Overview
The Bilstein 5160 Series rear reservoir shock absorber, part number 25-187694, is a gas charged mono tube shock with a remote reservoir. It installs in the factory shock location on pickups and SUVs, with no cutting or welding.
This rear shock has eye mounts at both ends, 14.4mm each, and a longer travel of 13.21 in. than many shocks in this series. The 46mm ID smooth body and 14mm shaft carry the reservoir, which holds the floating dividing piston that adds wheel travel and shaft movement. No vehicle application is named for this part number.
Key features
- Remote reservoir increases shock oil capacity and damping sensitivity
- Digressive valving produces full damping right away
- Floating dividing piston sits inside the reservoir
- Mono tube design for performance on and off road
- Triple-C Technology finish provides easy care
- Reservoir mounting setup specific to each vehicle application
Long travel and clearance
Long-travel rear shocks let the axle move farther before the damping limits it, which can help on uneven ground. That extra travel also means the shock spends more time near full extension, so the upper and lower mounts take more load over time. Checking the collapsed and extended lengths against the current shock before installation helps avoid binding or bottoming out.
A reservoir shock adds oil capacity, but the reservoir needs room and protection from rocks and mud. Inspect the eye mounts, the bushings and the reservoir clamp at regular intervals, especially after heavy rear loads or rough trails. Replace worn bushings with the shock so the new unit starts with solid mounting points.
- Compare collapsed length with the old shock
- Check the eye mounts for wear
- Look for reservoir rubbing marks after travel
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 25-187694 |
| UPC | 651860649443 |
| Series | 5160 Series |
| Position | Rear |
| Collapsed length | 18.25 in. |
| Extended length | 31.46 in. |
| Travel length | 13.21 in. |
| Lower mount | Eye, 14.4mm |
| Upper mount | Eye, 14.4mm |
| Shaft diameter | 14mm |
| Body design | 46mm ID smooth body (non-coilover) |
| Internal design | Mono tube |
| Reservoir | Yes |
| Gas charged | Yes |
| Finish | Zinc plated |
| Boot included | No |
| Mounting parts included | Reservoir mount kit |
| Lift height listed | w/4 in. lift |
| Fitment type | Direct fit |
Vehicle fitment
Vehicle fitment for part number 25-187694 has no year, make, model or trim attached. Make sure the year, model and trim match your truck or SUV before ordering.
Because this is a long-travel rear shock with eye mounts at both ends, compare the 18.25 in. collapsed length with your current shock before installing. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The reservoir mount kit is the only mounting hardware included. This shock carries a 4 in. lift rating, so check reservoir clearance and hose routing after installation.
What’s included
The package includes the reservoir mount kit and detailed instructions.
Not included: A dust boot, and the upper mount hardware beyond the eye mount, since only the reservoir mount kit is listed.









