Overview
The FOX985-24-209 is a rear Performance Series 2.0 smooth body IFP monotube shock for the 2019 to 2021 Chevrolet Silverado 1500 and GMC Sierra 1500, and the 2022 Silverado 1500 LTD and Sierra 1500 Limited. It fits Silverado trims Custom, Custom Trail Boss, High Country, LT, LT Trail Boss, LTZ, RST, SSV and WT, and Sierra trims AT4, Base, Denali, Elevation, Pro, SLE and SLT.
The position is rear, the body diameter is 2.0 inches, and the charge is gas. The lift range is 0 to 2, and that range should be confirmed before relying on it.
FOX designs these shocks for a comfortable on-road ride with predictable off-road handling, using damping control built on race experience. The aluminum body increases cooling capacity and does not rust.
The IFP keeps the shock oil apart from the high-pressure, nitrogen-charged gas chamber, which avoids oil aeration. The high flow piston and application-specific valving support ride quality on rough roads.
Key features
- Rear position
- Monotube IFP design
- Nitrogen-charged gas chamber
- 2.0 inch body diameter
- Aluminum body that increases cooling capacity and resists rust.
- Application specific valving.
Lift range and ride height
A rear shock’s lift range matters because it sets how far the shock can extend and compress once the truck is raised. On a 1500 pickup, the rear axle carries the bed and any load, so a shock matched to the lift helps the truck ride level and keeps the tires in good contact with the ground. Measure the current lift before comparing ranges, including any blocks or spacers already installed.
Rear shocks are often replaced with the rear springs or bump stops when a lift changes, because the existing parts may no longer match the new ride height. Check the rear springs for sag, the bump stops for cracking, and the mounts for wear. A gas-charged monotube shock can feel firmer than a standard shock, so take a test drive and note any change in how the bed rides when loaded.
- Measure lift height before ordering
- Check rear bump stops for cracks
- Inspect rear mounts after the first few drives
Specifications
| Brand | FOX |
|---|---|
| Part number | FOX985-24-209 |
| Series | 2.0 Performance Series |
| Position | Rear |
| Shock type | Monotube |
| Body diameter | 2.0 inches |
| Charge | Gas charged |
| Lift range | 0 to 2 (unit not shown) |
| Design | IFP |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2019 to 2021 Chevrolet Silverado 1500 (Custom, Custom Trail Boss, High Country, LT, LT Trail Boss, LTZ, RST, SSV and WT), the 2022 Silverado 1500 LTD (same trims), the 2019 to 2021 GMC Sierra 1500 (AT4, Base, Denali, Elevation, SLE and SLT) and the 2022 Sierra 1500 Limited (AT4, Denali, Elevation, Pro, SLE and SLT).
The list covers 2019 to 2022 1500 trucks in the years and trims shown. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the lift range against your truck, since it is listed without a unit, and compare the body and mounts with the original rear shock before fitting. Work on a securely supported vehicle.
What’s included
One rear IFP shock.













