Overview
The Rugged Ridge 50-inch LED Light Bar, part number RUG15209.06, is a 50-inch LED light bar that mounts on a bracket and lights the trail ahead on Jeeps and other off-road vehicles. It uses 96 long-life OSRAM LEDs rated at 17K lumens and 144 watts, arranged for a combination beam: a 90-degree flood spreads light close to the vehicle and to the sides, while an 8-degree spot reaches farther down the trail.
LED lighting gives more light output and more efficient operation than halogen or HID lamps, and this bar is designed to deliver that on rough trails. The housing is black powder-coated die-cast aluminum with weather-tight connectors. It is vibration- and corrosion-resistant and IP67 waterproof. The Fast Track Mounting System (11232.52) can be paired with the bar for a complete lighting package on a Wrangler JK.
Key features
- 50-inch housing with a combination flood and spot beam
- 96 OSRAM LEDs rated at 17K lumens and 144 watts
- Die-cast aluminum housing with a black powder-coat finish
- Weather-tight connectors and an IP67 waterproof rating
- Vibration- and corrosion-resistant construction, per the maker
- Clear lens
Relays and trail use
A bar that draws this much power is best run through a relay, so the dash switch only handles a small control current. This keeps the switch from overheating and makes it easier to add or remove lights later. Choose wire gauge and fuse size for the full load and route the cable away from hot exhaust parts and sharp body edges.
Off-road use adds vibration and water exposure, so look at the connectors and the lens each time the vehicle is cleaned. Dust or moisture inside the housing can reduce output over time. A clean, sealed lens and tight connectors help the bar keep working reliably on rough trails.
- Use a relay between the switch and the battery
- Inspect connectors for corrosion after wet trail use
- Check the lens for cracks and debris
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | RUG15209.06 |
| Light type | LED light bar, sold as a single bar |
| Housing length | 50 inch |
| LED count and light output | 96 OSRAM LEDs, 17K lumens |
| Power draw | 144 watts |
| Beam pattern | Combo: 90-degree flood and 8-degree spot |
| Lens | Clear |
| Finish | Black powder-coated die-cast aluminum |
| Mounting | Bracket |
| Weather rating | IP67 waterproof |
Vehicle fitment
The bar is a universal fit, so it is not built for one specific vehicle. The bracket mount means the position on a Jeep or other off-road vehicle is up to the owner. Check that the bracket location gives clear sight lines and that the wiring route stays away from heat and moving parts.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
At 144 watts, this bar should run from fused power through a relay, so the switch circuit does not carry the full load. Check local road-use rules before fitting a driving light to a street-registered vehicle.
What’s included
The item is sold as a single 50-inch light bar. Check the package contents against your installation before starting, including wiring, a relay and the mounting bracket.












