Overview
The Bilstein 4600 Series front shock absorber, part number 24-184915, is a heavy duty 46mm monotube gas-charged shock for 1994–2001 Dodge Ram pickups. It fits the Ram 1500, Ram 2500 and Ram 3500 in the trims set out under Vehicle fitment.
Its monotube gas pressure design keeps damping consistent and supports handling and stability while preserving ride comfort. It is a direct-fit replacement for the front position, and at 0 in. lift/drop it replaces the original shock at stock height.
Key features
- Heavy duty construction with a 46mm monotube body
- Gas charged design that Bilstein describes as strong damping for firm street control
- Front position, direct fit
- Steel body with a yellow paint finish
- Stock height, with 0 in. lift/drop
Front shock maintenance
Front shocks absorb bumps and also carry braking loads, so a worn unit affects steering feel as well as ride comfort. Watch for fluid on the body, bouncing after dips, and cupped wear on the front tires. A gas-charged design holds damping steadier as it heats, but the seals still wear, so inspect them when you service the brakes or steering.
Replace worn front shocks in pairs so both sides control the springs the same way. Check the upper and lower mounts, the bushings and the bump stops while the shocks are off, because a loose mount can make a new unit feel vague. Do not heat or cut a pressurized body, and have a technician handle any service that involves the gas charge.
- Look for leaks on the shock body
- Check upper and lower mounts
- Inspect bump stops and bushings
- Replace in pairs for even damping
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-184915 |
| UPC | 651860616025 |
| Series | 4600 Series |
| Position | Front |
| Type | Heavy duty monotube, 46mm |
| Hydraulic / gas charged | Gas charged |
| Body material | Steel |
| Finish | Yellow |
| Lift / drop | 0 in. |
| Fitment type | Direct fit |
| Former part numbers | BILF4-B46-2129-H1, BILF4-B46-2129-H2 |
Vehicle fitment
The manufacturer fitment list includes this shock for:
- 1994–2001 Dodge Ram 1500 (Base, LT, Laramie, ST, Sport)
- 1994–2001 Dodge Ram 2500 (Base)
- 1994–2001 Dodge Ram 3500 (Base)
Other Ram generations, Ram trims outside the ones above, and other Dodge vehicles fall outside this shock’s coverage. Match your year, model and trim to the trims set out above before ordering.
What’s included
One front shock absorber, part number 24-184915. Mounting hardware needs should be checked against your installation.









