Overview
The Flowmaster Exhaust FlowFX Cat-Back Exhaust System, part number FLW717892, is a stainless steel cat-back for the 1986–2001 Jeep Cherokee (XJ) with the 2.5L or 4.0L engine. It fits 2 and 4 wheel drive versions, with Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE and Sport trims.
The FlowFX muffler is a straight-through performance design that attaches just behind the catalytic converter. It produces a moderate, deep and powerful sound. The mandrel-bent stainless tailpipe runs high in the undercarriage to protect it from being crushed on rocky terrain, and the mandrel-bent tubing allows free unrestricted flow.
It uses the factory tailpipe hanger locations and finishes in a 3.00-inch polished stainless steel tip embossed with the Flowmaster name. It carries the Lifetime Limited Warranty.
Key features
- Straight-through FlowFX performance muffler behind the catalytic converter
- Stainless steel construction
- Mandrel-bent tubing for unrestricted flow
- Tailpipe tucked high for rocky terrain protection
- 3.00-inch polished stainless steel tip with Flowmaster embossing
- Uses the factory tailpipe hanger locations
Installing behind the catalytic converter
Because a cat-back starts behind the catalytic converter, the job means working on the rear section of the exhaust while the front stays in place. Support the system on stable stands, let the exhaust cool, and remove the old pipe in sections. Clean the factory hanger points so the new hangers seat fully and do not place stress on the joints.
The high tailpipe routing matters on uneven ground. A higher exit reduces contact with rocks, but the pipe should still be checked for clearance to the rear axle and suspension after installation. Look at the crossmember and fuel tank straps, and make sure nothing rubs. Inspect the welds and clamps after the first few drives, and tighten any loose hangers before the next trail trip.
Specifications
| Brand | Flowmaster Exhaust |
|---|---|
| Part number | FLW717892 |
| System type | Cat-back |
| Muffler | FlowFX straight-through performance |
| Exit location | Single turndown after muffler |
| Material | Stainless steel |
| Tip | 3.00-inch polished stainless steel, included |
| Engine | 2.5L or 4.0L |
| Warranty | Lifetime Limited Warranty |
| Fitment | Direct fit |
Vehicle fitment
It fits 1986–2001 Jeep Cherokee (XJ) Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE and Sport trims, in 2 and 4 wheel drive versions, including 2-door models.
Grand Cherokee models are excluded, and Cherokee years outside 1986–2001 are not covered. Check that your year, model and trim match before ordering.
Installation notes
Flowmaster says detailed instructions are included, and the system is designed for a home installation using the factory hanger points. Because the muffler sits just behind the catalytic converter, the system replaces the rear exhaust from that point back. Let the exhaust cool, and support the vehicle on stable jack stands before working underneath.
What’s included
The kit includes the FlowFX cat-back system, the 3.00-inch polished stainless steel tip, detailed instructions and all hardware for installation.













