Overview
The Bilstein 5160 Series front reservoir shock absorber, part number 25-187670, is a gas charged mono tube shock with a remote reservoir for the front of a pickup or SUV. It installs in the factory shock location with no cutting or welding.
A remote reservoir sits apart from the shock body and connects to it, giving the oil more room to cool. The shock has a 46mm ID smooth body (non-coilover), a 14mm shaft and 10.05 in. of travel. Confirm the fit for your vehicle before installing.
Key features
- Remote reservoir adds shock oil capacity for heat dissipation
- Digressive valving gives full damping capability right away
- Floating dividing piston sits in the reservoir for added wheel travel
- Bilstein mono tube internal design
- Triple-C Technology zinc plated finish for easy care
- Reservoir mounting configuration built for the application
Confirming fit before buying
Front reservoir shocks vary by vehicle in length, stem and eye placement, and reservoir bracket position, so confirming fit comes first. Measuring the collapsed and extended length of the shock you are replacing is a practical start. Compare those figures against the new unit, then check the mount type before ordering.
Once the fit is confirmed, a remote reservoir gives oil more room to cool, which matters on long descents and repeated hard use. Keep the hose away from the steering linkage, exhaust and tire path. Check the reservoir bracket and mounts after the first few drives, and again after any suspension change.
- Measure the shock you are replacing
- Confirm stem and bar mount compatibility
- Check hose clearance at full steering lock
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 25-187670 |
| UPC | 651860654874 |
| Series | 5160 Series |
| Position | Front |
| Collapsed length | 14.44 in. |
| Extended length | 24.49 in. |
| Travel length | 10.05 in. |
| Lower mount | Bar mount |
| Upper mount | Stem |
| Shaft diameter | 14mm |
| Body design | 46mm ID smooth body (non-coilover) |
| Internal design | Mono tube |
| Reservoir | Yes |
| Gas charged | Yes |
| Finish | Zinc plated |
| Boot included | No |
| Mounting parts included | Upper mount kit and reservoir mount kit |
| Lift height listed | w/4 in. lift |
| Fitment type | Direct fit |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Do not assume a fit from the 4 in. lift figure alone.
Front reservoir shocks differ by vehicle in length and mounting, so do not assume a fit from the 4 in. lift figure alone. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shock mounts with the upper mount kit and the reservoir mount kit. On a 4 in. lift, check reservoir and hose clearance through full suspension travel after installation.
What’s included
The package includes the upper mount kit, the reservoir mount kit and detailed instructions.
Not included: A dust boot, since the shock is listed with no boot.









