Overview
The Bilstein 5160 Series front reservoir shock absorber, part number 25-187632, is a gas-charged mono tube shock built for the 2007–2018 Jeep Wrangler (JK). Bilstein lists fitment across the 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, including the Unlimited versions of those trims.
Built as a reservoir shock, it moves the damping oil into a remote tank for more capacity and better heat dissipation. It installs in the stock shock location without cutting or welding. The lift range is 3.5 to 5 in., so match it to your suspension height. The Triple-C Technology zinc plated finish is easy to care for.
Key features
- Remote reservoir for greater shock oil capacity and heat dissipation
- Digressive valving that delivers full damping capability at once
- Floating dividing piston in the reservoir for increased wheel travel
- Reservoir mounting configuration set for each application
- Upper stem mount with a 12.1mm lower eye
- Zinc plated Triple-C Technology finish
Wrangler JK front suspension upkeep
On a Wrangler JK, the front shocks work with the track bar, steering components and lift parts, so a new reservoir shock is best judged as part of the whole front end. Off-road trips with heavy throttle and long descents put the most heat into the damper, and a remote reservoir gives that heat more room to leave the oil. On pavement the difference shows up as steadier control over washboard sections and highway ripple.
Before installing, check the upper stem mount, the lower eye and the reservoir bracket for play or cracks. Keep the hose clear of the steering linkage and exhaust heat. Front shocks take steering and braking loads, so a loose or worn part at either end can change how the new unit behaves.
- Re-check hardware after the first few trail runs
- Keep the reservoir hose away from heat sources
- Inspect bump stops and track bar bushings
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 25-187632 |
| UPC | 651860655246 |
| Shock series | 5160 Series |
| Position | Front |
| Collapsed length | 15.91 in. |
| Extended length | 27.46 in. |
| Travel length | 11.55 in. |
| Lower mount | Eye 12.1mm |
| Upper mount | Stem |
| Shaft diameter | 14mm |
| Body design | 46mm ID smooth body (non-coilover) |
| Internal design | Mono tube |
| Reservoir | Yes |
| Finish | Zinc plated |
| Hydraulic / gas charged | Gas charged |
| Lift range | 3.5 to 5 in. |
| Boot included | No |
| Included | Upper mount kit and reservoir mount kit |
| Sold as | Each |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler (JK) in the 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, plus the Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S and Unlimited X trims.
Wrangler TJ, LJ and JL models are different generations and are not covered, and JK model years outside 2007–2018 are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This is a front reservoir design, and the mounting configuration is set for each vehicle application. Use the upper mount kit and reservoir mount kit supplied with the shock, and follow the instructions that come with them.
What’s included
One Bilstein 5160 Series front reservoir shock with an upper mount kit and a reservoir mount kit.
Not included: a protective boot. This front shock comes without one.









