Overview
The FOX reservoir mounting block, part number FOX026-01-000-B, mounts a FOX remote reservoir.
No reservoir model, size or vehicle is given, so confirm the block matches the reservoir you are mounting.
Remote reservoir mounting
A remote reservoir mounts away from the shock body and connects through a hose. Mounting blocks hold the reservoir steady so it does not flex the hose or rub on the frame. Secure the block firmly, keep the hose free of tight bends, and check that the reservoir sits clear of tires and suspension travel.
Reservoirs can gather road grime and heat during hard use, so check the mounting hardware and hose ends during regular service. Look for weeping at fittings, cracked hoses and loose clamps. If the mounting surface is damaged, replace the block rather than shimming it, since a shifting reservoir can rub and wear through a hose over time.
- Check hose ends for weeping
- Tighten mounting hardware after the first drives
- Route hoses away from exhaust heat
Specifications
| Brand | FOX |
|---|---|
| Part number | FOX026-01-000-B |
| Product type | Reservoir mounting block |
Vehicle fitment
Confirm fit against your reservoir’s model before ordering.
What’s included
Only the mounting block is described.









