Side marker and parking light assemblies are the small lamps at the corners of the fenders and bumper that show your width and signal turns. This branch of Lighting & Lighting Accessories lists housings, lenses and complete assemblies in amber, clear and smoke, mostly for Jeep models. Crown Automotive, Omix-Ada, RT Off-Road and Recon are among the brands. Open a product page for side and bulb details, then compare the products below.
Side Marker Light Assembly
Showing 1–12 of 77 resultsSorted by popularity
-
Side Marker Light Assembly
Oracle Lighting LED Front Sidemarker Lights (Smoke) – 5853-504
- Oracle Lighting ORC5853-504 LED front sidemarker lights with a smoke lens and amber LEDs
- Sold as a pair, direct-fit into the factory sidemarker housing
- Plug-and-play connection to the factory socket
- Fits 2018–2026 Jeep Wrangler JL and 2020–2021 Jeep Gladiator JT
SKU: ORC5853-504 -
Side Marker Light Assembly
Oracle Lighting 7443 18 LED 3-Chip SMD Light Bulb (Cool White) – 5011-001
Side Marker Light AssemblyOracle Lighting 7443 18 LED 3-Chip SMD Light Bulb (Cool White) – 5011-001
- Oracle Lighting 7443 light bulb with 18 LED, 3-chip SMD design, cool white
- Lumen count of 270-306lm
- Universal fit, chosen by the 7443 bulb type
- 5050 SMD chips rated 100,000 hours for continuous use
- Turn signal use needs a load equalizer to prevent rapid-flash
SKU: ORC5011-001 -
Side Marker Light Assembly
Oracle Lighting 7440 18 LED 3-Chip SMD Turn Signal Bulb (Cool White) – 5109-001
Side Marker Light AssemblyOracle Lighting 7440 18 LED 3-Chip SMD Turn Signal Bulb (Cool White) – 5109-001
- Oracle Lighting 7440 turn signal bulb with 18 LED, 3-chip SMD construction, cool white
- Universal fit, so the 7440 bulb type matters rather than the vehicle
- 5050 SMD chips rated 100,000 hours for continuous use
- Draws 1/10th of the power of the factory bulb
- Turn signal use needs a load equalizer to prevent rapid-flash
SKU: ORC5109-001 -
Side Marker Light Assembly
Oracle Lighting 3157 18 LED 3-Chip SMD Turn Signal Bulb (Red) – 5103-003
- Oracle Lighting 3157 18 LED 3-chip SMD turn signal bulb, red, part number ORC5103-003
- Universal fit, so it is not tied to a specific vehicle
- 5050 SMD chips rated at 100,000 hours
- 1 year warranty
SKU: ORC5103-003 -
-
Side Marker Light Assembly
Anzo Parking Light Assembly – 511066
- Anzo parking light assembly, part number 511066
- Direct fit for 2003–2007 Chevrolet Avalanche and Silverado trucks
- Includes 1500, 1500 HD, 2500, 2500 HD and 3500 models with trims shown per model
- Lens, housing color and bulb type not stated
SKU: ANZ511066 -
-
Side Marker Light Assembly
Warrior Tube Flare LED Light Kit (Amber) – 2731
- Warrior 2731 amber LED side marker light kit, 2.5 in
- Includes two side marker lights, two mounting grommets and two wiring pigtails
- Universal Fit, no specific vehicle confirmed
- LEDs made in the USA, with a lifetime warranty stated by Warrior
SKU: W/I2731 -
Side Marker Light Assembly
Recon 62 Inch Big Rig Side Mounted LED Running Lights – 26414
- Recon 26414 62 inch Big Rig side mounted LED running light kit in amber
- Two amber colored LED bars mount beneath the door sill along the rocker panel
- Running and parking lights intensify six times when the turn signals are applied
- All necessary mounting hardware included; simple hand tools required
- General-fit kit for trucks and SUVs, with no single vehicle it is made for
SKU: REC26414 -
Side Marker Light Assembly
Recon LED Front Turn Grill Signal Lens (Clear) – 264134CL
- Fits the 07-09 Jeep Wrangler (2007–2009), replacing the factory amber front lens
- Clear lens with super-bright amber LEDs for running/parking light and turn signal
- Two LED lenses per kit, one for each side
- Recon part number 264134CL, UPC 810614011381
SKU: REC264134CL -
What these lamps do
A side marker light makes the vehicle visible from the side and corners at night. A parking or turn signal lamp at the front combines a steady running function with a flashing signal. This category includes the whole lamp assembly, lens-and-housing sets, replacement lenses and kits for a driver and passenger side. Many items are direct replacements for aging factory lamps that have cracked, yellowed or filled with moisture.
How to choose
First identify the position: front fender, bumper corner, grille or rear quarter. Then note driver or passenger side, because many lamps are side-specific. Decide on lens color. Amber lenses are the traditional front choice, clear lenses with amber bulbs are common on Jeeps, and smoke lenses give a blacked-out look but may reduce light output.
- Complete assembly: Housing, lens and socket in one piece, easiest if the old unit is damaged.
- Lens only: Cheaper for simple cracks if the housing is sound.
- Kit with both sides: Keeps appearance matched left to right.
Specs and details to compare
Read the listing for whether bulbs are included, since some assemblies are sold without them. Check the bulb type and whether the lamp is described as DOT compliant, which matters for street use. Note the finish and whether the part is an exact OE replacement or a styled alternative. For turn signal lamps, pay attention to the number of filament wires and socket style so the connector will plug in without splicing.
Installation and compatibility
Most of these lamps unplug from a factory harness and are held with clips or a couple of screws. Disconnect the battery if you are working near wiring, and use dielectric grease on bulb sockets to resist corrosion. Replace bulbs in pairs, and make sure the new lamp seals against the body so water stays out.
Lighting rules vary by state, and lens color, brightness and placement requirements differ, so check local regulations before changing a lamp's appearance. Confirm fitment for your exact year, make, model and trim level, since lamp shapes changed between generations. If you switch to LED bulbs, a turn signal may flash fast unless the load is matched, so follow the bulb maker's instructions.
Diagnosing problems and common mistakes
When a marker or parking lamp stops working, check the bulb first, then the socket for corrosion, then the connector and ground. A lamp that works only when tapped usually has a loose socket or corroded contact. Water inside a lens suggests a failed seal, and replacing the lens or assembly is usually the fix. Yellowed or hazy lenses reduce visibility, so replacing them restores brightness.
A frequent mistake is ordering the wrong side, since driver and passenger parts can look similar. Another is ordering a lens when the housing is cracked, leaving the leak path in place. Mixing amber and clear lenses between sides makes the vehicle look mismatched and can confuse other drivers about signal color.
Keep a few spare bulbs of the correct type. Use gentle cleaner on plastic lenses and avoid solvents that craze them. If you add aftermarket guards or bumpers-bumpers-tire-carriers-winch-mounts-2, check that they do not block or cover the lamps.
Popular Side Marker Light Assembly brands
- Crown Automotive (29)
- Omix-Ada (24)
- RT Off-Road (11)
- Recon (4)
- Jeep (4)
- JW Speaker (4)
- Oracle Lighting (4)
- Poison Spyder Customs (3)
- Hella (3)
- Dorman (2)
- Anzo (2)
- Smittybilt (1)
Side Marker Light Assembly FAQ
Are side marker lights required?
Requirements depend on the vehicle and local rules. Most vehicles come with them from the factory, and removing equipment can cause an inspection or legal problem. Check your state's regulations before deleting or changing marker lamps.
Do these assemblies come with bulbs?
It varies by product. Some listings state that the bulb is not included, while others supply amber bulbs with the kit. Read the product description carefully and note the bulb type before ordering your replacement parts.
What is the difference between a parking lamp and a side marker?
A parking lamp at the front glows steadily and often doubles as a turn signal. A side marker shows the vehicle's width and length from the side and generally has no signal function.
Why is my replacement turn signal flashing fast?
A fast flash usually means a burned-out bulb, a poor ground, or a low-load LED bulb that needs a resistor or LED-ready flasher. Check bulbs and connections, then follow the bulb manufacturer's guidance.









