Overview
The Flowmaster FLW717918 is a FlowFX cat-back exhaust system for 2016 to 2021 Toyota Tacoma trucks, with 2.5-inch tubing, a dual-side exit and black ceramic coated 304S stainless steel tips. It fits the Limited, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport and Trail trims. The 3.5L engine applies to 2016–2019 trucks, so check your engine as well as your year and trim.
Cat-back means the system replaces the exhaust from the catalytic converter rearward and leaves the front pipe and converter in place. This kit is built from 409 stainless steel throughout. A 2.50-inch inlet pipe feeds a single inlet/dual outlet FlowFX straight-through muffler, which Flowmaster says delivers a deep sound with maximum performance. Two 2.50-inch mandrel-bent tailpipes exit on each side at an angle behind the rear wheels, directing exhaust away from a boat or travel trailer while towing.
Key features
- 409 stainless steel tubing throughout the system
- 2.50-inch inlet pipe into a single inlet/dual outlet FlowFX straight-through muffler
- Dual 2.50-inch mandrel-bent tailpipes that exit on each side behind the rear wheels
- Uses the factory hanger locations, plus an extra hanger for the new left tailpipe
- Large 4.50-inch black ceramic coated 304S stainless steel tips
- It fits 2 and 4 wheel drive models and all wheelbases.
Tailpipe clearance and hangers
A dual-side exit puts both tailpipes behind the rear wheels, where they are close to the tires, fuel system components and any trailer hitch. Before final tightening, sit the tailpipes so they clear the tires through full suspension travel, and confirm that the angle directs exhaust away from the rear of the bed.
The extra left side hanger is there to control the new tailpipe’s weight and movement. Heat from the tailpipes can reach nearby panels, so keep the tips clear of plastic trim. After the first few drives, look for rubbing marks on the tailpipes and recheck the clamps.
- Check tire clearance through full suspension travel
- Confirm the left side hanger is fitted and tight
- Keep tips clear of plastic trim and hitch parts
- Recheck clamps after the first few drives
Specifications
| Brand | Flowmaster Exhaust |
|---|---|
| Part number | FLW717918 |
| System type | Cat-back exhaust system |
| Tubing size | 2.5 inches |
| Exit location | Dual side |
| Material | Stainless steel, 409 throughout |
| Muffler | FlowFX straight-through, single inlet/dual outlet |
| Tailpipes | Dual 2.50-inch mandrel-bent |
| Tips | Pair of 4.50-inch diameter black ceramic coated 304S stainless steel, included |
| Fitment type | Direct fit |
Vehicle fitment
It fits 2016–2021 Toyota Tacoma trucks in the Limited, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport and Trail trims. The 3.5L engine applies to 2016–2019 trucks, and the kit fits 2 and 4 wheel drive models with all wheelbases.
Tacoma models outside the 2016–2021 range, including earlier generations, are not covered by this kit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit uses the factory hanger locations and adds one extra hanger to support the new left side tailpipe. The install can be done at home, and the included instructions walk through the routing.
What’s included
The system includes the FlowFX muffler, both dual tailpipes, the pair of 4.50-inch black ceramic coated tips, the extra left side hanger, installation instructions and all necessary hardware.














