Overview
The Omix-Ada 12401.04 is a red side lamp that comes with wiring and a bulb, for 1976–1983 Jeep CJ5, 1976–1986 CJ7 and 1981–1985 Jeep Scrambler models. Confirm the mounting position before ordering.
Drilling is required on models without a factory rear marker, so plan the mounting before starting.
Key features
- Red lens color
- Wiring and bulb included
- Direct OE replacement built to original specifications
- Drilling required on models without a factory rear marker
- Part number 12401.04 and UPC 804314153717
Mounting and wiring considerations
Red side lamps are often mounted where access is tight, so plan the bracket position and the wiring route before drilling anything. Pick a spot that keeps the lens clear of the body and gives a clean path to a fused circuit. Mark the holes carefully and check behind the panel for fuel lines, brake lines and existing harness runs.
Wiring is the part that most often causes problems on this type of lamp. Use weatherproof connectors, keep the wire away from hot exhaust components and secure the loom with clips so it cannot rub on the frame. Road-use rules for red rear lamps vary by region, so check the rules that apply to your vehicle before driving with the lamp fitted.
- Deburr drilled holes and seal bare metal to limit rust.
- Test the lamp and bulb before final mounting.
- Keep spare fuses of the correct rating in the vehicle.
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 12401.04 |
| UPC | 804314153717 |
| Color | Red |
| Position | Front or rear: confirm before ordering |
| Type | Lens |
| Included | Wiring and bulb |
| Installation | Drilling required on models without a factory rear marker |
| Warranty | Limited five year manufacturer warranty |
| Fitment type | Direct fit |
Vehicle fitment
It fits 1976–1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited, Renegade), 1976–1986 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Limited, Renegade) and 1981–1985 Jeep Scrambler (Base, Laredo, Renegade, SL, SR). Confirm your vehicle’s year, model and trim before ordering.
CJ6 and Wrangler YJ models are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Drilling is required on models without a factory rear marker, so check whether your vehicle has one before mounting. Wire the lamp through a fused circuit and check local road-use rules for red rear lamps before driving.
What’s included
Wiring and a bulb are included with the red side lamp.
Not included: Check that you have suitable mounting hardware before starting the installation.














