Overview
The Flowmaster Delta Force Performance Air Intake, part number 615183D, is a cold air intake with a dry synthetic filter for the 2018-2026 Jeep Wrangler JL with the 3.6L engine. It fits two-door Rubicon, Sport and Sport S trims and four-door Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited Sport S trims. The system is a complete kit with a custom molded intake tube, an enclosed dry filter and a mounting air dam, made in the USA.
The system is not currently legal for use in California. Pairing it with a Flowmaster exhaust suits the intended tone. The filter can be shaken or lightly blown out with air, or covered by a pre-filter to extend its life.
Key features
- Custom molded black cross-linked polyethylene (XLPE) high-flow intake tube
- Black anodized aluminum fittings where applicable
- High quality reinforced silicone couplers and all stainless steel hardware
- Large diameter, high-flow conical dry synthetic air filter element
- Custom-fit black powder-coated air dam with attachment brackets
- Soft bumpers to avoid metal to metal contact under the hood
Heat, water and filter care
Dry synthetic filters trade some cleaning convenience for a sealed housing that keeps dirt out of the airbox. Full enclosure helps limit water entry during deep puddle crossings, but a damp filter should be dried fully before reinstalling.
Heat soak matters on the JL, since the engine bay runs hot in summer and the intake tube can soften near nearby hardware. Check the tube for cracks after heavy trail use and make sure the air dam is not rubbing the bumper. Silicone couplers age, so inspect them every year. A simple visual check at each oil change catches loose clamps and worn soft bumpers before they cause noise.
- Look for cracks in the intake tube
- Tighten coupler clamps after the first few drives
- Keep the air dam clear of mud
Specifications
| Brand | Flowmaster Exhaust |
|---|---|
| Part number | 615183D |
| Intake system type | Cold air |
| Filter type | Dry synthetic |
| Filter housing | Full enclosure |
| Inlet tube | Included, XLPE |
| Couplers | Reinforced silicone |
| Hardware | All stainless steel |
| Engine | 3.6L |
| Manufacturing | USA |
Vehicle fitment
It fits 2018-2026 Jeep Wrangler JL models: two-door Rubicon, Sport and Sport S, and four-door Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited Sport S.
Two-door Sahara and Wrangler JK models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The air dam mounts the system with attachment brackets, and soft bumpers prevent metal-to-metal contact under the hood. Work with the engine off and cool, and keep the filter covered or clean.
What’s included
The kit includes the XLPE intake tube, black anodized aluminum fittings where applicable, reinforced silicone couplers, stainless steel hardware, dry synthetic filter, custom-fit air dam with brackets and soft bumpers. Not included: Confirm whether a pre-filter is included before ordering.











