Learn how a Dana 44 axle vent works, which vent locations let water into the gear oil, and how to add a top-mounted breather…
Dana 44 Ring and Pinion
Showing 25–36 of 68 resultsSorted by popularity
-
-
-
-
-
-
-
-
Dana 44 Ring and Pinion
Alloy USA JK Dana 30 Front & Rear 4.56 Ring and Pinion Kit – 360009
- Alloy USA 360009 front and rear ring and pinion kit, 4.56 ratio
- Dana 30 JK and Dana 44 JK axle types listed
- Inferred fit for the Wrangler JK, 2007-2018, from the JK Dana 30 title
- Complete kit for upgrading front and rear axles
SKU: ALY360009 -
Dana 44 Ring and Pinion
Alloy USA JK Rubicon D44 4.10 Front And Rear Ring and Pinion Kit With Install Kits – 360005
Dana 44 Ring and PinionAlloy USA JK Rubicon D44 4.10 Front And Rear Ring and Pinion Kit With Install Kits – 360005
- Alloy USA 360005 front and rear D44 ring and pinion kit with install kits
- 4.10 gear ratio on Dana 44 JK axle type
- Inferred fit for the Wrangler JK, 2007-2018, from the JK Rubicon title
- Matched gears and install kits included
SKU: ALY360005 -
Dana 44 Ring and Pinion
Alloy USA JK Dana 30 & D44 4.10 Ring and Pinion Kit With Install Kits – 360002
Dana 44 Ring and PinionAlloy USA JK Dana 30 & D44 4.10 Ring and Pinion Kit With Install Kits – 360002
- Alloy USA 360002 front and rear ring and pinion kit for Wrangler JK, 2007-2018
- 4.10 gear ratio with matched gears
- Install kits included for both axles
- Axle types: Dana 30 JK, Dana 44 JK and Dana 30A KJ
SKU: ALY360002 -
Dana 44 Ring and Pinion
Genuine Packages JK Rubicon Front and Rear 4.56 Ring and Pinion Package – JKGEARPKG6
Dana 44 Ring and PinionGenuine Packages JK Rubicon Front and Rear 4.56 Ring and Pinion Package – JKGEARPKG6
- Genuine Packages JKGEARPKG6 front and rear ring and pinion package
- 4.56 gear ratio for front and rear axles
- Dana 44 JK axle type listed
- Inferred fit for the 2007-2018 Jeep Wrangler JK from the JK Rubicon title
SKU: ADDJKGEARPKG6 -
Dana 44 Ring and Pinion
G2 JK Rubicon Front and Rear 5.13 Ring and Pinion Kit – 4-JKRUB-513
- Front and rear 5.13 ring and pinion kit for Rubicon JK Wranglers
- Dana 44 front axle and Dana 44 rear axle
- Matched front and rear master installation kits
- Computer heat treated 8620 steel
- Limited lifetime warranty
SKU: G/24-JKRUB-513
What a ring and pinion does
The ring gear and pinion gear turn the driveshaft's rotation ninety degrees and reduce it to drive the wheels. Their tooth counts define the axle ratio, such as 4.10 or 4.88. A numerically higher ratio multiplies torque more, which helps a vehicle fitted with bigger tires, and a lower number favors highway rpm and fuel economy. Gears wear out, and they are often replaced when the vehicle is re-geared for larger tires or when a differential or axle is rebuilt.
Choosing a ratio
Pick the ratio based on tire diameter, engine power, transmission, and how you drive. Taller tires effectively lower your gearing, so owners often move to a numerically higher ratio to restore lost performance. A rule of thumb is to compare the revolutions per mile and cruising rpm before and after the change. Heavy vehicles, towing, and low-torque engines benefit from steeper gearing, while a lightly loaded vehicle that does a lot of highway driving may suffer at too high a ratio. Always gear the front and rear axles to the same ratio, since mismatched ratios can damage the transfer case and drivetrain in four-wheel drive.
Details to confirm
- Axle position: front and rear sets differ. Some Jeep front axles use reverse-rotation gearing, listed with an R in some part numbers.
- Carrier break: a ratio like 3.73 and below uses a different carrier than 4.10 and above. Confirm the correct carrier or use the right master kit.
- Application: listings for YJ, JK, and JK Rubicon sets reflect different housings and options, so match your model.
- Kits: some sets include bearings, shims, and hardware in a master installation kit.
Installation notes
Gear setup is precision work. Pinion depth, backlash, and bearing preload must be measured and adjusted for quiet operation and long life, and incorrect setup quickly ruins gears. Unless you have the tools and experience, professional installation by a shop that does differential work is recommended. Use the specified gear oil and break in the gears gently, following the manufacturer's guidance, which usually includes short drives and an early fluid change.
Also plan for ancillary changes, such as speedometer recalibration and anti-lock or traction control settings, after a ratio change. Always confirm fitment for your exact year, make, and model, and check the manufacturer's specifications.
Preparing and breaking in
Inspect the rest of the axle before spending on gears. Check the carrier bearings, pinion bearing, and axle shaft condition, and replace the seals at the same time, since a leaking pinion seal will soon contaminate a new set. Wipe the housing clean and check it for cracks around the pinion and the axle tubes. Mark and record the existing backlash and the wear pattern, as it helps diagnose any problem with the new set. A quality set should come with a marking compound and a setup procedure. After installation, drive gently for the first several hundred miles, avoid heavy towing, let the axle cool between runs, and change the gear oil early to remove metal particles from the break-in.
Related guides
- Is Your Dana 44 Vent Destroying Your Axle?
Popular Dana 44 Ring and Pinion brands
Dana 44 Ring and Pinion FAQ
What gear ratio should I choose for 35 inch tires?
It depends on the vehicle, engine, and use. Many owners move to a numerically higher ratio, such as 4.88 on a Wrangler, to recover performance. Check your current ratio and consult the gear maker's recommendations.
Do I have to regear both axles?
Yes. Front and rear axles should have the same ratio, particularly in four-wheel drive. A mismatch can bind the drivetrain and damage the transfer case and gears. Ordering a front and rear set helps keep the ratios consistent.
What does reverse rotation mean on a front Dana 44 set?
Some Jeep front axles use gears cut for reverse rotation, shown as an R in certain part numbers. Using the wrong rotation will not mesh properly. Confirm which version your axle uses before choosing.
Can I install ring and pinion gears myself?
It is possible, but setting pinion depth, backlash, and bearing preload requires special tools and experience. Mistakes shorten gear life and cause noise. Many owners rely on a shop that specializes in differential work.





