Overview
The Rigid Industries D-Series Dually 60 Deg. Diffusion LED Light is a set of two 3-inch square lights with a 60-degree diffusion beam for flush mounting. The diffusion optic spreads light across a wide area, and the beam suits close-range driving use around the vehicle.
The D-Series is a compact package with a larger cooling surface than most lights of its size. Output is listed at 1568 or 3096 lumens depending on the version. Each light uses four white LEDs and a hybrid optic.
Key features
- 60-degree diffusion beam
- Four white LEDs per light
- Hybrid optic in a square housing
- Flush mount for a clean installation
- Clear lens with a black finish
- Sold as a set of two
Planning a flush cut-out
A flush install is more permanent than a bracket mount, so measure twice before cutting. Confirm the panel is free of hidden wiring, fuel lines and structural ribs, and that the back side of the panel has clearance for the housing depth. A clean, square opening sits better and seals more easily than a rough one.
Sealing the gap around the housing helps keep out dust and water, and a bead of exterior-grade sealant or a gasket is common practice. Consider a backing plate on thin panels so the light does not flex the surface. Wire the pair through a fuse placed close to the power source and route the cable where it will not be pinched when the panel is removed. Test the fit with the lights set in place before final sealing.
- Check the panel for wiring and fuel lines before cutting
- Seal the gap around the housing
- Use a backing plate on thin panels
Specifications
| Brand | Rigid Industries |
|---|---|
| UPC | 849774027017 |
| Series | D-Series Dually |
| Light type | LED light, sold as a set of two |
| Light shape | Square, 3 inches |
| Mounting | Flush |
| Lens color | Clear |
| Beam pattern | 60-degree diffusion, driving |
| LED count | 4 white LEDs per light |
| Output | 1568 or 3096 lumens |
| Finish | Black |
Vehicle fitment
This light is not made for one vehicle, so placement and cut-out are planned for each install. Flush mounting means the panel opening must match the 3-inch housing before the pair goes on any vehicle.
Installation notes
Cut the flush opening to the housing size and route the wiring through a fused circuit. Keep the cable clear of moving parts, and check local rules on driving lights before using them on a road vehicle.
What’s included
The package holds two flush-mount lights. Confirm the package contents match your installation plan before starting, and plan a harness and mounting bezel for the cut-out.









