Overview
The Rugged Ridge 15207.10 is a single halogen slim light with a clear lens, stem mounting and a 12V 100 watt halogen bulb. It is a universal fit light, so it is not tied to a single vehicle.
The light has a heavy-duty stamped steel housing and a crystal glass lens set in shock-absorbent, weatherproof rubber gaskets. Its 12V 100 watt halogen bulb is designed for off-road use. The narrow profile, just 2 13/16 inch thick, allows mounting where other lights will not fit, such as windshield and grille mount systems.
The light is sold as a single unit. The wiring harness, relay, stone guards and illuminated dash switch come in kits rather than with this single light.
Key features
- Single halogen slim light, sold as single
- 12V 100 watt halogen bulb
- Heavy-duty stamped steel housing
- Crystal glass lens with shock-absorbent weatherproof rubber gaskets
- Narrow profile, just 2 13/16 inch thick
- Stem mounting location, clear lens
- Suited to windshield and grille mount light systems
Auxiliary lighting and wiring
Auxiliary lights draw enough current that the wiring and switch matter as much as the light itself. A relay lets a switch control the light while the main current runs through a fused circuit, so the switch and wiring carry less load. Choose a mounting location with enough room for the light body, a clear line of sight and a wire route that stays away from heat and moving parts.
Halogen lights run warmer than LED lights, so keep the housing clear of plastic trim and check that the rubber gasket seals well after mounting. Stone guards help protect the lens from trail debris, and an illuminated dash switch makes it easy to see whether the light is on. Check local rules for auxiliary lighting before using the light on public roads.
- Use a fused, relayed circuit
- Keep the housing clear of heat-sensitive trim
- Check the gasket seal after mounting
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 15207.10 (RUG15207.10) |
| Product type | Halogen auxiliary light |
| Bulb type | Halogen, 12V 100 watt |
| Housing | Heavy-duty stamped steel |
| Lens | Crystal glass, clear |
| Gasket | Shock-absorbent weatherproof rubber |
| Profile thickness | 2 13/16 inch |
| Mounting location | Stem |
| Light shape | Round shape |
| Sold as | Single |
| Fitment type | Universal fit |
Vehicle fitment
The light is universal fit and is not tied to a specific vehicle.
Universal does not mean it suits every location. Check the mounting space, wiring route and your vehicle’s electrical capacity before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Wire auxiliary lights with a fused, relayed circuit sized for the load, using weatherproof connectors and secure routing away from heat and moving parts. If you are unsure about the wiring, have a qualified installer do it.
- Mount the light securely and aim it so it does not dazzle other drivers.
- Check your local regulations for auxiliary lighting use on public roads, and cover or switch off lights where required.
- Disconnect the battery before working on the wiring.
- Re-check mounting hardware and connections after the first miles of driving.
What’s included
One halogen slim light.
Not included: Wiring harness, relay, stone guards and dash switch, which come in kits. Check the mounting space, wiring route and electrical capacity before starting.










