Overview
The Rigid Industries 40196 is a 14 foot wiring harness for a pair of D2 LED lights on a 12V electrical system. Battery terminals sit on one end, and Deutsch connectors on the other plug into the lights. An inline fuse holder, a 12V relay and a waterproof switch are built into the run.
The harness is universal fit, so it is not tied to any vehicle. It is made for the D2 (Pair) light set on a 12V system.
Key features
- 18 AWG wire carries power from the battery to the lights
- Battery terminals on one end, Deutsch connectors on the other
- Inline fuse holder in the circuit
- 12V relay and waterproof switch included
- Designed for a pair of D2 LED lights
Routing a pair of lights
Two lights on one harness share a single feed, so the wiring has to handle the combined load. Route the cable so both lights reach their connectors without tension, and leave a little slack at each bend. Keep the Deutsch connectors above the mud line where possible, since water entry is the common cause of dim or failing lights.
A thinner 18 AWG run is easy to route but can be more sensitive to voltage drop over distance. Keep the connections clean and tight at the battery end, and check the relay and switch when the lights start to dim. Use grommets where the cable passes through panels and clip it away from heat sources.
- Check both lights before finishing the mounting
- Keep the inline fuse holder close to the battery
- Inspect the connectors after each rough trip
Specifications
| Brand | Rigid Industries |
|---|---|
| UPC | 815711013009 |
| Length | 14 feet |
| Wire gauge | 18 AWG |
| Battery end | Battery terminals |
| Light end | Deutsch connectors |
| Fuse | Inline fuse holder |
| Relay | 12V |
| Switch | Waterproof |
| Compatible lights | D2 (Pair) |
| Fitment type | Universal fit |
Vehicle fitment
Universal fit, so the harness is not tied to any vehicle. Check the D2 pair match and your 12V system before wiring. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Keep the inline fuse holder near the battery end of the 18 AWG run. Keep the Deutsch connectors clear of moving suspension parts.
What’s included
A 14 foot harness with battery terminals, Deutsch connectors, an inline fuse holder, a 12V relay and a waterproof switch.
Not included: the D2 LED lights.









