Overview
The Rigid Industries Multi-Trigger Wire Harness is a wiring harness built for the Rigid Industries Radiance Pod Set. It splits the pod wiring into two independent circuits, so the primary LEDs and the backlighting can be switched separately.
Each circuit has its own backlit LED rocker switch, and the harness comes with a red switch and a blue switch. The harness is listed with a universal fit because it connects to the pod set rather than to a specific vehicle.
Key features
- Two independent circuits for an easier install
- Circuit 1 for the primary projecting LEDs on the Radiance Pod
- Circuit 2 for the backlighting circuit on the Radiance Pod
- Two backlit LED rocker switches, red and blue, included
- Integrated fuse holder protects both circuits
- Three connectors with built-in heat shrink ends for splicing in the pigtail
Wiring and switching tips
Two circuits let you run the primary LEDs alone or with the backlighting, which helps on dusty trails where the backlight might be distracting, or on hazy highways where the primary beam is more useful. Plan the switch positions before drilling so that each rocker is within easy reach and can be read at a glance without taking your eyes off the trail.
Because the harness has an integrated fuse holder, the fuse should sit close to the power source, and the connections should be sealed to keep moisture out. When a circuit stops working, check the fuse, switch and splices in that order. Heat shrink on each splice helps prevent corrosion, and a loose connection under vibration is a common cause of intermittent lighting.
- Check the fuse first when a circuit fails
- Keep switch wiring away from exhaust and moving parts
- Seal each splice fully with heat shrink
Specifications
| Brand | Rigid Industries |
|---|---|
| UPC | 849774015830 |
| Type | Wire harness |
| Compatible with | Rigid Industries Radiance Pod Set |
| Circuits | Two, independent |
| Switches | Two backlit LED rocker switches (red and blue) |
| Connectors | Three, with built-in heat shrink ends |
| Fuse | Integrated fuse holder |
Vehicle fitment
It is designed for the Rigid Industries Radiance Pod Set and is universal fit, so it is not tied to one vehicle. Confirm that your pod set and mounting setup match the harness before installing.
Installation notes
Splice the pigtail using the three connectors, which have built-in heat shrink ends. Route circuit 1 to the primary LEDs and circuit 2 to the backlighting, then mount the two rocker switches where each circuit can be operated on its own. Check the wiring against the pod set documentation and check local rules on auxiliary driving lights before use.
What’s included
The harness includes the integrated fuse holder, two backlit LED rocker switches (red and blue) and three connectors with heat shrink ends.
Not included: the Radiance Pod Set itself, which the harness is designed to connect to.









