Shock boots keep grit and water off a lifted shock's shaft and seal. How to size, vent and inspect one, when it can trap…
Shock Absorbers & Shock Accessories
Showing 553–564 of 902 resultsSorted by popularity
-
Shock Absorbers & Shock Accessories
Icon Suspension 0 – 3 Inch Front 2.5 VS Coilover Shock Kit – 71505
Shock Absorbers & Shock AccessoriesIcon Suspension 0 – 3 Inch Front 2.5 VS Coilover Shock Kit – 71505
- Front 2.5 VS coilover for a 0 to 3 inch lift, GMT 900 Chevrolet and GMC half-ton trucks
- Adds 1 inch of wheel travel when paired with ICON arm part 78600
- More lift height than the standard travel coilovers
- Valved for the GMT 900 platform, 2WD and 4WD
- Part number ICO71505
SKU: ICO71505 -
Shock Absorbers & Shock Accessories
Icon Suspension 0 – 3 Inch Front 2.5 VS Coilover Shock Kit – 58610
Shock Absorbers & Shock AccessoriesIcon Suspension 0 – 3 Inch Front 2.5 VS Coilover Shock Kit – 58610
- Front coilover kit for 0 to 3 inch lift on 1996–2002 Toyota 4Runner and 1995–2004 Toyota Tacoma
- 2.5 VS series coilover with hydraulic damping
- Complete installation hardware included
- Recommended tire 285/75R16 with 16×8 wheels and 4.5 inch back spacing
- Part number ICO58610
SKU: ICO58610 -
Shock Absorbers & Shock Accessories
Icon Suspension 0 – 2.5 Inch Front 2.5 VS Coilover Shock Kit – 58620
Shock Absorbers & Shock AccessoriesIcon Suspension 0 – 2.5 Inch Front 2.5 VS Coilover Shock Kit – 58620
- Front coilover kit for 0 to 2.5 inch lift on 2000–2006 Toyota Tundra
- 2.5 series coilover with hydraulic damping
- Complete hardware included for installation
- Recommended tire size 285/75R16 with 16×8 wheels and 4.5 inch back spacing
- Part number ICO58620
SKU: ICO58620 -
Shock Absorbers & Shock Accessories
Icon Suspension 0 – 2 Inch Rear 2.5 Piggyback Shock Kit – 77750CP
Shock Absorbers & Shock AccessoriesIcon Suspension 0 – 2 Inch Rear 2.5 Piggyback Shock Kit – 77750CP
- Rear piggyback shock kit with CDCV valve for 2015 and newer Chevrolet Colorado and GMC Canyon
- 2.5 inch diameter body with a piggyback reservoir
- CDCV valve with 10 external settings from soft to hard
- Bump zone for added control at full compression
- Part number ICO77750CP
SKU: ICO77750CP -
Shock Absorbers & Shock Accessories
Icon 2.5 Inch Rear 2.5 V.S. Series Piggyback Reservoir Shock Absorber Set – 27726P
Shock Absorbers & Shock AccessoriesIcon 2.5 Inch Rear 2.5 V.S. Series Piggyback Reservoir Shock Absorber Set – 27726P
- Rear piggyback reservoir shock set for 2.5 inch lift, 2018–2026 Jeep Wrangler JL
- Piggyback reservoir with hydraulic damping
- Monotube-style piggyback design
- From ICON, a maker of aftermarket suspension for trucks and SUVs
- Part number ICO27726P
SKU: ICO27726P -
Shock Absorbers & Shock Accessories
Icon 2.0 Aluminum Series Rear Shock for 2.5 Inch Lift – 26524
- Rear monotube shock for 2.5 inch lift, fits 2018–2026 Jeep Wrangler JL
- Nitrogen charged with internal reservoir
- Chrome plated steel shaft and aluminum top cap
- Polyurethane bushings and zinc plated sleeves
- Part number ICO26524
SKU: ICO26524 -
Shock Absorbers & Shock Accessories
Icon 2.0 Aluminum Series Front Shock for 2.5 Inch Lift – 26523
- Front monotube shock for 2.5 inch lift, fits 2018–2026 Jeep Wrangler JL and 2020–2026 Gladiator
- Nitrogen charged with an internal reservoir
- Chrome plated hardened steel shaft and aluminum rod end
- Polyurethane bushings and forged steel mounting stems
- Part number ICO26523
SKU: ICO26523 -
Shock Absorbers & Shock Accessories
Fox Performance Series 2.0 Snap Ring Coil-Over IFP Shock – 985-62-009
Shock Absorbers & Shock AccessoriesFox Performance Series 2.0 Snap Ring Coil-Over IFP Shock – 985-62-009
- Front coilover shock for 2015–2020 Ford F-150 with bar pin lower mount
- Reuses the stock spring and mounting hardware through a custom spring seat
- Three preload settings for 0, 1 or 2 inches of lift
- Bar pin lower mount, impact-extruded aluminum body
- Part number FOX985-62-009
SKU: FOX985-62-009 -
Shock Absorbers & Shock Accessories
Fox Performance Series 2.0 Snap Ring Coil-Over IFP Shock – 985-62-004
Shock Absorbers & Shock AccessoriesFox Performance Series 2.0 Snap Ring Coil-Over IFP Shock – 985-62-004
- Front coilover shock for 2007–2013 Chevrolet Silverado 1500 and GMC Sierra 1500
- Reuses the stock spring and mounting hardware through a custom spring seat
- Three preload settings for 0, 1 or 2 inches of lift
- Impact-extruded aluminum body
- Part number FOX985-62-004
SKU: FOX985-62-004 -
Shock Absorbers & Shock Accessories
FOX Performance Series 2.0 Smooth Body Reservor Shock Absorber – 985-24-149
Shock Absorbers & Shock AccessoriesFOX Performance Series 2.0 Smooth Body Reservor Shock Absorber – 985-24-149
- Rear reservoir shock for 2017–2022 Ford F-250 and F-350 Super Duty
- Billet reservoir clamp included
- Aluminum body with external reservoir
- Monotube design, gas charged
- Part number FOX985-24-149
SKU: FOX985-24-149 -
Shock Absorbers & Shock Accessories
Fox Performance Series 2.0 Smooth Body Reservoir Shock with CD Adjuster – 985-26-164
Shock Absorbers & Shock AccessoriesFox Performance Series 2.0 Smooth Body Reservoir Shock with CD Adjuster – 985-26-164
- Front reservoir shock with CD adjuster for 2017–2022 Ford F-250 and F-350 Super Duty
- Stem top upper mount and eyelet lower mount
- External reservoir with billet clamp included
- 2.0 in body diameter, gas charged
- Part number FOX985-26-164
SKU: FOX985-26-164
What a shock absorber does
A spring supports the vehicle, but it is the shock absorber that controls how fast the spring moves. Without damping, a vehicle would keep bouncing after every bump. The shock converts that motion into heat by forcing fluid through valving, which keeps the tire planted and the body under control on washboard, ruts and highway seams.
Common shock designs
- Twin-tube: a compact design with an inner and outer tube. It is common on stock-style and light-duty replacements and generally rides smoothly.
- Monotube: a single tube with a separate gas chamber, usually nitrogen charged. It tends to resist fade better under repeated hard use, and larger bores such as 46mm move more fluid.
- Remote reservoir: adds an external reservoir for extra fluid volume and cooling, aimed at fast desert driving and heavy off-road use.
- Coilover and strut assemblies: combine the spring and damper in one unit, common on independent front suspension.
How to choose
Start with lift height, because a shock has to fit the travel your suspension actually has. Compare collapsed length and extended length against your vehicle's specifications; a shock that is too short can limit droop, and one that is too long can bottom out inside its travel. Many listings in this category are matched to a lift range, such as stock height to 1.5 inches or a 3 to 3.5 inch kit, so read that range closely.
Also note the position (front or rear), whether the shock is sold individually or as a set, the mount style (loop, stem or bolt-in), and whether the vehicle has air or electronic suspension, since shocks made for standard suspension generally do not apply to those systems.
Accessories and rebuild parts
Extension brackets, relocation brackets and mount kits help when a lift changes shock geometry or when a larger shock needs a different mounting position. Boots protect the shaft from dirt and rock chips, and rebuild kits replace worn internal wear items on serviceable shocks. Spherical bearings and spacers fit specific eye sizes, so match the bore and hardware to your existing shock.
Installation notes
Support the axle or frame safely before removing a shock, and replace worn bushings and hardware at the same time. Tighten fasteners to the torque specified by the vehicle or shock manufacturer, ideally with the suspension at ride height so the bushings do not bind. Replace shocks in pairs on the same axle for even handling. If you are changing lift height or the suspension geometry, professional installation and an alignment check are sensible. Always confirm fitment for your exact year, make and model before ordering.
Matching shocks to how you drive
A daily driver that sees mostly pavement and graded roads is usually happiest with a well-valved monotube or twin-tube shock that keeps the ride composed and quiet. A weekend trail rig that crawls over rocks benefits from a shock with enough stroke to let the axle droop, while a truck that runs fast across desert washboard may call for larger bodies and added fluid capacity. Heavy loads such as a camper, a winch bumper or a roof tent change the picture again, because added weight makes damping and spring rate more important. Think about your typical load before choosing, and remember that shocks do not replace springs: if the vehicle sags, the springs may need attention before any shock will feel right. Keep notes on your part numbers and the lift height they were chosen for, since that information makes future replacement much easier.
Related guides
- Shock Boots: Why Every Lifted Shock Needs One
- Twin-Tube, Monotube or Reservoir: Picking the Right Shock
Twin-tube, monotube and reservoir shocks compared: how each handles heat, how to size one for your lift, and which design fits how you drive.
Popular Shock Absorbers & Shock Accessories brands
- Pro Comp Suspension (198)
- Bilstein (151)
- ICON Vehicle Dynamics (92)
- FOX (87)
- Rancho (77)
- Rough Country (64)
- Fabtech (63)
- Skyjacker (53)
- ARB 4x4 Accessories (21)
- Rubicon Express (18)
- King Shocks (16)
- Trail Master (14)
Shop Shock Absorbers & Shock Accessories by type
- Suspension Strut Assembly (38)
- Shock Absorber Mount (13)
- Multi Shock Bracket (4)
- Shock Absorber Spherical Bearing (3)
- Shock Absorber Monoball Spacer (1)
- Shock Absorber Relocation Bracket (1)
Shock Absorbers & Shock Accessories FAQ
How do I know when shocks are worn out?
Common signs include a bouncy or floaty ride, nose dive under braking, uneven tire wear, fluid leaking down the shock body, and clunking from loose or worn bushings. A bounce test and a visual inspection help, and shocks wear gradually, so many owners replace them in pairs.
Do I need longer shocks after a lift?
Usually yes. A lift increases the distance between the axle and frame, so the shock needs enough extended length to avoid limiting travel. Compare collapsed and extended length with the lift range listed on the product page and with your vehicle's specifications.
What is the difference between monotube and twin-tube shocks?
A monotube uses one tube with a separate gas chamber and generally handles heat better during repeated hard use. A twin-tube uses an inner and outer tube and often rides more softly. The right choice depends on your driving and vehicle.
Are shock absorbers sold individually or in pairs?
It varies by product. Some listings are a single shock, others are a pair or a set for the whole vehicle. Check the sold-as detail on the product page, then confirm the quantity and position before choosing a part.


