Lighting & Lighting Accessories
Showing 61–72 of 2467 resultsSorted by popularity
-
Bumper Lighting Mounts
Rugged Ridge Rear LED Cube Mount (Passenger Side) – 11232.76
- Fits 2018–2026 Jeep Wrangler JL, 2-door and 4-door models, per the manufacturer list
- Passenger side rear LED cube mount, part RUG11232.76
- 2-piece bracket mounts from behind the bumper
- Designed to work with most popular aftermarket bumpers
- LED light not included
SKU: RUG11232.76 -
Lighting Accessories
Rugged Ridge Euro Guard Kit, 8-Piece Set – 12496.32
- 8-piece black metal euro guard kit, part RUG12496.32
- Fits 2007–2018 Jeep Wrangler JK, 2-door and Unlimited models
- Guards for headlight, parking, side marker, factory fog and tail lights
- Installs to factory mounting points
SKU: RUG12496.32 -
Lighting Accessories
Rugged Ridge Elite Euro Headlight Guard Kit (Black) – 11230.21
- Fits 2018–2026 Jeep Wrangler (JL) and 2020–2026 Jeep Gladiator (JT), per the manufacturer list
- Cast aluminum with satin black powder coat finish
- Elite Euro geometric design
- No-drill installation; part number RUG11230.21
SKU: RUG11230.21 -
A-Pillar Lighting Mounts
Rugged Ridge Dual A-Pillar 3.5-Inch Square LED Kit (Black) – 11232.38
- Dual A-pillar LED light kit, part RUG11232.38, black finish
- Includes an A-pillar bracket set and four 3-inch square LED driving lights
- Fits the 2004-2006 Jeep Wrangler (LJ) and 1997-2006 Jeep Wrangler (TJ)
- Mounts to existing factory holes with no drilling or cutting
SKU: RUG11232.38 -
Hinge and Cowl Lighting Mounts
Rugged Ridge Cowl Light Bar Bracket – 11232.71
- Mounts directly to the hood hinge points on the cowl
- Manufacturer list covers 2018–2026 Jeep Wrangler JL and 2020–2026 Jeep Gladiator JT
- Sturdy steel with satin black powder coat
- Mounting hardware and instructions included; light bar not included
SKU: RUG11232.71 -
-
-
Roof and Windshield Lighting Mounts
Rough Country Upper Windshield Light Bar Mounts – 70504
- Listed fitment: 2007–2018 Jeep Wrangler JK, two-door and Unlimited four-door
- Holds a 50-inch Straight LED light bar at the upper windshield
- Light bars measuring 50-5/16 inches mount to mount
- Steel with a durable black powder coat
- Brackets only; light bar not included
SKU: R/C70504
What this category covers
Lighting for a 4x4 falls into two broad groups. The first is auxiliary lighting added to the vehicle: light bars, pod lights, fog and driving lamps, work lamps and rock lights. The second is replacement and repair lighting: headlights, tail and brake lights, side markers, bulbs, bezels and sockets that restore factory function. The subcategories here separate these so you can go straight to the type you need.
Choosing auxiliary lights
Start with what the light needs to do. Driving lights throw a longer, narrower beam for high-speed visibility on dirt roads. Fog lights spread low and wide to cut under dust and mist. Flood or work lamps light the area around the vehicle for camp and recovery tasks. Light bars combine these roles depending on optics, and many offer combination or hybrid beam patterns.
- Beam pattern: spot for distance, flood for width, combo for general use.
- Housing and sealing: look for an ingress protection rating suited to water crossings and pressure washing.
- Lens material: polycarbonate resists rock strikes better than glass but can scratch.
- Power draw: confirm the lamp's amperage against your wiring and alternator capacity.
Replacement lamps and bulbs
For factory-style repair, match the lamp to the exact year, make, model and side of the vehicle. Bulb type matters: halogen, HID and LED units are not always interchangeable in the same housing, and a poorly matched LED can scatter light and blind oncoming drivers. Check the bulb designation on the old unit or in the owner's manual before ordering.
Wiring and installation
Auxiliary lights should be wired through a relay with a correctly rated fuse, not straight from a switch. Use wire gauge appropriate for the current and length of run, seal connectors against moisture, and mount lights solidly so vibration does not loosen them. Accessory brackets and cradles are sold separately for many light bars, so confirm what is included in a given kit.
Legal and compatibility notes
Rules on auxiliary lighting vary by state. Many jurisdictions restrict forward-facing lights on public roads, require covers when not off-road, or limit color. Check your local regulations. Confirm fitment for your exact vehicle and review the manufacturer's specifications before installing.
A few habits make lighting upgrades last. Keep a short list of the bulb types and lamp part numbers on your vehicle, because side markers, headlights and tail lights often differ between model years and trims. When mounting auxiliary lights, aim them after installation on level ground at a wall or garage door, so the beam lands where you intend rather than into the eyes of other drivers. Inspect wiring for chafing after rough trips, and dab dielectric grease on connectors to resist corrosion. Replacement lenses and covers are sold for many popular lamps, so a cracked lens does not always mean a new light. Finally, think about total electrical load: several high-output lamps running at once can strain a stock alternator, particularly with a winch or fridge on the same system. Keep spare fuses and a small supply of weatherproof connectors in the vehicle, since a blown fuse is the most common reason a light stops working on the trail.
Popular Lighting & Lighting Accessories brands
- Rigid Industries (755)
- Hella (204)
- KC HiLites (189)
- Rugged Ridge (146)
- Spyder Auto Group (122)
- Oracle Lighting (108)
- Recon (101)
- Crown Automotive (100)
- Piaa Lighting (99)
- Omix-Ada (88)
- Baja Designs (83)
- JW Speaker (74)
Shop Lighting & Lighting Accessories by type
- Fog & Driving Lights (328)
- Offroad Racing (328)
- Offroad Racing Fog & Driving Lights (537)
- Lens Covers and Shields (251)
- Light Mounting Brackets & Cradles (290)
- Headlights Housings and Conversions (198)
- Replacement Headlights, Tail Lights & Bulbs (227)
- Replacement Bulbs (141)
- Tail & Brake Lights (129)
- Headlights (97)
- Side Marker Light Assembly (77)
- LED Replacement Bulbs (85)
- Light Bar Mounting Kit (64)
- Lighting Accessories (64)
- Headlight & Tail Light Bezel Sets (51)
- Fog/Driving Light Wiring Kit (35)
- Third Brake Lights (34)
- Auxiliary Lighting (32)
- Work Lamp (20)
- Roof Marker Light (20)
- Multi-Use Accent Lights (18)
- Headlight Switch (16)
- Work Lamps (11)
- License Plate Lighting (8)
- Side Marker Light Socket (8)
- Third Brake Light Bracket (8)
- Fog/Driving/Offroad Light Lens (7)
- Reverse / Backup Lights (5)
- LED Resistor (6)
- Off Road Light Bezel Sets (6)
Lighting & Lighting Accessories FAQ
What is the difference between driving lights and fog lights?
Driving lights produce a longer, tighter beam to extend your reach at speed. Fog lights produce a wide, flat beam mounted low to reduce glare off dust, rain or snow. They solve different problems, and many vehicles carry both.
Do I need a relay to install a light bar?
Yes, in most cases. A relay lets a small switch control a high-current circuit, and an inline fuse near the battery protects the wiring. Follow the lamp maker's wiring diagram and use wire sized for the current draw.
Can I replace halogen bulbs with LED bulbs?
Sometimes, but the housing was designed around a halogen filament. LED retrofit bulbs can produce poor beam patterns or glare in reflector housings. Check that the product is intended for your vehicle and review local lighting regulations.
Are off-road lights legal to use on the street?
Rules vary by state and usually restrict how auxiliary lights may be mounted, wired and used on public roads. Many require covers or separate switching. Check your local regulations before driving with them on.











