damping can be tuned separately
- Boots included with a yellow finish
- Rear position within the 4600 Series
Frontier rear shock upkeep
Rear shocks on a Frontier work hard on washboard roads, on rough trails and when the bed carries load. A gas-charged monotube body is designed to keep damping steady as the oil warms, but the seals and bushings still wear over time. Inspect the shock body for oil film, check for clunks when the rear end shifts, and watch for tires that wear along one edge.
When replacing a rear unit, match the mount style and length to the original and take a measurement before ordering. Boots protect the shaft from grit, so replace them quickly if they tear. Rear shocks are commonly replaced as a pair so both sides damp evenly and the truck tracks straight.
- Check mounts and bushings for cracks
- Inspect boots for tears after off-road trips
- Look for oil film on the shaft
- Replace a pair when one side wears faster
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-184885 |
| UPC | 651860449296 |
| Shock series | 4600 Series |
| Position | Rear |
| Type | Monotube |
| Hydraulic / gas charged | Gas charged |
| Body diameter | 2 in |
| Reservoir | No |
| Boots included | Yes |
| Finish | Yellow |
| Lift / drop | 0 in |
| Fitment type | Direct fit |
Vehicle fitment
This shock covers the 1998-2004 Nissan Frontier in Base, SC, SE and XE trims. No other Nissan model is covered, and no Frontier years outside 1998 through 2004 are included.
Years outside the 1998 to 2004 range are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Rear shocks on this design are gas charged and pressurized, so keep the body away from heat and do not open or puncture it. Check the rear mounting positions on your Frontier against the removed shock before tightening.
What’s included
One 4600 Series rear shock absorber with boots. Plan for mounting hardware before installing the shock.









