Overview
The Flowmaster American Thunder Cat-back exhaust system, part number FLW817933, is a bolt-on, emissions-legal cat-back for the 2020 Chevrolet Silverado and GMC Sierra 2500HD and 3500HD trucks with the 6.6L gas engine. It fits 2020–2021 Silverado 2500 HD, 2020 Silverado 3500 HD, 2020–2021 Sierra 2500 HD and 2020 Sierra 3500 HD trucks.
The system uses a stainless steel 50 Series HD muffler and dual 3.00-inch 409 stainless steel mandrel-bent tailpipes. The tailpipes can exit straight out the back or dual out the sides behind the rear wheels, and the side exit is best suited for towing applications. The sound is moderate to aggressive, both inside and outside the truck.
Key features
- 50 Series HD stainless steel muffler
- Dual 3.00-inch 409 stainless steel mandrel-bent tailpipes
- Straight out back or dual side exit behind the rear wheels
- Dual 4.00-inch polished 304 stainless steel tips
- Moderate to aggressive sound level
- Lifetime Limited Warranty
Towing and tailpipe exit
On a heavy-duty truck, the tailpipe exit choice affects how exhaust moves around the bed and trailer. A straight-out-back layout keeps the tips at the rear of the truck, while a side exit moves them behind the rear wheels. Decide on the layout before the final fit, because the tailpipe angle and clearance change between the two.
The system sits low behind the cab and near the bed, so heat shields and nearby wiring deserve a look during installation. Heavy trucks also put extra load on hangers and clamps, especially when pulling a trailer. Recheck the fasteners after the first tow trip and again after rough roads.
- Confirm tailpipe clearance behind the rear wheels before final tightening
- Check heat shields and nearby wiring after installation
- Recheck hangers and clamps after the first tow
- Use stable stands and a helper when handling parts
Specifications
| Brand | Flowmaster Exhaust |
|---|---|
| Part number | FLW817933 |
| System type | Cat-back |
| Muffler | 50 Series HD, stainless steel |
| Tailpipes | Dual 3.00-inch 409 stainless steel, mandrel-bent |
| Tips | Dual 4.00-inch polished 304 stainless steel |
| Exit | Straight out back or dual out sides |
| Sound level | Moderate to aggressive |
| Emissions | Emissions-legal |
| Required configuration | Crew Cab, 6.5 ft (standard) bed, 153.7-inch wheelbase |
| Fitment | Direct fit |
Vehicle fitment
Flowmaster lists 2020–2021 Chevrolet Silverado 2500 HD (Custom, High Country, LT, LTZ, WT), 2020 Chevrolet Silverado 3500 HD (High Country, LT, LTZ, WT), 2020–2021 GMC Sierra 2500 HD (AT4, Base, Denali, SLE, SLT) and 2020 GMC Sierra 3500 HD (AT4, Base, Denali, SLE, SLT).
It fits Crew Cab models with a 6.5 ft bed and 153.7-inch wheelbase only. Standard cab and other bed lengths fall outside this fit, and half-ton trucks are not covered. Check the year, model and trim against your truck before ordering.
Installation notes
The system is bolt-on, and the tailpipe exit is a choice between straight out back and dual side exits. Decide on that layout before the final fit, since the side exit is the option Flowmaster links to towing. Work under a heavy-duty truck only on stable stands, and use a helper when lifting parts.
What’s included
The kit includes all necessary parts and hardware for installation, plus the dual 4.00-inch polished 304 stainless steel tips.















