Suspension
Showing 5917–5928 of 7279 resultsSorted by popularity
-
Shock Absorbers
Bilstein 5165 Series Reservoir Shock Absorber – 25-187717
- Bilstein 5165 Series reservoir shock absorber, part number 25-187717
- Gas-charged monotube with a remote reservoir for more shock oil capacity
- Universal fit for custom lifted trucks and SUVs
- Includes reservoir mounting kit and detailed instructions
SKU: BIL25-187717 -
Shock Absorbers
Bilstein 5165 Series Reservoir Shock Absorber – 25-187700
- Bilstein 5165 Series reservoir shock absorber, part number 25-187700
- Remote reservoir adds shock oil capacity and helps heat dissipation
- Monotube design with digressive valving and Triple-C Technology finish
- Universal fit; confirm mounting and length for your truck or SUV
SKU: BIL25-187700 -
Shock Absorbers
Bilstein 5160 Series Reservoir Shock Absorber – 25-187694
- Bilstein 5160 Series rear reservoir shock, part number 25-187694
- Collapsed length 18.25 in., extended length 31.46 in.
- Long travel of 13.21 in. with eye mounts at both ends
- 14mm shaft, 46mm ID smooth body, gas charged
- Includes reservoir mount kit only
SKU: BIL25-187694 -
Shock Absorbers
Bilstein 5160 Series Reservoir Shock Absorber – 25-187687
- Fits Chevrolet Silverado and GMC Sierra 1500 HD, 2500, 2500 HD, 3500 and 3500 HD models
- Years run from 1999 to 2010, with 2007 Classic models included
- Front position, part number 25-187687, 9 in. travel
- Lower eye 14.1mm, upper stem mount, 14mm shaft
- Includes upper mount kit and reservoir frame mount kit
SKU: BIL25-187687 -
Shock Absorbers
Bilstein 5160 Series Reservoir Shock Absorber – 25-187670
- Bilstein 5160 Series front reservoir shock, part number 25-187670
- Collapsed length 14.44 in., extended length 24.49 in., travel 10.05 in.
- Lower bar mount and upper stem mount, 14mm shaft
- Includes upper mount kit and reservoir mount kit
- Confirm fit for your vehicle’s year, model and trim before ordering.
SKU: BIL25-187670 -
Shock Absorbers
Bilstein 5160 Series Reservoir Shock Absorber – 25-187663
- Fits the 2007–2018 Jeep Wrangler (JK) in the trims covered by this fitment
- Rear position Bilstein 5160 Series reservoir shock, part number 25-187663
- Collapsed length 14.95 in., extended length 25 in., travel 10.05 in.
- 14mm shaft, 46mm ID smooth body, mono tube design
- Includes reservoir mount kit and detailed instructions
SKU: BIL25-187663 -
Shock Absorbers
Bilstein 5160 Series Reservoir Shock Absorber – 25-187656
- Bilstein 5160 Series front reservoir shock absorber, part number 25-187656
- Lift range 1.5 to 3 in., direct fit
- Collapsed 14.53 in., extended 24.7 in., travel 10.17 in.
- 2007–2018 Jeep Wrangler (JK) trims listed by Bilstein
- Upper mount kit and reservoir mount kit included
SKU: BIL25-187656 -
Shock Absorbers
Bilstein 5160 Series Reservoir Shock Absorber – 25-187649
- Bilstein 5160 Series rear reservoir shock absorber, part number 25-187649
- Covers 2007–2018 Jeep Wrangler JK trims as Bilstein lists them
- Collapsed 15.91 in., extended 27.46 in., travel 11.55 in.
- Lift/drop rating of 0 in.
SKU: BIL25-187649 -
Shock Absorbers
Bilstein 5160 Series Reservoir Shock Absorber – 25-187632
- Bilstein 5160 Series front reservoir shock absorber, part number 25-187632
- Bilstein lists fitment for 2007–2018 Jeep Wrangler (JK)
- Lift range 3.5 to 5 in., collapsed 15.91 in., extended 27.46 in.
- Upper mount kit and reservoir mount kit included
SKU: BIL25-187632 -
Shock Absorbers
Bilstein 5160 Series Reservoir Shock Absorber – 25-187625
- Bilstein 5160 Series rear reservoir shock absorber, part number 25-187625
- Fits Chevrolet and GMC full-size trucks and SUVs, 1999–2013, plus 2003–2009 Hummer H2 Base
- Collapsed 16.14 in., extended 27.17 in., 11.03 in. travel
- Rated for 0 to 1 in. lift
- UPC 651860665573
SKU: BIL25-187625 -
Shock Absorbers
Bilstein 5160 Series Reservoir Shock Absorber – 25-187618
- Bilstein 5160 Series front reservoir shock absorber, part 25-187618
- Mono tube, gas charged design with a remote reservoir and floating dividing piston
- Collapsed length 10.79 in., extended length 16.24 in., travel length 5.45 in.
- Stem upper mount, eye lower mount (14.1mm), 14mm shaft diameter
- Lift height rating 0 to 2.5 in.; no specific vehicle named, Direct Fit
- Upper mount kit and reservoir frame mount kit included
SKU: BIL25-187618 -
Shock Absorbers
Bilstein 5160 Series Reservoir Shock Absorber – 25-187601
- Bilstein 5160 Series reservoir shock absorber, part 25-187601, rear position
- Mono tube, gas charged design with a remote reservoir for extra shock oil capacity
- Collapsed length 16.54 in., extended length 28.09 in., travel length 11.55 in.
- Eye mounts at both ends (14.4mm), 14mm shaft diameter, zinc plated finish
- Lift height rating 0 to 2 in.; no specific vehicle named, Direct Fit
- Reservoir mounting kit included; boot not included
SKU: BIL25-187601
How the suspension parts relate
A 4x4 suspension is a system. Springs, whether coil or leaf, hold up the vehicle. Shocks control how fast those springs move. Control arms, track bars, and traction bars locate the axle. Bushings and sway bar links cushion and connect parts. When you change one element, such as lift height, other parts often need to change too, which is why complete lift kits exist alongside individual parts.
Where to begin
- Rough or floaty ride: start with shocks. Series like Rancho RS5000, Bilstein 5100, and Fox 2.0 differ in valving and design.
- More ground clearance and tire room: a lift kit or leveling kit, picked by lift height.
- Sagging or tired leaf springs: replace the springs with new leaf springs, plus bushings, shackles, and hardware.
- Clunks or looseness: check bushings, sway bar links, and track bar parts.
Specs to compare
For shocks, compare piston and rod diameter, twin tube versus monotube construction, valving, and reservoir options. For lift kits, compare lift height, shock inclusion, and the maximum tire size. For springs, compare leaf count, rate, and whether bushings are included. For bushings, note material, such as polyurethane or rubber, and size. Fitment notes such as front or rear, 2WD or 4WD, and year range matter as much as the specs.
Installation and safety
Suspension work involves heavy parts and stored spring energy, and it affects steering and braking. Use proper jack stands, follow the manufacturer torque specifications, and tighten bushing bolts with the vehicle at ride height. A professional alignment is needed after most changes, and a shop installation is a good idea if you are not experienced.
Confirming compatibility
Suspension parts are vehicle specific. Confirm fitment for your exact year, make, model, drive type, and cab or wheelbase, and check the manufacturer specifications on each product page. Lift height and tire size rules vary by state, so check local regulations.
Because suspension modifications interact, plan the whole setup rather than buying parts piecemeal. Decide on your tire size and lift height first, then select shocks, springs, and supporting parts that suit that target, and budget for the alignment and any driveline corrections that follow.
Maintenance and inspection
Suspension parts wear slowly, so inspect them on a schedule. Look for torn bushings, leaking shocks, cracked leaf spring eyes, loose U-bolts, and bent track bars. Check torque on U-bolts and control arm bolts after the first few hundred miles following any work, then at routine service. Grease any fittings that call for it. Keep mud and debris out of the spring packs, which can wear leaves and cause squeaks. Match both sides when replacing worn components, since mixing new and old shocks or springs gives uneven handling. Be careful with mixed brands in one system, as damping and spring rates are designed to complement each other, and keep records of what you installed. When in doubt about a part, the manufacturer's specifications and installation instructions are the final word on torque values and compatibility. Keep notes of what you changed and when.
Popular Suspension brands
- Pro Comp Suspension (1,873)
- Bilstein (638)
- Rancho (616)
- Skyjacker (534)
- Fabtech (533)
- Rubicon Express (513)
- Fox Racing Shox (349)
- ARB 4x4 Accessories (267)
- Daystar (210)
- Energy Suspension (205)
- Tuff Country (192)
- Rough Country (191)
Shop Suspension by type
- Shock Absorbers (3,453)
- Lift Kits (1,736)
- Suspension Leveling Kits (350)
- Leaf Spring (278)
- Suspension Block and U-Bolt Kit (153)
- Leaf Spring Bushings & Pads (142)
- Sway Bar Bushings & Brackets (134)
- Leaf Spring Shackle Kit (102)
- Shock Absorber Boot (76)
- Shock Absorber Bushing (67)
- Track Bar Bracket (62)
- Lift Kit-Suspension Component (54)
- Leaf Spring Shackle Bushing (53)
- Sway Bar Assemblies (50)
- Suspension Block (52)
- Long Arm Upgrade (45)
- Shackle Reversal Kits (36)
- Track Bar Bushings (34)
- Leveling Compressor Kits (34)
- Limiting Strap (34)
- Leaf Spring Bolt (23)
- Leaf Spring Hanger (22)
- Leaf Spring Plate (21)
- Master Bushing Kit (20)
- Traction Bar (18)
- Spindle (16)
- Shock Absorber Rebuild Kit (15)
- Shock Absorber Extension (15)
- Traction Bar Bracket (15)
- Rack & Pinion Bushing (12)
Suspension FAQ
What should I upgrade first on my suspension?
Shocks are a common first step because they improve control and comfort without changing height. If you want more clearance or bigger tires, a lift or leveling kit is the next step.
What is the difference between a lift kit and a leveling kit?
A lift kit raises the whole vehicle, often with new springs or components, while a leveling kit usually raises just the front to match the rear. Both change geometry, so alignment is needed.
How do I know if my shocks are worn?
Signs include a bouncy or floaty ride, nose dive under braking, leaking fluid, and uneven tire wear. Shocks wear gradually, so replace them in pairs on an axle and check them regularly for leaks.
Do I need new bushings with new springs?
Often yes, particularly with leaf springs. Worn bushings cause noise and sloppy handling, and replacing them while the parts are already apart saves a good deal of labor later.











