Select your vehicle

FOX Performance Series 2.0 Smooth Body IFP Rear Shock (0-2″ Lift) – 985-24-253

FOX

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rear FOX Performance Series 2.0 smooth body IFP shock, part number FOX985-24-253, for a 0 to 2 inch lift
  • Stem top upper mount and eyelet lower mount, 2.0 inch body diameter
  • Monotube design
  • Universal fit label with no vehicles named

Description

Overview

The FOX985-24-253 is a rear 2.0 Performance Series smooth body IFP monotube shock designed for a 0 to 2 inch lift.

The line uses current shock technology, with race-proven damping for a comfortable on-road ride and predictable handling off road.

The precision metal impact aluminum body is designed to increase cooling and resist rust. The internal floating piston separates the shock oil from the high-pressure, nitrogen-charged gas chamber, which helps prevent oil aeration.

The shock has a stem top upper mount, an eyelet lower mount, a 2.0 inch body diameter and a monotube design in the rear position. Confirm the charge type against your current rear shock before fitting.

Key features

  • Rear position
  • Monotube design
  • Stem top upper mount and eyelet lower mount
  • 2.0 inch body diameter
  • Lift range of 0 to 2 inches.
  • Internal floating piston.

Lift range and shock length

Lift changes the geometry of the rear suspension, which changes how far the shock extends and compresses. A shock built for a specific lift range keeps the damping in the right part of its stroke, so measuring your current lift and the original shock length is the first step. Look at the axle position, spring height and bump stop clearance before deciding on a replacement.

Lifted trucks often need attention to brake lines, bump stops and driveline angles as well as the shocks. Check each of these after the suspension changes and again after the first few trail runs. Keeping the mounts clean and lubricating bushings helps the shock move freely through its full travel.

  • Measure the current lift and original shock length
  • Check bump stop clearance after the change
  • Inspect brake lines and driveline angles

Specifications

Brand FOX
Part number FOX985-24-253
Series 2.0 Performance Series
Position Rear
Shock type Monotube
Top mount Stem top
Bottom mount Eyelet
Body diameter 2.0 inches
Lift 0 to 2 inches, per title
Fitment type Universal label, no vehicles named

Vehicle fitment

Confirm fit for your vehicle’s year, model and trim before ordering.

Installation notes

Compare the stem top and eyelet mounts with the original rear shock before fitting, and confirm your lift falls within 0 to 2 inches. Measure the original shock’s length as well, and work on a securely supported vehicle.

What’s included

One rear monotube shock.

Questions & Answers

Which vehicle does the FOX985-24-253 fit?

Confirm fit for your vehicle's year, model and trim before ordering. This rear monotube shock is built for a 0 to 2 inch lift, so check your suspension setup against that range.

What lift is it for?

The shock is designed for a 0 to 2 inch lift. Confirm that your lift falls within that range before ordering, since a different lift height may need a different shock.

Is it gas charged?

Confirm the charge type against your current rear shock before ordering. Gas and non-gas designs respond differently, so matching the charge helps keep the ride consistent.

Do I need longer brake lines or bump stops with a lift?

A lift can change the geometry of the brake lines and bump stops, so inspect them when the suspension changes. Shock length, spring height and axle position all affect how far the rear shock travels. Check each part before a trail run.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon