Fog/Driving Light Wiring Kit
Showing 25–35 of 35 resultsSorted by popularity
-
Fog/Driving Light Wiring Kit
Rigid Industries Truck-Lite H13 To H4 Adapter – 55007
- Rigid Industries Truck-Lite H13 to H4 adapter, model 55007
- Required for installing Rigid Industries LED headlamps into 2007 to 2016 Jeep Wrangler JK models
- Direct plug-in connection for 2-door and 4-door models
- Sold individually; UPC 849774014109
SKU: RIG55007 -
-
Fog/Driving Light Wiring Kit
PIAA Wiring Harness Up To 85W (PL5FB) with White Square Connectors – 34085
Fog/Driving Light Wiring KitPIAA Wiring Harness Up To 85W (PL5FB) with White Square Connectors – 34085
- Pre-assembled PIAA wiring harness rated up to 85W
- Switch, relay, fuse and light connectors included
- White square connectors, no cutting or splicing needed
- Limited Lifetime Warranty; universal fit
SKU: PIA34085 -
Fog/Driving Light Wiring Kit
KC HiLites JK H4 Headlight Conversion Kit (Clear) – 42302
- KC HiLites JK H4 headlight conversion kit with clear lens, number 42302
- Fits 2007 – 2013 JK Jeep Wrangler per the brand description
- Includes 2 headlights and 2 H13 to H4 conversion cables
- DOT approved, street legal replacement headlights
SKU: K/C42302 -
-
-
-
Fog/Driving Light Wiring Kit
Rigid Industries Back Up Light Kit Harness – 40192
- Wiring harness for Rigid Industries back up light kits, 25 feet long
- Three position switch with On, Off and Auto (Auto works when in reverse)
- Connects to D-Series, SR-Q Series and SR-M Series LED lights
- Universal fit, not built for a specific vehicle
SKU: RIG40192 -
Fog/Driving Light Wiring Kit
Rigid Industries Wire Harness – Hi/Po 40 Inch – 50 Inch Light Bar – 40190
Fog/Driving Light Wiring KitRigid Industries Wire Harness – Hi/Po 40 Inch – 50 Inch Light Bar – 40190
- Rigid Industries wire harness 40190 for one 40-50 inch LED light bar
- 12V, 14 AWG wire with battery terminals and Deutsch connector
- Includes inline fuse holder, 12V relay and waterproof switch
- Compatible with 50 inch E-Series and SR-Series bars
SKU: RIG40190 -
Fog/Driving Light Wiring Kit
Rigid Industries Truck-Lite LED Headlight PWM Anti Flicker Adaptor – H13 to H4 – 55006
Fog/Driving Light Wiring KitRigid Industries Truck-Lite LED Headlight PWM Anti Flicker Adaptor – H13 to H4 – 55006
- Rigid Industries Truck-Lite LED headlight PWM anti flicker adaptor, H13 to H4, model 55006
- Direct plug-in pigtails and 16 gauge wire
- Encapsulated circuitry
- Fitment not listed by year, make or model
SKU: RIG55006 -
Fog/Driving Light Wiring Kit
Rigid Industries Multi-Trigger Wire Harness
- Wiring harness designed for the Rigid Industries Radiance Pod Set
- Two independent circuits: circuit 1 for the primary LEDs, circuit 2 for backlighting
- Two backlit LED rocker switches, red and blue, for independent on and off
- Integrated fuse holder protects both circuits
- UPC 849774015830
SKU: RIG40300
Why a wiring kit matters
Auxiliary lights draw more current than a switch or factory wire is meant to carry. A harness uses a relay, so the switch only triggers a low current and the relay passes the high current directly from the battery, protected by a fuse near the power source. This helps prevent melted wires, blown fuses and voltage drop that makes lights look dim.
What a kit contains
- A relay, usually a 12 volt automotive type
- An inline fuse or fuse holder
- Power and ground leads sized for the load
- Connectors that plug into the lights, or bare leads for splicing
- A switch or switch leads
Some harnesses are made for a specific pair of lights, such as Rigid D2 pods or large light bars, while others are generic two-light kits.
Matching the kit to the lights
Count the lights and add up their rated current. The harness should be rated above that total. Wire gauge matters, since thinner wire carries less current and longer runs lose more voltage. Look for the connector type on your lights, such as Deutsch or a proprietary plug, so you do not have to cut or splice. For longer light bars, use a harness made for that size, since it will have heavier wire.
Installation notes
Disconnect the battery before starting. Mount the relay in a dry location, route wiring away from heat and moving parts, and use grommets where wires pass through the firewall. Fuse the power lead close to the battery. Seal outdoor connections with heat-shrink or dielectric grease to resist moisture and corrosion. Use a clean, bare-metal ground. If you are not comfortable with automotive wiring, a qualified installer can do it safely. Lighting laws differ by state, so check local rules about auxiliary lights on public roads and whether they must be covered when driving on pavement.
Compatibility
Fitment depends on the lights you own and, for vehicle-specific kits, on year, make and model. Check product details and manufacturer instructions before choosing. When splicing is needed, use quality crimp connectors or solder with heat shrink, not twist-and-tape joints, and secure the harness with ties every foot or so to keep it from vibrating loose.
Common mistakes to avoid
Do not tap power from a low-current circuit such as a parking light wire without a relay, and do not use a harness whose fuse is rated higher than the wire can carry. Keep wire runs as short as practical, and avoid running power wires along sharp edges. Check that every connection is tight, because a loose terminal creates heat. Protect wires with split loom or braided sleeve, especially near the engine bay. Always label the switch wiring, so future troubleshooting is easy. If lights flicker or dim, check the ground connection first. Test the full circuit with the engine running to confirm the voltage at the lights is steady.
Weatherproofing deserves attention in off-road use. Water crossings, mud and pressure washing all test connectors, so use sealed connectors and drip loops where wires drop below the connection point.
Popular Fog/Driving Light Wiring Kit brands
- Rigid Industries (15)
- Rugged Ridge (7)
- Pro Comp Suspension (4)
- Baja Designs (3)
- KC HiLites (3)
- Hella (2)
- Piaa Lighting (2)
- Omix-Ada (1)
- T-Rex Grilles (1)
- Truck-Lite (1)
- ARB 4x4 Accessories (1)
Fog/Driving Light Wiring Kit FAQ
Do I need a relay for off-road lights?
Yes, in most cases. A relay lets the battery feed the lights directly through a fuse, while the switch only carries a small control current. This protects switches and factory wiring from overload.
What fuse size should I use?
Pick a fuse rated slightly above the lights' combined current draw and below the wire's rating. Follow the light and harness manufacturer's instructions, and place the fuse near the battery.
Can I use one harness for several lights?
Only if the harness is rated for the total current of all lights. Check the relay and wire gauge rating, and use a kit designed for the number of lights, or a heavier setup.







