Select your vehicle

Gauges

Gauges let you keep an eye on engine health and vehicle systems beyond the factory dash lights. This category includes speedometers, tachometers, oil pressure and temperature gauges, fuel pressure gauges, voltmeters, boost gauges and EGT pyrometers, along with replacement units for Jeeps. Auto Meter, Omix-Ada, Crown Automotive and Banks Power are the main brands. Compare types on each product page, then compare the listings below.

Banks Power Dynafact boost and pyrometer gauge assembly

A warning light tells you something already went wrong. A gauge shows the trend first, whether that is oil pressure sagging on a long climb, transmission fluid heating up in low range, or a diesel's exhaust temperature rising under tow. This section has aftermarket gauges, Jeep replacement cluster gauges and dash-mounted clinometers.

Most listings are single Auto Meter gauges sold by type and series, so you can build a matching set: oil pressure and temperature, water and transmission temperature, fuel level and pressure, voltmeter, ammeter and clock, plus programmable electric speedometers. Banks Power covers diesel boost and pyrometer setups. Omix-Ada supplies factory-style speedometers and cluster gauges for Jeeps. Smittybilt clinometers show pitch and roll angles on the trail.

68Parts listed
9Brands
12Part types
2 1/16–3 1/8"Gauge sizes listed
52 mmMost common gauge size
0–90 mphJeep replacement speedo

Shop gauges by type

Popular gauges

Gauge sizing and sender reference

Mounting sizes, where each gauge takes its reading, and the gauge lines in this section. Check each product page for the sender and fittings included.

Gauge mounting sizes

MetricTypical use
2-1/16"52 mmPressure, temperature, volts; pods and panels
2-5/8"67 mmLarger readouts, custom dash panels
3-1/8"79 mmSpeedometers and larger voltmeters

Auto Meter series in this section

  • Arctic White: white face; clock and programmable speedometer listed
  • Traditional Chrome: chrome bezel, black face
  • Sport-Comp and Sport-Comp II: white lighting
  • Pro-Comp: 2-5/8" black face
  • Phantom and Ultra-Lite: white or silver faces
  • Factory Match Dodge: styled to match the factory cluster
  • Jeep licensed: Jeep branded faces

Before you install

  • Pick a mount: A-pillar pod, dash panel, steering column or overhead
  • Check the sender thread size against your engine port
  • Plan where you will add a tee if a factory sender uses the port
  • Use a switched, fused feed so gauges turn off with the key
  • Tie the light wire to the dash dimmer for night driving
  • Match bezel and face styles if you are building a set

Where each gauge reads from

Sensor locationUnits
Oil pressureOil pressure port on the block or filter adapterpsi
Oil temperatureOil pan, filter adapter or gallery port°F
Water temperatureHead, intake or thermostat housing°F
Transmission temperaturePan or cooler line fitting°F
Fuel pressureFuel rail or line, often via an isolatorpsi
BoostIntake manifold or boost sourcepsi
Pyrometer (EGT)Thermocouple in the exhaust manifold°F
VoltmeterSwitched 12 V feedvolts
AmmeterInline in the charging circuit or a shuntamps

Clinometers listed

Smittybilt 791005Backlit; 5" W x 2.5" T x 2" deep
Smittybilt 791006 with compassNot lit; 4.75" W x 2.5" T x 1.5" deep
MountingAdhesive backing or bracket on the dash
SetupZero it with the vehicle parked on level ground

Replacement cluster gauges must match the shape and connector of the factory unit. Match the part number to your exact model and year before ordering.

All Gauges 68 parts

Showing 1–12 of 68 resultsSorted by popularity

Why add or replace gauges

Factory instrument clusters often show only a coolant temperature needle and a handful of warning lights. Aftermarket gauges report real numbers, such as oil pressure, exhaust gas temperature, boost or system voltage, which helps you catch a problem before it becomes a failure. Replacement speedometers and tachometers, including Jeep-specific electric units, restore a cluster that has failed or one that no longer reads correctly after a gear or tire change.

Common gauge types

  • Oil pressure: shows pressure in the lubrication system, and a falling reading at idle can signal wear or low oil.
  • Oil and coolant temperature: useful for towing and slow trail driving where heat builds up.
  • Fuel pressure: helps diagnose pump and filter issues on fuel-injected engines.
  • Boost and pyrometer (EGT): used on turbocharged and diesel engines to avoid overboost and excessive exhaust temperature.
  • Voltmeter and ammeter: show charging system health, handy with winches and extra lighting.
  • Speedometer and tachometer: a replacement or upgrade for the dash cluster.

Mechanical versus electric

Mechanical gauges use a line or capillary tube that carries fluid or pressure to the gauge, while electric gauges use a sending unit and wiring. Mechanical designs can be accurate and need no power for the reading, but an oil or fuel line routed into the cab is a leak and fire risk if poorly installed, so use proper fittings and secure the routing. Electric gauges avoid pressurized lines in the cabin and are the common choice for most installs. Liquid-filled gauges damp needle bounce on rough trails.

Selecting a gauge

Check the measuring range against what your engine produces, because a gauge that pegs at its limit is of little use. Confirm the bezel size (commonly 2-1/16 inch or 2-5/8 inch) and whether you need a pod or panel mount. For speedometers, match the connector and drive type, and confirm fitment for your exact year, make and model. Some systems need the speedometer recalibrated after a gear change.

Installation notes

Disconnect the battery before wiring, fuse the power feed, and use the correct adapters or sending units, such as thread sizes for oil and water ports. Route wiring away from heat and moving parts, and seal any fittings. If you are unsure, an automotive electrician can complete the job.

Placement and visibility matter more than most people expect. A gauge you cannot see at a glance on rough ground is not much help, so choose a mounting location in your normal sight line, such as an A-pillar pod, a dash-mounted cup or a replacement panel in the instrument cluster. Consider the lighting too, since many gauges have backlighting in colors designed to match factory dash lights, and a mismatch can be distracting at night. Peak-recall and warning-light features on some gauges help when the road is too rough to watch a needle.

Accuracy depends on good sensors and clean connections. Replace old or questionable sending units, check grounds, and use the thread sealant or adapters recommended for the fitting. Gauges that read erratically often have a loose ground or a failing sensor rather than a defective gauge. Compare readings against a known reference, such as a test gauge, if a reading seems wrong. Keep the manufacturer's wiring diagram, since adding gauges later is easier when the original routing is documented.

Popular Gauges brands

Gauges FAQ

Do I need a mechanical or electric gauge?

Electric gauges are easier to install and avoid pressurized lines in the cabin. Mechanical gauges are simple and accurate but need carefully routed lines. Either works when installed correctly, and your choice depends on comfort with the install.

What gauges are most useful for off-roading?

Many drivers watch coolant or transmission temperature, oil pressure and voltage, especially for slow technical driving, towing and winching. Turbo and diesel owners often add boost and EGT. Choose based on what your engine stresses.

Will new tires or gears affect my speedometer?

Yes. Taller tires and different axle ratios change the speed the vehicle actually travels per speedometer reading. Many vehicles can be recalibrated with a programmer or a speedometer gear, so check the options for your vehicle.

How do I wire a gauge safely?

Disconnect the battery, use a fused power source, and route wires away from heat and sharp edges. Use the correct sending unit and thread adapters, and seal every connection. If in doubt, ask an automotive electrician.