Suspension
Showing 5929–5940 of 7279 resultsSorted by popularity
-
Shock Absorbers
Bilstein 5160 Series Reservoir Shock Absorber – 25-187595
- Bilstein 5160 Series front reservoir shock absorber, part number 25-187595
- Fits 2006–2008 Dodge Ram 1500 and 1994–2013 Ram 2500 and 3500 models
- Collapsed 15.2 in., extended 25.96 in., 10.76 in. travel
- Includes upper mount kit and reservoir frame mount kit
- UPC 651860653464
SKU: BIL25-187595 -
Shock Absorbers
Bilstein 5165 Series Reservoir Shock Absorber – 25-177503
- Monotube reservoir shock for custom lifted trucks and SUVs
- Remote reservoir adds oil capacity and heat dissipation
- Digressive valving and a floating dividing piston in the reservoir
- Reservoir mounting kit and detailed instructions included
SKU: BIL25-177503 -
-
Shock Absorbers
Bilstein 5165 Series Reservoir Shock Absorber – 25-176117
- Bilstein 5165 Series reservoir shock absorber, part number 25-176117
- Universal fit, gas charged monotube design
- Floating dividing piston and remote reservoir
- Triple-C finish with reservoir mounting kit included
SKU: BIL25-176117 -
Shock Absorbers
Bilstein 5165 Series Reservoir Shock Absorber – 25-176100
- Bilstein 5165 Series reservoir shock absorber, part number 25-176100
- Universal fit with gas charged monotube construction
- Remote reservoir for added shock oil capacity
- Includes reservoir mounting kit and instructions
SKU: BIL25-176100 -
-
Shock Absorbers
Bilstein 5100 Series Shock Absorber – 24-276061
- Fits 2001–2007 Toyota Sequoia Limited and SR5 per listed fitment
- Bilstein 5100 series rear shock, part number 24-276061
- Direct fit for 1 inch lifted 2WD and 4WD vehicles
- Monotube design with velocity sensitive digressive piston
- Collapsed length 15.06 in, extended length 23.96 in
SKU: BIL24-276061 -
Shock Absorbers
Bilstein 5100 Series Shock Absorber – 24-275002
- Direct fit rear shock for 2009-2018 Dodge Ram 1500 2WD trucks without air suspension
- Suits up to 1 inch of rear lift
- Collapsed length 16.44 in, extended length 26.04 in
- Bilstein B8 5100 monotube design with zinc plated finish
SKU: BIL24-275002 -
Shock Absorbers
Bilstein 5100 Series Shock Absorber – 24-274951
- Bilstein 5100 Series front shock absorber, part number 24-274951
- Fits 2017–2018 Ford F-250 and F-350 Super Duty, including King Ranch, Lariat, Platinum, XL and XLT trims
- 4WD models only, for a 2 to 2.5 inch lifted application
- Collapsed length 13.46 in., extended length 21.22 in.
SKU: BIL24-274951 -
Shock Absorbers
Bilstein 4600 Series Shock Absorber – 24-269439
- Bilstein 4600 Series rear shock absorber, part number 24-269439
- Fits 2014–2018 Ram 2500 trucks and 14-Current Ram 2500 2WD models
- Gas charged, smooth non-coilover body with 46 mm body diameter
- Yellow finish, without air leveling suspension
- UPC 651860796796
SKU: BIL24-269439 -
How the suspension parts relate
A 4x4 suspension is a system. Springs, whether coil or leaf, hold up the vehicle. Shocks control how fast those springs move. Control arms, track bars, and traction bars locate the axle. Bushings and sway bar links cushion and connect parts. When you change one element, such as lift height, other parts often need to change too, which is why complete lift kits exist alongside individual parts.
Where to begin
- Rough or floaty ride: start with shocks. Series like Rancho RS5000, Bilstein 5100, and Fox 2.0 differ in valving and design.
- More ground clearance and tire room: a lift kit or leveling kit, picked by lift height.
- Sagging or tired leaf springs: replace the springs with new leaf springs, plus bushings, shackles, and hardware.
- Clunks or looseness: check bushings, sway bar links, and track bar parts.
Specs to compare
For shocks, compare piston and rod diameter, twin tube versus monotube construction, valving, and reservoir options. For lift kits, compare lift height, shock inclusion, and the maximum tire size. For springs, compare leaf count, rate, and whether bushings are included. For bushings, note material, such as polyurethane or rubber, and size. Fitment notes such as front or rear, 2WD or 4WD, and year range matter as much as the specs.
Installation and safety
Suspension work involves heavy parts and stored spring energy, and it affects steering and braking. Use proper jack stands, follow the manufacturer torque specifications, and tighten bushing bolts with the vehicle at ride height. A professional alignment is needed after most changes, and a shop installation is a good idea if you are not experienced.
Confirming compatibility
Suspension parts are vehicle specific. Confirm fitment for your exact year, make, model, drive type, and cab or wheelbase, and check the manufacturer specifications on each product page. Lift height and tire size rules vary by state, so check local regulations.
Because suspension modifications interact, plan the whole setup rather than buying parts piecemeal. Decide on your tire size and lift height first, then select shocks, springs, and supporting parts that suit that target, and budget for the alignment and any driveline corrections that follow.
Maintenance and inspection
Suspension parts wear slowly, so inspect them on a schedule. Look for torn bushings, leaking shocks, cracked leaf spring eyes, loose U-bolts, and bent track bars. Check torque on U-bolts and control arm bolts after the first few hundred miles following any work, then at routine service. Grease any fittings that call for it. Keep mud and debris out of the spring packs, which can wear leaves and cause squeaks. Match both sides when replacing worn components, since mixing new and old shocks or springs gives uneven handling. Be careful with mixed brands in one system, as damping and spring rates are designed to complement each other, and keep records of what you installed. When in doubt about a part, the manufacturer's specifications and installation instructions are the final word on torque values and compatibility. Keep notes of what you changed and when.
Popular Suspension brands
- Pro Comp Suspension (1,873)
- Bilstein (638)
- Rancho (616)
- Skyjacker (534)
- Fabtech (533)
- Rubicon Express (513)
- Fox Racing Shox (349)
- ARB 4x4 Accessories (267)
- Daystar (210)
- Energy Suspension (205)
- Tuff Country (192)
- Rough Country (191)
Shop Suspension by type
- Shock Absorbers (3,453)
- Lift Kits (1,736)
- Suspension Leveling Kits (350)
- Leaf Spring (278)
- Suspension Block and U-Bolt Kit (153)
- Leaf Spring Bushings & Pads (142)
- Sway Bar Bushings & Brackets (134)
- Leaf Spring Shackle Kit (102)
- Shock Absorber Boot (76)
- Shock Absorber Bushing (67)
- Track Bar Bracket (62)
- Lift Kit-Suspension Component (54)
- Leaf Spring Shackle Bushing (53)
- Sway Bar Assemblies (50)
- Suspension Block (52)
- Long Arm Upgrade (45)
- Shackle Reversal Kits (36)
- Track Bar Bushings (34)
- Leveling Compressor Kits (34)
- Limiting Strap (34)
- Leaf Spring Bolt (23)
- Leaf Spring Hanger (22)
- Leaf Spring Plate (21)
- Master Bushing Kit (20)
- Traction Bar (18)
- Spindle (16)
- Shock Absorber Rebuild Kit (15)
- Shock Absorber Extension (15)
- Traction Bar Bracket (15)
- Rack & Pinion Bushing (12)
Suspension FAQ
What should I upgrade first on my suspension?
Shocks are a common first step because they improve control and comfort without changing height. If you want more clearance or bigger tires, a lift or leveling kit is the next step.
What is the difference between a lift kit and a leveling kit?
A lift kit raises the whole vehicle, often with new springs or components, while a leveling kit usually raises just the front to match the rear. Both change geometry, so alignment is needed.
How do I know if my shocks are worn?
Signs include a bouncy or floaty ride, nose dive under braking, leaking fluid, and uneven tire wear. Shocks wear gradually, so replace them in pairs on an axle and check them regularly for leaks.
Do I need new bushings with new springs?
Often yes, particularly with leaf springs. Worn bushings cause noise and sloppy handling, and replacing them while the parts are already apart saves a good deal of labor later.










