Shock boots keep grit and water off a lifted shock's shaft and seal. How to size, vent and inspect one, when it can trap…
Shock Absorbers & Shock Accessories
Showing 589–600 of 902 resultsSorted by popularity
-
Shock Absorbers & Shock Accessories
FOX Performance Series 2.0 Smooth Body IFP Shock (Front) – 985-24-204
Shock Absorbers & Shock AccessoriesFOX Performance Series 2.0 Smooth Body IFP Shock (Front) – 985-24-204
- Front shock for 2014–2026 Ram 2500 and 3500 trucks
- Travel length 10.690 in, extended length 27.640 in, compressed length 16.950 in
- Stem top upper mount, eyelet lower mount, 2.0 in body
- Monotube design with floating piston and gas charge
- Part number FOX985-24-204
SKU: FOX985-24-204 -
Shock Absorbers & Shock Accessories
FOX Performance Series 2.0 Smooth Body IFP Shock – 985-24-239
- Rear reservoir shock for 2020–2026 Silverado and Sierra HD trucks
- Aluminum body with a clear anodized finish and external reservoir
- Black anodized reservoir clamp machined from 6061-T6 aluminum
- Eyelet top and bottom mounts, 2.0 in body
- Part number FOX985-24-239
SKU: FOX985-24-239 -
Shock Absorbers & Shock Accessories
Fox Performance Series 2.0 Smooth Body IFP Shock – 985-24-198
- Rear shock for 1992–2005 and 1999–2019 Ford E-350 vans
- Stem top upper mount, eyelet lower mount, 2.0 in body
- Internal floating piston monotube with a nitrogen charge
- Metal-impacted aluminum body with cooling capacity
- Part number FOX985-24-198
SKU: FOX985-24-198 -
Shock Absorbers & Shock Accessories
Fox Performance Series 2.0 Smooth Body IFP Shock – 985-24-197
- Front shock for 1992–2005 and 1999–2019 Ford E-350 vans
- Stem top upper mount, eyelet lower mount, 2.0 in body diameter
- Monotube design with internal floating piston and gas charge
- Aluminum body with metal-impact finish for cooling
- Part number FOX985-24-197
SKU: FOX985-24-197 -
Shock Absorbers & Shock Accessories
FOX Performance Series 2.0 Smooth Body IFP Shock – 985-24-193
- Rear shock for 2004–2020 Ford F-150, including Raptor versions
- Monotube design with internal floating piston and nitrogen gas charge
- Stem top upper mount and eyelet lower mount
- Metal-impacted aluminum body with cooling capacity
- Part number FOX985-24-193
SKU: FOX985-24-193 -
Shock Absorbers & Shock Accessories
Fox Performance Series 2.0 Smooth Body IFP Shock – 985-24-157
- Front shock for 2017–2022 Ford F-250 and F-350 Super Duty trucks
- Monotube design with internal floating piston and nitrogen charge
- Stem top upper mount, eyelet lower mount, 2.0 in body
- Application-specific valving with a high flow damping piston
- Part number FOX985-24-157
SKU: FOX985-24-157 -
Shock Absorbers & Shock Accessories
Fox Performance Series 2.0 Smooth Body IFP Shock – 985-24-155
- Front position for 2017–2022 Ford F-250 and F-350 Super Duty trucks
- Internal floating piston monotube with nitrogen gas charge
- Stem top and eyelet mounts, 2.0 in body diameter
- Aluminum body formed by metal impact
- Part number FOX985-24-155
SKU: FOX985-24-155 -
Shock Absorbers & Shock Accessories
Fox Performance Series 2.0 Smooth Body IFP Shock – 985-24-151
- Fits 2017–2022 Ford F-250 and F-350 Super Duty trucks
- Rear position, stem top and eyelet mounts, 2.0 in body diameter
- Internal floating piston monotube design with a nitrogen gas charge
- Metal-impacted aluminum body that resists rust and sheds heat
- Part number FOX985-24-151
SKU: FOX985-24-151 -
Shock Absorbers & Shock Accessories
FOX Performance Series 2.0 Smooth Body IFP Rear Shock Absorber – 985-24-207
Shock Absorbers & Shock AccessoriesFOX Performance Series 2.0 Smooth Body IFP Rear Shock Absorber – 985-24-207
- Rear FOX Performance Series 2.0 smooth body IFP monotube shock, part number FOX985-24-207
- Fits the 2019–2023 Ford Ranger Lariat, XL and XLT
- Lift range of 0 to 1.5; confirm the unit before ordering.
- Gas charged, direct-fit application
SKU: FOX985-24-207 -
Shock Absorbers & Shock Accessories
FOX Performance Series 2.0 Smooth Body IFP Rear Shock (0-2″ Lift) – 985-24-253
Shock Absorbers & Shock AccessoriesFOX Performance Series 2.0 Smooth Body IFP Rear Shock (0-2″ Lift) – 985-24-253
- Rear FOX Performance Series 2.0 smooth body IFP shock, part number FOX985-24-253, for a 0 to 2 inch lift
- Stem top upper mount and eyelet lower mount, 2.0 inch body diameter
- Monotube design
- Universal fit label with no vehicles named
SKU: FOX985-24-253 -
Shock Absorbers & Shock Accessories
FOX Performance Series 2.0 Smooth Body IFP Rear Shock – 985-24-209
Shock Absorbers & Shock AccessoriesFOX Performance Series 2.0 Smooth Body IFP Rear Shock – 985-24-209
- Rear FOX Performance Series 2.0 smooth body IFP shock, part number FOX985-24-209
- Fits the 2019–2022 Chevrolet Silverado 1500 and GMC Sierra 1500 in listed trims
- Lift range of 0 to 2
- 2.0 inch body, monotube design with a gas charge
SKU: FOX985-24-209 -
Shock Absorbers & Shock Accessories
FOX Performance Series 2.0 Reservoir Smooth Body Shock – 985-24-191
Shock Absorbers & Shock AccessoriesFOX Performance Series 2.0 Reservoir Smooth Body Shock – 985-24-191
- Front FOX Performance Series 2.0 smooth body reservoir shock, part number FOX985-24-191
- Fits the 2011–2019 Chevrolet Silverado and GMC Sierra 2500 HD and 3500 HD in listed trims
- External reservoir with billet reservoir clamp included
- Direct-fit application
SKU: FOX985-24-191
What a shock absorber does
A spring supports the vehicle, but it is the shock absorber that controls how fast the spring moves. Without damping, a vehicle would keep bouncing after every bump. The shock converts that motion into heat by forcing fluid through valving, which keeps the tire planted and the body under control on washboard, ruts and highway seams.
Common shock designs
- Twin-tube: a compact design with an inner and outer tube. It is common on stock-style and light-duty replacements and generally rides smoothly.
- Monotube: a single tube with a separate gas chamber, usually nitrogen charged. It tends to resist fade better under repeated hard use, and larger bores such as 46mm move more fluid.
- Remote reservoir: adds an external reservoir for extra fluid volume and cooling, aimed at fast desert driving and heavy off-road use.
- Coilover and strut assemblies: combine the spring and damper in one unit, common on independent front suspension.
How to choose
Start with lift height, because a shock has to fit the travel your suspension actually has. Compare collapsed length and extended length against your vehicle's specifications; a shock that is too short can limit droop, and one that is too long can bottom out inside its travel. Many listings in this category are matched to a lift range, such as stock height to 1.5 inches or a 3 to 3.5 inch kit, so read that range closely.
Also note the position (front or rear), whether the shock is sold individually or as a set, the mount style (loop, stem or bolt-in), and whether the vehicle has air or electronic suspension, since shocks made for standard suspension generally do not apply to those systems.
Accessories and rebuild parts
Extension brackets, relocation brackets and mount kits help when a lift changes shock geometry or when a larger shock needs a different mounting position. Boots protect the shaft from dirt and rock chips, and rebuild kits replace worn internal wear items on serviceable shocks. Spherical bearings and spacers fit specific eye sizes, so match the bore and hardware to your existing shock.
Installation notes
Support the axle or frame safely before removing a shock, and replace worn bushings and hardware at the same time. Tighten fasteners to the torque specified by the vehicle or shock manufacturer, ideally with the suspension at ride height so the bushings do not bind. Replace shocks in pairs on the same axle for even handling. If you are changing lift height or the suspension geometry, professional installation and an alignment check are sensible. Always confirm fitment for your exact year, make and model before ordering.
Matching shocks to how you drive
A daily driver that sees mostly pavement and graded roads is usually happiest with a well-valved monotube or twin-tube shock that keeps the ride composed and quiet. A weekend trail rig that crawls over rocks benefits from a shock with enough stroke to let the axle droop, while a truck that runs fast across desert washboard may call for larger bodies and added fluid capacity. Heavy loads such as a camper, a winch bumper or a roof tent change the picture again, because added weight makes damping and spring rate more important. Think about your typical load before choosing, and remember that shocks do not replace springs: if the vehicle sags, the springs may need attention before any shock will feel right. Keep notes on your part numbers and the lift height they were chosen for, since that information makes future replacement much easier.
Related guides
- Shock Boots: Why Every Lifted Shock Needs One
- Twin-Tube, Monotube or Reservoir: Picking the Right Shock
Twin-tube, monotube and reservoir shocks compared: how each handles heat, how to size one for your lift, and which design fits how you drive.
Popular Shock Absorbers & Shock Accessories brands
- Pro Comp Suspension (198)
- Bilstein (151)
- ICON Vehicle Dynamics (92)
- FOX (87)
- Rancho (77)
- Rough Country (64)
- Fabtech (63)
- Skyjacker (53)
- ARB 4x4 Accessories (21)
- Rubicon Express (18)
- King Shocks (16)
- Trail Master (14)
Shop Shock Absorbers & Shock Accessories by type
- Suspension Strut Assembly (38)
- Shock Absorber Mount (13)
- Multi Shock Bracket (4)
- Shock Absorber Spherical Bearing (3)
- Shock Absorber Monoball Spacer (1)
- Shock Absorber Relocation Bracket (1)
Shock Absorbers & Shock Accessories FAQ
How do I know when shocks are worn out?
Common signs include a bouncy or floaty ride, nose dive under braking, uneven tire wear, fluid leaking down the shock body, and clunking from loose or worn bushings. A bounce test and a visual inspection help, and shocks wear gradually, so many owners replace them in pairs.
Do I need longer shocks after a lift?
Usually yes. A lift increases the distance between the axle and frame, so the shock needs enough extended length to avoid limiting travel. Compare collapsed and extended length with the lift range listed on the product page and with your vehicle's specifications.
What is the difference between monotube and twin-tube shocks?
A monotube uses one tube with a separate gas chamber and generally handles heat better during repeated hard use. A twin-tube uses an inner and outer tube and often rides more softly. The right choice depends on your driving and vehicle.
Are shock absorbers sold individually or in pairs?
It varies by product. Some listings are a single shock, others are a pair or a set for the whole vehicle. Check the sold-as detail on the product page, then confirm the quantity and position before choosing a part.








