Shock boots keep grit and water off a lifted shock's shaft and seal. How to size, vent and inspect one, when it can trap…
Shock Absorbers & Shock Accessories
Showing 541–552 of 902 resultsSorted by popularity
-
Shock Absorbers & Shock Accessories
Icon Suspension 2.0 Aluminum Series Remote Reservoir Shock – 56502R
Shock Absorbers & Shock AccessoriesIcon Suspension 2.0 Aluminum Series Remote Reservoir Shock – 56502R
- Rear remote reservoir 2.0 Aluminum Series shock for 1995–2004 Toyota Tacoma
- Vehicle-specific valving and rebuildable design
- Aluminum body for heat dissipation
- Direct-fit rear position
- Part number ICO56502R
SKU: ICO56502R -
Shock Absorbers & Shock Accessories
Icon Suspension 2 Inch Rear 2.5 Series Piggyback Reservoir Shocks – 217707P
Shock Absorbers & Shock AccessoriesIcon Suspension 2 Inch Rear 2.5 Series Piggyback Reservoir Shocks – 217707P
- Rear 2.5 Series piggyback reservoir shock for a 2 inch lift, fits 2014–2018 Ram 2500
- 6061 billet aluminum manifold creates an internal bump zone
- Bump zone adds about 20% more damping force near full compression
- Rebuildable and revalveable
- Part number ICO217707P
SKU: ICO217707P -
Shock Absorbers & Shock Accessories
Icon Suspension 1-3 Inch Lift Rear Shock 2.0 Aluminum Series – 216524
Shock Absorbers & Shock AccessoriesIcon Suspension 1-3 Inch Lift Rear Shock 2.0 Aluminum Series – 216524
- Rear 2.0 Aluminum Series shock for a 1 to 3 inch lift, fits Ram 1500 2009–2024
- Nitrogen-charged monotube with an internal reservoir
- One-piece linear and digressive piston with 5WT shock oil
- Rebuildable and revalveable
- Part number ICO216524
SKU: ICO216524 -
Shock Absorbers & Shock Accessories
Icon Suspension 1.75 – 3 Inch Front Remote Reservoir Coilover Shock Kit with CDCV – 71510C
Shock Absorbers & Shock AccessoriesIcon Suspension 1.75 – 3 Inch Front Remote Reservoir Coilover Shock Kit with CDCV – 71510C
- Front remote reservoir coilover with CDCV valve for a 1.75 to 3 inch lift, fits 2015–2022 Chevrolet Colorado and GMC Canyon
- CDCV valve with 10 external settings from soft to hard
- 2.5 inch body with a remote reservoir
- Designed to pair with ICON rear shocks for balanced front to rear control
- Part number ICO71510C
SKU: ICO71510C -
Shock Absorbers & Shock Accessories
Icon Suspension 1.75 – 3 Inch Front Remote Reservoir Coilover Shock Kit – 71510
Shock Absorbers & Shock AccessoriesIcon Suspension 1.75 – 3 Inch Front Remote Reservoir Coilover Shock Kit – 71510
- Front remote reservoir coilover for a 1.75 to 3 inch lift, for 2015–2022 Chevrolet Colorado and GMC Canyon
- 2.5 inch shock body with increased piston area
- Remote reservoir for steady damping during heavy use
- Vehicle-specific valving for a sport-tuned feel
- Part number ICO71510
SKU: ICO71510 -
Shock Absorbers & Shock Accessories
Icon Suspension 1.75 – 3 Inch Front 2.5 Coilover Shock Kit – 71010
Shock Absorbers & Shock AccessoriesIcon Suspension 1.75 – 3 Inch Front 2.5 Coilover Shock Kit – 71010
- Front 2.5 coilover kit for a 1.75 to 3 inch lift, fits 2015–2022 Chevrolet Colorado and GMC Canyon
- Hydraulic damping in an adjustable coilover layout
- Complete installation hardware included
- Recommended tire 285/75R16 on 16×8 wheels with 4.5 inch back spacing
- Part number ICO71010
SKU: ICO71010 -
Shock Absorbers & Shock Accessories
Icon Suspension 0-2 Inch Lift Rear Shock 2.0 Aluminum Series – 76526
Shock Absorbers & Shock AccessoriesIcon Suspension 0-2 Inch Lift Rear Shock 2.0 Aluminum Series – 76526
- Rear shock for a 0 to 2 inch lift, fits Chevrolet Silverado and GMC Sierra 1500 and Yukon models
- Premium 5WT shock oil and a one-piece linear and digressive piston
- 5/8 inch polished steel shaft
- Aluminum body and reservoir tubing
- Part number ICO76526
SKU: ICO76526 -
Shock Absorbers & Shock Accessories
Icon Suspension 0 -3 Inch Rear 2.0 Aluminum Series Remote Reservoir Shock – 216522R
Shock Absorbers & Shock AccessoriesIcon Suspension 0 -3 Inch Rear 2.0 Aluminum Series Remote Reservoir Shock – 216522R
- Rear remote reservoir shock for a 0 to 3 inch lift, fits 2003–2013 Dodge and Ram 2500 and 3500 trucks
- 2.0 Aluminum Series with hydraulic damping and gas charge
- Fully rebuildable and revalveable
- Direct-fit rear position
- Part number ICO216522R
SKU: ICO216522R -
Shock Absorbers & Shock Accessories
Icon Suspension 0 -2 Inch Rear 2.0 VS Aluminum Shock – 76550
- Rear 2.0 VS aluminum shock for 0 to 2 inch lift on 2015–2022 Chevrolet Colorado and GMC Canyon
- Vehicle-specific valving for on- and off-road performance
- Rebuildable and revalveable
- Includes all required hardware
- Part number ICO76550
SKU: ICO76550 -
Shock Absorbers & Shock Accessories
Icon Suspension 0 -1.5 Inch Rear 2.5 Aluminum Shock Kit – 57620P
Shock Absorbers & Shock AccessoriesIcon Suspension 0 -1.5 Inch Rear 2.5 Aluminum Shock Kit – 57620P
- Rear 2.5 aluminum shock kit for 0 to 1.5 inch lift on 2007–2021 Toyota Tundra
- Configured for the application in length and damping tune
- 100% rebuildable and revalveable
- Larger diameter and oil volume than the 2.0 Aluminum Series
- Part number ICO57620P
SKU: ICO57620P -
Shock Absorbers & Shock Accessories
Icon Suspension 0 – 3.5 Inch Front Coilover Shock Kit – 58650
- Front coilover kit with 3.5 bypass reservoir for 2007–2021 Toyota Tundra
- Adds 2 inches of wheel travel
- Hardware for installation included
- Recommended tire 305/60R18 on 18×9 wheels with 5 inch back spacing
- Part number ICO58650
SKU: ICO58650 -
Shock Absorbers & Shock Accessories
Icon Suspension 0 – 3.5 Inch Front Coilover Shock Kit – 58630
- Front coilover kit for 0 to 3.5 inch lift on 2005–2023 Toyota Tacoma
- 3.5 bypass reservoir coilover with hydraulic damping
- Complete hardware plus sway bar relocation bracket kit
- Recommended tire 285/75R16 on 16×8 wheels with 5 inch back spacing
- Part number ICO58630
SKU: ICO58630
What a shock absorber does
A spring supports the vehicle, but it is the shock absorber that controls how fast the spring moves. Without damping, a vehicle would keep bouncing after every bump. The shock converts that motion into heat by forcing fluid through valving, which keeps the tire planted and the body under control on washboard, ruts and highway seams.
Common shock designs
- Twin-tube: a compact design with an inner and outer tube. It is common on stock-style and light-duty replacements and generally rides smoothly.
- Monotube: a single tube with a separate gas chamber, usually nitrogen charged. It tends to resist fade better under repeated hard use, and larger bores such as 46mm move more fluid.
- Remote reservoir: adds an external reservoir for extra fluid volume and cooling, aimed at fast desert driving and heavy off-road use.
- Coilover and strut assemblies: combine the spring and damper in one unit, common on independent front suspension.
How to choose
Start with lift height, because a shock has to fit the travel your suspension actually has. Compare collapsed length and extended length against your vehicle's specifications; a shock that is too short can limit droop, and one that is too long can bottom out inside its travel. Many listings in this category are matched to a lift range, such as stock height to 1.5 inches or a 3 to 3.5 inch kit, so read that range closely.
Also note the position (front or rear), whether the shock is sold individually or as a set, the mount style (loop, stem or bolt-in), and whether the vehicle has air or electronic suspension, since shocks made for standard suspension generally do not apply to those systems.
Accessories and rebuild parts
Extension brackets, relocation brackets and mount kits help when a lift changes shock geometry or when a larger shock needs a different mounting position. Boots protect the shaft from dirt and rock chips, and rebuild kits replace worn internal wear items on serviceable shocks. Spherical bearings and spacers fit specific eye sizes, so match the bore and hardware to your existing shock.
Installation notes
Support the axle or frame safely before removing a shock, and replace worn bushings and hardware at the same time. Tighten fasteners to the torque specified by the vehicle or shock manufacturer, ideally with the suspension at ride height so the bushings do not bind. Replace shocks in pairs on the same axle for even handling. If you are changing lift height or the suspension geometry, professional installation and an alignment check are sensible. Always confirm fitment for your exact year, make and model before ordering.
Matching shocks to how you drive
A daily driver that sees mostly pavement and graded roads is usually happiest with a well-valved monotube or twin-tube shock that keeps the ride composed and quiet. A weekend trail rig that crawls over rocks benefits from a shock with enough stroke to let the axle droop, while a truck that runs fast across desert washboard may call for larger bodies and added fluid capacity. Heavy loads such as a camper, a winch bumper or a roof tent change the picture again, because added weight makes damping and spring rate more important. Think about your typical load before choosing, and remember that shocks do not replace springs: if the vehicle sags, the springs may need attention before any shock will feel right. Keep notes on your part numbers and the lift height they were chosen for, since that information makes future replacement much easier.
Related guides
- Shock Boots: Why Every Lifted Shock Needs One
- Twin-Tube, Monotube or Reservoir: Picking the Right Shock
Twin-tube, monotube and reservoir shocks compared: how each handles heat, how to size one for your lift, and which design fits how you drive.
Popular Shock Absorbers & Shock Accessories brands
- Pro Comp Suspension (198)
- Bilstein (151)
- ICON Vehicle Dynamics (92)
- FOX (87)
- Rancho (77)
- Rough Country (64)
- Fabtech (63)
- Skyjacker (53)
- ARB 4x4 Accessories (21)
- Rubicon Express (18)
- King Shocks (16)
- Trail Master (14)
Shop Shock Absorbers & Shock Accessories by type
- Suspension Strut Assembly (38)
- Shock Absorber Mount (13)
- Multi Shock Bracket (4)
- Shock Absorber Spherical Bearing (3)
- Shock Absorber Monoball Spacer (1)
- Shock Absorber Relocation Bracket (1)
Shock Absorbers & Shock Accessories FAQ
How do I know when shocks are worn out?
Common signs include a bouncy or floaty ride, nose dive under braking, uneven tire wear, fluid leaking down the shock body, and clunking from loose or worn bushings. A bounce test and a visual inspection help, and shocks wear gradually, so many owners replace them in pairs.
Do I need longer shocks after a lift?
Usually yes. A lift increases the distance between the axle and frame, so the shock needs enough extended length to avoid limiting travel. Compare collapsed and extended length with the lift range listed on the product page and with your vehicle's specifications.
What is the difference between monotube and twin-tube shocks?
A monotube uses one tube with a separate gas chamber and generally handles heat better during repeated hard use. A twin-tube uses an inner and outer tube and often rides more softly. The right choice depends on your driving and vehicle.
Are shock absorbers sold individually or in pairs?
It varies by product. Some listings are a single shock, others are a pair or a set for the whole vehicle. Check the sold-as detail on the product page, then confirm the quantity and position before choosing a part.

