Overview
The Flowmaster FlowFX Cat-Back Exhaust Kit 717785 (part number FLW717785) is a 2.5 inch dual-exit stainless steel cat-back exhaust system for the 2015–2019 Ford F-150. Its fitment covers the 2015–2018 models with 2.7L/3.5L EcoBoost, 3.5L TiVCT or 5.0L engines, excluding Std Cab with Short Bed.
The dual 2.50 inch system suits a moderate to aggressive exterior and interior sound level. It uses bright finish 409S stainless steel mandrel bent tubing leading into a FlowFX straight-through performance muffler, ending in dual 4.00 inch black ceramic coated stainless steel tips with the Flowmaster logo that exit in front of the rear tire. All necessary parts, hardware and detailed instructions are included.
Key features
- Dual 2.50 inch cat-back system
- 409S stainless steel mandrel bent tubing, bright finish
- FlowFX straight-through performance muffler
- Moderate to aggressive exterior and interior sound level
- Dual 4.00 inch black ceramic coated stainless steel tips with Flowmaster logo
- Dual side exit in front of the rear tire
- Includes all necessary parts, hardware and detailed instructions
Exhaust tuning and noise
A cat-back system changes how the exhaust moves after the catalytic converter, so the sound and drone are shaped mainly by the muffler design and pipe diameter. A straight-through muffler generally produces a louder tone than a chambered one, and the tip size and exit location affect how the sound reaches the cab and the road.
Before buying, consider how often you drive with the windows down or on highways, since drone at steady cruise can be tiring even when the sound is pleasant at idle. Check that the exhaust clears the rear axle, fuel tank and frame, and re-check clamp torque after the first drives, because heat and vibration loosen fasteners over time.
- Check hangers for cracks after rough terrain
- Look for soot near joints, a sign of a leak
- Recheck heat shield clearances after installation
Specifications
| Brand | Flowmaster Exhaust |
|---|---|
| Part number | FLW717785 |
| Product type | Cat-back exhaust system kit (FlowFX) |
| Tubing size | 2.5 inches (dual 2.50 inch system) |
| Material | Stainless steel (409S) |
| System type | Cat-back |
| Exit location | Dual side |
| Tip size and finish | 4.00 inch, black ceramic coated stainless steel |
| Tip included | Yes |
| Muffler | FlowFX straight-through performance muffler |
| Fitment type | Direct fit |
Vehicle fitment
It fits 2015–2019 Ford F-150 trucks in King Ranch, Lariat, Limited, Platinum, SSV, XL and XLT trims. The 2015–2018 models with 2.7L/3.5L EcoBoost, 3.5L TiVCT or 5.0L engines are covered, excluding the Std Cab with Short Bed.
Std Cab with Short Bed trucks are excluded, and other Ford trucks are not covered. Make sure your year, model, trim and engine match before buying.
Installation notes
Follow the included instructions and tighten all fasteners to their specified torque. Support the vehicle on jack stands or a lift on level ground, never on a jack alone, and re-check fastener tightness after the first miles of driving.
Let the exhaust cool completely before working on it, and check clearances to the body, fuel lines, brake lines and wiring.
After installation, check for exhaust leaks and rattles, and re-check the clamps after the first miles of driving. Check your local regulations on exhaust sound levels.
What’s included
A cat-back exhaust system with a FlowFX muffler and dual tips, plus all necessary parts, hardware and detailed instructions.
Not included: a catalytic converter or any parts ahead of the cat-back connection.











