Overview
The RT Off-Road 3 Inch LED Cube Spot Lamp in black, part number RT28086, is a compact cube-shaped spot lamp for vehicles that need extra forward lighting. Each lamp uses four LEDs that RT Off-Road rates at 1236 lumens at 20 watts, a combination that gives a useful amount of light without asking much of the vehicle’s charging system.
The lamp body is die-cast aluminum with a polycarbonate lens, and it has a matte black anodized finish. RT Off-Road gives it an IP86 rating and a 50,000-hour LED bulb life. The company says these lamps are built to last in harsh conditions. The lamp mounts on a bracket.
Key features
- Cube-shaped lamp with four LEDs
- 1236 lumens at 20 watts
- Die-cast aluminum body with a polycarbonate lens
- Matte black anodized finish
- IP86 rating
- 50,000-hour LED bulb life
- Spot beam pattern with a clear lens
Aiming and beam placement
A spot lamp concentrates its light in a narrow, long beam, which suits seeing far ahead on open trails and country roads. Aim the lamp so the beam falls on the road ahead rather than into the eyes of oncoming drivers. Setting the angle on the bracket before tightening it saves adjusting later. Because the lamp is a single unit, the bracket position also decides how much of the beam reaches the ground in front of the vehicle.
Cable routing matters as much as aim. Keep wiring away from pedals, steering components and suspension travel, and secure it with clips so it cannot rub. A fuse close to the power source protects the circuit if a wire is pinched.
- Tighten the bracket after aiming
- Check the bracket for loosening after rough roads
- Keep the lens clean for full light output
Specifications
| Brand | RT Off-Road |
|---|---|
| Part number | RT28086 |
| Light type | LED cube light, sold as a single lamp |
| Light shape | Square |
| Size | 3 inch |
| LED count | 4 Phillips LEDs |
| Lumens | 1236 |
| Watts | 20 |
| Lens | Polycarbonate, clear |
| Body | Die-cast aluminum |
| Finish | Matte black anodized |
| Ingress rating | IP86 |
| LED life | 50,000 hours |
| Mounting | Bracket |
Vehicle fitment
The cube spot lamp is a universal fit and is not made for one vehicle. Its bracket mount lets the owner choose the location, such as a bumper, roof or light bar, on any vehicle with a suitable mounting point. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Secure the bracket before wiring, and route the cable so it is protected from moving parts. Fuse the circuit at the power source and check local rules on auxiliary spot lamps before using the lamp on a road vehicle.
What’s included
The package is one cube spot lamp. Check the package contents against your installation before starting.









