Lighting & Lighting Accessories
Showing 2437–2448 of 2467 resultsSorted by popularity
-
Offroad Racing Fog & Driving Lights
Rigid Industries Radiance Red Back-Light Pods (Black) – 20202
- Rigid Industries Radiance Red back-light pod, black, part number 20202
- Red back-light controlled separately, 15 watts, 900 raw lumens
- 3 inch square housing, IP68, surface mount
- Fog beam, sold as a pair, brackets and wiring harness included
SKU: RIG20202 -
Offroad Racing Fog & Driving Lights
Rigid Industries SR-Series Pro 30 Inch Light Bar (Combo) – 930314
Offroad Racing Fog & Driving LightsRigid Industries SR-Series Pro 30 Inch Light Bar (Combo) – 930314
- Rigid Industries SR-Series Pro 30 inch light bar, spot/flood combo, part number 930314
- 160 watts, 30 LEDs, 18810 raw lumens
- Hybrid optics, instant on and off, under 2 inches tall
- Black finish, polycarbonate lens
SKU: RIG930314 -
Offroad Racing Fog & Driving Lights
E-Series Midnight Optic Spot Light
- 50-inch spot light bar with a black enamel Midnight Optic finish
- 100 white LEDs behind a hybrid spot optic
- Transparent black enamel coating and black oxide hardware
- Surface mount on a bracket, sold as a single bar
SKU: RIG150213BLK -
Offroad Racing Fog & Driving Lights
Rigid Industries SR-Series Pro 30 Inch Light Bar (Combo) – 931314
Offroad Racing Fog & Driving LightsRigid Industries SR-Series Pro 30 Inch Light Bar (Combo) – 931314
- Rigid Industries SR-Series Pro 30 inch light bar, driving/spot combo, part number 931314
- 205 watts, 34 LEDs, 21318 raw lumens
- Single row, low profile under 2 inches tall
- Patented Specter optics, 50,000+ hour lifespan
SKU: RIG931314 -
-
-
Offroad Racing Fog & Driving Lights
Rigid Industries Radiance Blue Back-Light Pods (Black) – 20201
- Rigid Industries Radiance Blue back-light pod, black, part number 20201
- Blue back-lighting controlled separately, 15 watts, 900 raw lumens
- 3 inch square housing, IP68, surface mount
- Fog beam, sold as a pair, brackets included
SKU: RIG20201 -
Offroad Racing Fog & Driving Lights
RIGID RDS-Series 50″ LED Midnight Optic Spot Light – 885213BLK
- Rigid Industries RDS-Series 50 inch Midnight Optic spot light bar, part number 885213BLK
- 100 white LEDs, 367 watts, 44550 raw lumens
- Black enamel finish with black oxide hardware
- Surface mount, hybrid optics, 389.5 m beam distance
SKU: RIG885213BLK -
Offroad Racing Fog & Driving Lights
E-Series 10 Deg. Spot/20 Deg. Flood Combo LED Light
- 30-inch combo light bar with 10-degree spot and 20-degree flood optics
- 60 white LEDs in a single bar.
- Hybrid optics with a 50,000-plus hour LED lifespan
- Surface mount on a bracket with a durable polycarbonate lens
SKU: RIG130313 -
What this category covers
Lighting for a 4x4 falls into two broad groups. The first is auxiliary lighting added to the vehicle: light bars, pod lights, fog and driving lamps, work lamps and rock lights. The second is replacement and repair lighting: headlights, tail and brake lights, side markers, bulbs, bezels and sockets that restore factory function. The subcategories here separate these so you can go straight to the type you need.
Choosing auxiliary lights
Start with what the light needs to do. Driving lights throw a longer, narrower beam for high-speed visibility on dirt roads. Fog lights spread low and wide to cut under dust and mist. Flood or work lamps light the area around the vehicle for camp and recovery tasks. Light bars combine these roles depending on optics, and many offer combination or hybrid beam patterns.
- Beam pattern: spot for distance, flood for width, combo for general use.
- Housing and sealing: look for an ingress protection rating suited to water crossings and pressure washing.
- Lens material: polycarbonate resists rock strikes better than glass but can scratch.
- Power draw: confirm the lamp's amperage against your wiring and alternator capacity.
Replacement lamps and bulbs
For factory-style repair, match the lamp to the exact year, make, model and side of the vehicle. Bulb type matters: halogen, HID and LED units are not always interchangeable in the same housing, and a poorly matched LED can scatter light and blind oncoming drivers. Check the bulb designation on the old unit or in the owner's manual before ordering.
Wiring and installation
Auxiliary lights should be wired through a relay with a correctly rated fuse, not straight from a switch. Use wire gauge appropriate for the current and length of run, seal connectors against moisture, and mount lights solidly so vibration does not loosen them. Accessory brackets and cradles are sold separately for many light bars, so confirm what is included in a given kit.
Legal and compatibility notes
Rules on auxiliary lighting vary by state. Many jurisdictions restrict forward-facing lights on public roads, require covers when not off-road, or limit color. Check your local regulations. Confirm fitment for your exact vehicle and review the manufacturer's specifications before installing.
A few habits make lighting upgrades last. Keep a short list of the bulb types and lamp part numbers on your vehicle, because side markers, headlights and tail lights often differ between model years and trims. When mounting auxiliary lights, aim them after installation on level ground at a wall or garage door, so the beam lands where you intend rather than into the eyes of other drivers. Inspect wiring for chafing after rough trips, and dab dielectric grease on connectors to resist corrosion. Replacement lenses and covers are sold for many popular lamps, so a cracked lens does not always mean a new light. Finally, think about total electrical load: several high-output lamps running at once can strain a stock alternator, particularly with a winch or fridge on the same system. Keep spare fuses and a small supply of weatherproof connectors in the vehicle, since a blown fuse is the most common reason a light stops working on the trail.
Popular Lighting & Lighting Accessories brands
- Rigid Industries (755)
- Hella (204)
- KC HiLites (189)
- Rugged Ridge (146)
- Spyder Auto Group (122)
- Oracle Lighting (108)
- Recon (101)
- Crown Automotive (100)
- Piaa Lighting (99)
- Omix-Ada (88)
- Baja Designs (83)
- JW Speaker (74)
Shop Lighting & Lighting Accessories by type
- Fog & Driving Lights (328)
- Offroad Racing (328)
- Offroad Racing Fog & Driving Lights (537)
- Lens Covers and Shields (251)
- Light Mounting Brackets & Cradles (290)
- Headlights Housings and Conversions (198)
- Replacement Headlights, Tail Lights & Bulbs (227)
- Replacement Bulbs (141)
- Tail & Brake Lights (129)
- Headlights (97)
- Side Marker Light Assembly (77)
- LED Replacement Bulbs (85)
- Light Bar Mounting Kit (64)
- Lighting Accessories (64)
- Headlight & Tail Light Bezel Sets (51)
- Fog/Driving Light Wiring Kit (35)
- Third Brake Lights (34)
- Auxiliary Lighting (32)
- Work Lamp (20)
- Roof Marker Light (20)
- Multi-Use Accent Lights (18)
- Headlight Switch (16)
- Work Lamps (11)
- License Plate Lighting (8)
- Side Marker Light Socket (8)
- Third Brake Light Bracket (8)
- Fog/Driving/Offroad Light Lens (7)
- Reverse / Backup Lights (5)
- LED Resistor (6)
- Off Road Light Bezel Sets (6)
Lighting & Lighting Accessories FAQ
What is the difference between driving lights and fog lights?
Driving lights produce a longer, tighter beam to extend your reach at speed. Fog lights produce a wide, flat beam mounted low to reduce glare off dust, rain or snow. They solve different problems, and many vehicles carry both.
Do I need a relay to install a light bar?
Yes, in most cases. A relay lets a small switch control a high-current circuit, and an inline fuse near the battery protects the wiring. Follow the lamp maker's wiring diagram and use wire sized for the current draw.
Can I replace halogen bulbs with LED bulbs?
Sometimes, but the housing was designed around a halogen filament. LED retrofit bulbs can produce poor beam patterns or glare in reflector housings. Check that the product is intended for your vehicle and review local lighting regulations.
Are off-road lights legal to use on the street?
Rules vary by state and usually restrict how auxiliary lights may be mounted, wired and used on public roads. Many require covers or separate switching. Check your local regulations before driving with them on.









