Overview
The Oracle Lighting 3157 18 LED 3-chip SMD turn signal bulb, part number ORC5103-003, is a red LED replacement bulb for turn signal use. It is a universal-fit bulb, so it is not tied to a specific vehicle.
The bulb is a direct OEM replacement built on a 5050 SMD design. It is brighter than stock halogen bulbs, has a quick-fire response, and draws 1/10th of the power of the factory bulb. The bulb carries a 1 year warranty.
Key features
- 5050 SMD chips rated at 100,000 hours for continuous use
- Quick-fire response
- Brighter than stock halogen bulbs
- Uses 1/10th of the power of the factory bulb
- Red 18 LED, 3-chip SMD design
Turn signal flash rate
An LED turn signal bulb draws far less current than a halogen bulb, so the flasher may run quickly or the indicator may blink too fast. A load equalizer adds the electrical load the flasher expects. Turn signal use is the setting where this matters, while brake, reverse and running lights usually work without one.
Before installing, check that the bulb type matches your socket and that the bulb on the other side uses the same type. Mixing bulb types or brightness can make the flash rate uneven. Replacing both sides at the same time keeps the pattern consistent. If a fast rate persists with the equalizer fitted, inspect the wiring for loose connectors and corroded terminals before replacing the flasher.
- Confirm the bulb type matches the socket
- Replace front or rear pairs together
- Test every light function after installing
- Check the flasher type if the rate stays fast
Specifications
| Brand | Oracle Lighting |
|---|---|
| Part number | ORC5103-003 |
| Bulb type | 3157 turn signal |
| LED count | 18 LED |
| Chip design | 3-chip SMD, 5050 |
| Color | Red |
| Power use | 1/10th of the factory bulb |
| Chip rating | 100,000 hours continuous use |
| Warranty | 1 year |
| Fitment type | Universal Fit |
Vehicle fitment
This bulb is universal fit, so it is not tied to specific vehicle years, models or trims. The application is turn signal use for the 3157 bulb type.
Installation notes
Turn signal SMD bulbs need a load equalizer to prevent rapid flashing. The bulb does not need one when used in brake, reverse or running lights. Confirm the bulb type matches your socket before installing.
What’s included
Confirm the number of bulbs in the package before ordering. Turn signal use requires a load equalizer, so have one on hand.









