Overview
The Oracle Lighting 7443 18 LED 3-Chip SMD Light Bulb in cool white, part number ORC5011-001, is a 7443 replacement bulb built around 18 LEDs. It delivers 270-306lm and is designed for turn signal use, with brake, reverse and running light use also covered.
The bulb uses 5050 SMD chips with a sharp, vibrant hue. The chips are rated at 100,000 hours for continuous use and draw 1/10th of the power of the factory bulb. It has a quick-fire response and is brighter than stock halogen bulbs. Choose it by the 7443 bulb type, since the socket decides whether it matches.
Key features
- Lumen count of 270-306lm
- 18 LED, 3-chip SMD construction
- 5050 SMD technology with sharp, vibrant hues
- Quick-Fire response.
- Rated 100,000 hours for continuous use
- Load equalizer needed for turn signal use only
Choosing the right white
Cool white light sits at the bluish end of the range, which many drivers pick for a crisp look at night. Color is a matter of taste, but the bulb type and socket are not. A 7443 socket takes a 7443 bulb, and a mismatch can cause poor seating or no light at all.
Brightness and beam appearance also depend on the lens and reflector, so an LED bulb in a halogen housing may not look like a purpose-built lamp. Check the lens condition first, since a cloudy or yellowed lens can reduce visible light more than a bulb change. Clean the lens before judging the new bulb, and replace aged bulbs in pairs so both sides match.
- Match the socket type before buying
- Clean the lens before judging brightness
- Compare color across both sides
- Replace aged bulbs in pairs
Specifications
| Brand | Oracle Lighting |
|---|---|
| Part number | ORC5011-001 |
| Bulb type | 7443 |
| LED configuration | 18 LED, 3-chip SMD |
| Light color | Cool white |
| Chip technology | 5050 SMD |
| Lumen count | 270-306lm |
| Rated life | 100,000 hours of continuous use |
| Power draw | 1/10th of the factory bulb |
| Warranty | 1 year |
Vehicle fitment
This is a universal-fit bulb, so it is not tied to a vehicle year, make or model. Pick it by the 7443 bulb type your existing light uses, and check that type in your owner’s manual or on the bulb being replaced before installing.
Installation notes
When the bulb is used for turn signals, a load equalizer is needed to prevent rapid-flash, because SMD bulbs draw much less power than the factory bulb. Oracle says brake, reverse and running light use does not require an equalizer. SMD bulbs also illuminate faster than incandescent bulbs, which Oracle notes adds safety in tail lights.
What’s included
This is the 7443 LED bulb described above, so match the bulb type before ordering.
Not included: A load equalizer, which turn signal use may require.









