Performance Parts
Showing 157–168 of 2132 resultsSorted by popularity
-
Exhaust System Kit
MagnaFlow MF Series Performance Cat-Back Exhaust System – 19421
- Fits 2007–2015 and 2017–2019 Nissan Titan per manufacturer fitment list
- Stainless steel cat-back system with 3 Inch tubing
- Single rear exit with tip included
- Straight-through flow design, tested against SAE J1169 standards
- Part number M/F19421
SKU: M/F19421 -
-
-
Exhaust System Kit
MagnaFlow MF Series Performance Cat-Back Exhaust System – 19203
- Part number M/F19203 from MagnaFlow Exhaust, MF Series cat-back exhaust
- Fits 2015–2018 Ford F-150 trucks in King Ranch, Lariat, Platinum, SSV, XL and XLT trims
- Confirm material, exit and tubing size before ordering
SKU: M/F19203 -
-
-
-
-
Exhaust System Kit
MagnaFlow MF Series Performance Cat-Back Exhaust System – 15844
- Stainless steel cat-back for 2004–2008 Chevrolet Colorado and GMC Canyon trucks across many trims, including Z71 and Z85
- Part number M/F15844, 2.5-inch stainless steel tubing
- Cat-back system with a single side exit
- Exhaust tip included
SKU: M/F15844 -
Exhaust System Kit
MagnaFlow MF Series Performance Cat-Back Exhaust System – 15811
- Fits the 2000–2004 Toyota Tacoma (Base, Limited, SR5) per the manufacturer fitment list, Direct Fit
- MagnaFlow MF Series cat-back exhaust, part number M/F15811
- Stainless steel construction with 2.5 Inches tubing size
- Single side exit
- Tip included
SKU: M/F15811 -
Exhaust System Kit
MagnaFlow MF Series Performance Cat-Back Exhaust System – 15699
- Fits 1996–1999 Chevrolet and GMC C/K 1500 and 2500 Suburban trucks in Base, LS, LT, SLE and SLT trims
- Part number M/F15699, 3.5-inch stainless steel tubing
- Cat-back system with a single side exit
- Exhaust tip included
SKU: M/F15699 -
What this category covers
Performance Parts is a broad grouping, and the subcategories show how wide it runs. Exhaust headers, pipes, cat-back systems and mufflers handle exhaust flow. Intake kits, air filters and throttle body spacers affect how air reaches the engine. Gauges and gauge pods monitor what the engine is doing, while spark plugs, ignition coils and plug wire parts support combustion.
Fuel system items such as replacement tanks, sending units, fuel lines and filters are here too, along with maintenance products like oil filters, serpentine belts, valve cover gaskets and additives.
Setting realistic expectations
Bolt-on parts usually deliver modest changes. A freer-flowing exhaust or intake may change sound and throttle feel more than it changes measured output, and gains depend on the engine, the tune and the rest of the system. Treat any manufacturer power claim as a figure to read in context, and be skeptical of anything that promises large gains from a single part.
For trail vehicles, low-speed torque, reliability and ground clearance often matter more than peak horsepower. A muffler that tucks up out of harm's way can be a better choice than a larger one that hangs low.
How to choose
- Match the part to the exact engine, year and model, since exhaust routing and sensor locations change between generations.
- Check whether a product is described as direct fit or requires cutting, welding or modification.
- Look at material, such as aluminized or stainless steel for exhaust parts, when corrosion resistance matters.
- Confirm emissions status. Parts that alter emissions equipment may not be legal for road use in every state, so check local regulations.
- Compare gauge face size, sender type and electrical or mechanical operation before ordering a gauge.
Installation notes
Many parts in this category are simple swaps with common hand tools, but exhaust work involves heat, rust-seized hardware and heavy components, so support the system properly and replace gaskets and clamps. Disconnect the battery before electrical or ignition work, and use the torque values from the factory service manual for spark plugs and fasteners.
Fuel system work calls for care. Relieve pressure, avoid ignition sources and consider professional installation for tanks and high-pressure lines. After changing sensors, intakes or tuning modules, watch for check engine lights and confirm everything reads normally.
Further checks and care
Confirming fitment and reading specifications
Performance parts are rarely universal. Write down the engine size, fuel type, transmission and model year, and compare them with the application list in each product description. Part numbers are the most reliable reference, since two similar-looking mufflers or modules can differ in inlet size, sensor ports or connector style. If a product mentions California or federal emissions status, read that note closely, and keep the vehicle's original parts if you may need to return to stock.
Maintenance and inspection
Performance hardware needs periodic checks. Inspect exhaust hangers, clamps and flange bolts for looseness or cracks, and look for soot trails that signal leaks. Replace air filters on the interval the maker recommends, and use the correct cleaning kit if the filter is reusable, because too much oil can contaminate airflow sensors. Watch gauge readings after any change, and investigate unusual temperatures, pressures or fuel trims promptly instead of assuming the new part is at fault.
Popular Performance Parts brands
- Crown Automotive (362)
- K&N Filter (345)
- Omix-Ada (249)
- MagnaFlow Exhaust (104)
- Afe Power (95)
- AIRAID (95)
- Flowmaster Exhaust (80)
- S&B Filters (59)
- Banks Power (51)
- Auto Meter (48)
- Borla (46)
- Lucas Oil (44)
Shop Performance Parts by type
- Exhaust Systems, Headers, Pipes and Hardware (211)
- Mufflers (86)
- Oil Filters (71)
- Electrical (128)
- Gauges (68)
- Intake Kits, Air Filter & Throttle Body Spacers (496)
- Motor Mount (50)
- Throttle Body Spacers (29)
- Speedometer Calibrators (36)
- Performance Electronics (60)
- Replacement Fuel Tanks (30)
- Fuel Hose (34)
- Replacement Fuel Tank Sending Unit (30)
- Performance Ignition Systems (40)
- Spark Plugs (14)
- Fluids, Additives and Sealants (23)
- Gas Caps and Filler Assemblies (21)
- Gauge Pillars (18)
- Fuel Line (14)
- Carburetors, Intake Manifolds, and Throttle Body (40)
- Fuel Tank Strap (16)
- Fuel Filter (14)
- Fuel and Oil Filters (23)
- Ignition Coils (11)
- Distributors (11)
- Valve Cover Gaskets (14)
- Serpentine Belt (13)
- Spark Plug Wire Divider (13)
- Speedometer Cable (13)
- Engine Gaskets (11)
Performance Parts FAQ
Will a performance part void my vehicle warranty?
It can depend on the part and how it relates to a failure. Warranty rules vary by manufacturer and region, so read your warranty documents and ask the dealer or manufacturer before modifying a vehicle that is still covered.
Are performance exhaust and intake parts street legal?
Not always. Anything affecting catalytic converters, oxygen sensors or other emissions equipment may be restricted, and rules differ by state. Check the product notes for compliance information and verify local regulations before installing.
Do I need a tune after installing these parts?
Simple filters and cat-back exhausts often need no tune. Larger changes, such as modules, throttle body or fuel system modifications, may benefit from calibration. Follow the instructions published by the part's manufacturer for your engine.











