Overview
The Flowmaster American Thunder Cat-Back Exhaust System, part number FLW817664, is a bolt-on cat-back with dual side and dual rear exits for 2010–2014 and 2016–2021 Toyota Tundra pickups with the 5.7L or 4.6L V8 engines. Trims covered are Base, Limited, Nightshade, SR and SR5.
The sound is aggressive, and the system delivers strong performance from its mufflers. It uses dual 2.50 in. 409S stainless steel tailpipes that finish in 3.50 in. polished stainless steel tips. It fits regular cab long bed, double cab short bed and CrewMax models and is made in the USA.
Key features
- Dual out rear and dual out side exit (DOR/DOS)
- Dual 2.50 in. 409S stainless steel tailpipes
- 3.50 in. polished stainless steel tips, included
- Aggressive sound level
- Bolt-on design with all necessary parts and hardware
- Made in the USA, covered by the Lifetime Limited Warranty
Tailpipe layout and sound
The dual side and dual rear exit layout sets where the exhaust exits, so the tailpipe position affects both sound and clearance. Side exits sit near the rear wheel, while rear exits point toward the bumper. Before fitting, confirm the tip position clears the body, spare tire and any bumper trim, and check that the tips line up evenly.
Bolt-on cat-backs rely on stock hangers and clamps, which wear over time. Inspect the rubber hangers every few months and after rough off-road use, looking for cracking, sagging or stretched sections. Replace worn hangers before they allow pipes to rub against the frame or bed. Dual 2.50 in. tailpipes benefit from careful alignment so the joints do not carry strain. Recheck clamp tightness after the first week of driving, since heat cycles can loosen fasteners.
Specifications
| Brand | Flowmaster Exhaust |
|---|---|
| Part number | FLW817664 |
| System type | Cat-back |
| Exit | Dual side and dual rear (DOR/DOS) |
| Material | Stainless steel, 409S tailpipes |
| Tubing size | 2.5 inches |
| Tips | 3.50 in. polished stainless steel, included |
| Sound level | Aggressive |
| Warranty | Lifetime Limited Warranty |
| Fitment | Direct fit |
Vehicle fitment
It is designed for 2010–2014 and 2016–2021 Toyota Tundra models in the Base, Limited, Nightshade, SR and SR5 trims, with regular cab long bed, double cab short bed and CrewMax bodies and the 5.7L or 4.6L V8.
Model years outside the two listed ranges are not covered, and other Toyota pickups such as the Tacoma are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The system is bolt-on, and Flowmaster says all necessary parts and hardware are supplied for installation. Choose the tailpipe layout before fitting, since rear and side exits are different configurations. Work under a raised truck only on level ground with stable stands, and wear eye protection.
What’s included
The system includes the dual 2.50 in. tailpipes, the dual 3.50 in. polished stainless steel tips, and all necessary parts and hardware for installation.









