Overview
The FOX985-24-207 is a rear 2.0 Performance Series smooth body IFP monotube shock for the 2019 to 2023 Ford Ranger. It fits Lariat, XL and XLT models.
It is a rear monotube design with an IFP that separates shock oil from nitrogen. The lift range is 0 to 1.5, so confirm the unit before ordering.
The damping is designed for a comfortable on-road ride and predictable off-road handling in tough conditions. The precision aluminum body adds cooling capacity and resists rust.
The IFP separates the shock oil from the nitrogen gas chamber, which FOX says prevents oil aeration. A high flow damping piston with application specific valving is what FOX credits for ride quality on rough roads.
Key features
- Rear position
- Monotube IFP design
- Nitrogen gas chamber
- Aluminum body for cooling and rust resistance.
- Application specific valving.
- Lift range 0 to 1.5, unit not shown
Choosing a rear shock setup
A rear shock carries a large share of the work when the truck is loaded, crossing ruts, or driving over washboard. Its job is to control spring movement so the tires stay in contact with the ground and the body does not bounce after each bump. On a pickup that spends time on pavement and trail, the rear damping works almost constantly, so the internal parts see steady heat and pressure.
When choosing a replacement, start with the basics: the year, model and trim, the mounting style, and the overall length at full extension and full compression. Think about how the truck is used. A daily driver with light trail use has different needs from a truck that carries gear or pulls a trailer. Many owners replace rear shocks at the same time as front shocks so the ride stays balanced.
- Compare mount style and eye-to-eye length with the old shock
- Consider load and trail use when choosing a damping setup
- Replace shocks in pairs for even handling
- Check bump stops and springs when the ride feels different
Specifications
| Brand | FOX |
|---|---|
| Part number | FOX985-24-207 |
| Series | IFP 2.0 |
| Position | Rear |
| Shock type | Monotube |
| Charge | Gas charged |
| Lift range | 0 to 1.5 (unit not shown) |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for the 2019 to 2023 Ford Ranger in Lariat, XL and XLT models.
The list covers 2019 to 2023 Ranger models in the three trims named. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the lift range, which is listed without a unit, and compare the mounts and length with the original rear shock before fitting. Work on a securely supported vehicle.
What’s included
One rear monotube IFP shock.









