Overview
Part number FOX985-62-009 is a front snap ring coilover IFP shock fitting 2015–2020 Ford F-150 trucks. It uses a bar pin lower mount in place of the eyelet on the FOX985-62-004 coilover, so the two parts are not interchangeable.
The custom-molded spring seat lets the stock spring and mounting hardware be reused. Inside, an internal floating piston separates the nitrogen gas from the shock oil, which FOX says avoids the mixing seen in standard twin-tube shocks and keeps the factory-tuned valving on track.
The bar pin lower mount is the main difference from the eyelet version of this coilover, so the lower attachment on your F-150 should be checked before ordering. The custom spring seat allows the stock spring to be reused, and the three preload settings let the owner choose 0, 1 or 2 inches of lift before installation.
The shock uses an internal floating piston and nitrogen gas charge to keep damping steady. The aluminum body is impact-extruded and light, and it resists rust, which suits the front of a pickup driven on rough roads.
Key features
- Custom-molded spring seat that allows the stock spring to stay in use.
- Three preload settings for 0, 1 or 2 inches of lift.
- Internal floating piston keeps the nitrogen gas apart from the oil.
- Impact-extruded aluminum body that is light and rust resistant.
- Bar pin lower mount on a 2.0 in body.
Checking the lower mount
The bar pin lower mount is the detail that matters most on this coilover. It connects differently from an eyelet, so the bushing, the bracket and the pin should be checked for fit and wear before installation. A mismatch here is easy to miss until the shock is loaded, so confirm the lower attachment on the truck first.
On a pickup used on rough roads, the front coilover takes repeated impacts. Check the spring seat for cracks, the upper mount for play and the body for dents after rough trail use. Replace worn bushings in the same job, since a loose lower mount reduces control and speeds up wear on the new shock.
- Confirm the lower mount type before ordering
- Check the bar pin and bracket for wear
- Inspect the spring seat after rough trail use
- Replace worn upper and lower bushings during the job
Specifications
| Brand | FOX |
|---|---|
| Part number | FOX985-62-009 |
| Shock series | 2.0 Performance Series |
| Position | Front |
| Top mount | OEM |
| Bottom mount | Bar pin |
| Body diameter | 2.0 in |
| Shock type | Coilover, IFP |
| Charge | Gas charged |
Vehicle fitment
It fits the 2015–2020 Ford F-150 across its trim levels, including King Ranch, Platinum, Raptor, XL and XLT. Other F-150 years and Super Duty models are not included.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the stock spring is reused, the preload setting should be chosen for the intended lift before the shock is installed.
What’s included
One front coilover shock with the custom spring seat. The stock spring and mounting hardware are reused, not supplied.









