Bumper Lighting Mounts under Light Mounting Brackets & Cradles collects the brackets that carry an LED light bar or cube lights in or on a front bumper. Rigid Industries supplies center and lower bumper mounts for 20 and 30 inch SR-Series and E-Series bars on GM and Ford trucks, Go Rhino makes light plates and bar mounts for its BR and BRJ40 bumpers on the Wrangler JK, and Rugged Ridge and N-Fab offer factory-bumper light bars for the JK and Toyota 4Runner. Lights are not included.
Bumper Lighting Mounts
Showing 1–12 of 21 resultsSorted by popularity
-
Bumper Lighting Mounts
Rugged Ridge Rear LED Cube Mount (Passenger Side) – 11232.76
- Fits 2018–2026 Jeep Wrangler JL, 2-door and 4-door models, per the manufacturer list
- Passenger side rear LED cube mount, part RUG11232.76
- 2-piece bracket mounts from behind the bumper
- Designed to work with most popular aftermarket bumpers
- LED light not included
SKU: RUG11232.76 -
Bumper Lighting Mounts
Rigid Industries Ram 2500/3500 Bumper Light Mount – 41670
- Black bumper light mount for 2010 Dodge Ram 2500 and 3500, and 2011–2018 Ram 2500 and 3500
- Fits one 20-inch or 40-inch RIGID LED light bar in the listed series
- Part number RIG41670, stainless steel with black powder coat
- Includes all necessary hardware
- 2-year warranty, made in the USA
SKU: RIG41670 -
-
Bumper Lighting Mounts
Revtek Light Bar Mounting Kit – 20015
- Direct fit for 2014–2018 Toyota 4Runner and 2014 Toyota FJ Cruiser (Base) per the Revtek fitment list
- Heavy-duty steel light bar mount with black powder coat finish
- Works with most LED light bars and individual lights
- Multiple mounting points designed to reduce vibration
- Bolt-on design with an easy-to-follow instruction guide
- Part number REV20015
SKU: REV20015 -
Bumper Lighting Mounts
ICON Impact Light Bar Bracket Kit (Black) – 95155
- Bracket kit for a KC PRO6 light bar in the 7-light configuration on the ICON Impact front bumper
- Fits 2017–2021 Ford F-150 Raptor models
- Accommodates the PRO6’s integrated center support
- Requires ICON Impact Series Front Bumper, part 95150 or 95153
- 3/16-inch laser cut steel with semi-gloss black powder coat
SKU: ICO95155 -
Bumper Lighting Mounts
Go Rhino Power Actuated Hide-Away Light Bar Mount Kit (Black) – 340001T
- Go Rhino Power Actuated Hide-Away light bar mount kit in black, part number ORP340001T
- Designed for the Go Rhino Element front bumper
- A flip of a switch opens the protective light bar cover
- Universal fit, but built around the Element front bumper
SKU: ORP340001T -
-
Bumper Lighting Mounts
Rugged Ridge No Drill Light Bar – 11138.02
- Polished stainless factory bumper mount for 1997–2006 Jeep Wrangler (TJ)
- Bolts to existing mounting holes; no cutting, drilling or bumper removal
- Holds three 7-inch lights or two 10-inch lights
- Part number 11138.02
- Lights not included
SKU: RUG11138.02 -
Bumper Lighting Mounts
Bumper Mount Kit
- Bumper mount kit for 30-inch E-Series or Radiance light bars
- Fits 2017 Nissan Titan and 2016–2017 Nissan Titan XD in the PRO-4X, Platinum Reserve, S, SL and SV trims
- Part number 46581, 100% stainless steel with UV and abrasion resistant powder-coat
- Limited lifetime warranty
SKU: RIG46581 -
Bumper Lighting Mounts
Rigid Industries Center Bumper Mount Kit – 46536
- Center bumper mount for two 6-inch SAE, E-Series or SR-Series lights
- Fits 2015–2016 Chevrolet Silverado 2500 HD and 3500 HD
- Part number 46536, 100% stainless steel with UV and abrasion resistant powder-coat
- Bolts into existing factory location holes
- Lights not included
SKU: RIG46536 -
Bumper Lighting Mounts
Rigid Industries Center Bumper Mount Kit – 46506
- Center bumper mount for a 20-inch E-Series or SR-Series light
- Fits 2011–2014 GMC Sierra 2500 HD and 3500 HD in the Denali, SLE, SLT and WT trims
- Part number 46506, stainless steel with black powder coat
- Stainless steel hardware included
- Light not included
SKU: RIG46506 -
Bumper Lighting Mounts
Rigid Industries 20 Inch SR-Series Bumper Mount Kit – 40336
- Lower bumper mount for a 20-inch SR-Series light bar, with the light bar not included
- Fits 2009–2013 Chevrolet Silverado 1500 and 2008–2010 Silverado 2500 HD and 3500 HD in the listed trims
- Part number 40336, stainless steel with black powder coat finish
- Uses existing mounting hardware with no drilling or cutting
- Includes all necessary hardware
SKU: RIG40336
Why mount lights at the bumper
A bumper-mounted light bar sits low, out of the driver's eye line, and does not reflect off the hood the way a roof bar does. It is also hidden enough to keep a truck looking stock. The downside is that a low light is first in line for mud, rocks and brush, and it lights the ground close to the vehicle rather than far down the trail. For many trucks, a 20 or 30 inch bar in the lower bumper opening is the practical compromise between a pair of fog pods and a roof rack full of lights. The mounts here hold a specific bar length in a specific bumper, so plan both together.
Factory bumper mounts
Rigid's center and lower bumper mount kits for Chevrolet and GMC trucks and the Ford Super Duty hold one 20 inch E-Series or SR-Series bar, or a 30 inch SR-Series bar, in the lower grille opening. They are laser cut from stainless steel, powder coated black, and bolt to existing holes with no drilling. The N-Fab LBM bumper mounts for the 2014 to 2018 4Runner and 2007 to 2014 GMC HD trucks tuck a bar behind the grille or into the bumper opening, and the Rugged Ridge factory bumper light bar for the 2007 to 2018 Wrangler JK holds three 7 inch or two 10 inch lights above the stock bumper. In each case the listing names the bar size and series; a 20 inch single-row SR bar is far thinner than a 20 inch double-row E-Series bar, so match the series as well as the length.
- Check the trim list. GM HD trucks differ between Denali, SLE, SLT and WT bumpers-bumpers-tire-carriers-winch-mounts-2 in some years.
- Confirm the mount leaves room for a factory tow hook or front camera.
- Look at how the bar is retained: end brackets allow tilt for aiming, a cradle does not.
Aftermarket bumper plates
If you already run a Go Rhino BR5, BR10 or BRJ40 bumper, the light plates and bar mounts here are made for its openings. The BR10 light plate takes Rigid D-Series flush mount lights, the BRJ40 end cap plates upgrade the end cap lights to 4 inch cubes, and the Rockline and Roadline bar mounts bolt a light bar onto the BRJ40 for the two-door and four-door JK. These parts fit the bumper, not the vehicle directly, so verify the bumper model.
Material, wiring and aim
Stainless or heavy mild steel with a textured black powder coat is standard. Look for a finish warranty when the mount sits where salt and gravel hit it. Run the harness with a relay and fused power, route it away from the radiator fan and exhaust, and use a weatherproof connector near the bar so it can be removed. Aim a bumper bar slightly up so the beam reaches down the trail, then check that it does not blind oncoming drivers; most states restrict forward-facing off-road lights to off-highway use, so wire them to a separate switch and cover or disconnect them on the road. Confirm the mount matches your bumper, bar length and series before choosing.
Popular Bumper Lighting Mounts brands
Bumper Lighting Mounts FAQ
Does the mount include the light bar?
No. These are brackets and hardware only. Each listing names the light bar size and series it is designed to hold, such as a 20 inch Rigid SR-Series or E-Series bar, so choose the mount for the bar you own or plan to buy.
Can I use a different brand of light bar on a Rigid mount?
Sometimes. The mount is sized for a specific length and housing depth and uses Rigid's end bracket bolt pattern. Another brand's bar of the same length may fit with its own end brackets if the housing is similar, but check dimensions carefully; there is no guarantee.
Is a bumper light bar legal on the street?
Mounting it is generally allowed, but using forward-facing off-road lights on public roads is restricted in most states, and some require covers when the vehicle is on the highway. Wire the bar to its own switch, use it off road, and check your state and local regulations.
Do I need to drill my bumper to install one of these mounts?
Most factory bumper kits here bolt to existing holes with no drilling or cutting. Go Rhino plates fit the openings already in their bumpers. Universal brackets or mounts for unusual bumpers may need holes, so read the installation notes for your kit.










