Overview
The Flowmaster Delta ForceCold air intake filter, part FLW615010D, is a dry, cone-style filter with an overall length of 6.625 in., an overall width of 7.5 in., and an overall height of 6.625 in. It is white. It is a universal fit, sized by its dimensions rather than built for one vehicle.
Key features
- Dry filter design
- Cone style
- Overall dimensions of 6.625 in. long, 7.5 in. wide and 6.625 in. high
- Inside diameter 6 in. and outside diameter 7.5 in.
- Part of the Delta ForceCold line
Keeping a dry filter clean
An intake filter sits between the outside air and the engine, so its job is to catch dust, grit and debris before they reach the intake. A dry cone-style filter depends on its media staying open and its seal staying tight. When the filter loads with dirt, airflow drops and the engine can run leaner than intended, so the element needs regular attention, especially after off-road driving in dusty conditions.
The intake tube and clamps matter as much as the filter itself. A cracked tube or a loose clamp lets unfiltered air bypass the element, which can wear the engine faster than a dirty filter would. Inspect the connection each time the filter is serviced, and replace any clamp that no longer holds the filter snugly.
- Look for torn media or a bent cone edge
- Check the seal where the filter meets the intake tube
- Keep the air box free of loose dirt during service
Specifications
| Brand | Flowmaster Exhaust |
|---|---|
| Part number | FLW615010D |
| Product line | Delta ForceCold |
| Filter type | Dry |
| Style | Cone |
| Overall length | 6.625 in. |
| Overall width | 7.5 in. |
| Overall height | 6.625 in. |
| ID | 6 in. |
| OD | 7.5 in. |
| Color | White |
Vehicle fitment
No specific year, make or model is named for this filter. Compare the 6 in. ID and 7.5 in. OD with your intake tube before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the intake tube against the 6 in. ID and 7.5 in. OD before fitting the filter.
What’s included
The filter is the only item included. Clamps and adapters are not part of this package, so check the package contents against your installation before starting.









