Overview
The Dana Spicer 2002556-5 is a 3.36 gear ratio ring and pinion set for Dana 44 axles. Dana Spicer describes its ring and pinion gears as the same gears that come in a Dana axle from the factory, and the set is made to meet or exceed the original Dana standards.
The set is built with premium heat treatment, optimal tooth profiles and high-grade steel. The ring and pinion gears are built to current designs. It is one of the popular replacement ratios in the Spicer line and is a universal fit.
Key features
- 3.36 gear ratio for Dana 44 axles
- Premium heat treatment processes for the gear teeth
- Optimal tooth profiles and high-grade steel
- Designed to the same standards as original Dana gears
- Part of the Spicer replacement ratio range
Installing a gear set
A new ring and pinion is only as good as its setup. The pinion depth, the bearing preload and the backlash all have to be set before the gears are used. Each of these affects how the teeth mesh, and a poor setup can wear new gears quickly.
Contact pattern is the usual check. Marking compound on the ring gear shows where the pinion teeth touch, and the pattern tells the installer whether the depth or backlash needs adjusting. Shims and the pinion nut are the parts most often changed during this step.
Pinion seals, carrier bearings and the cover gasket are often replaced at the same time, since the carrier is already open. After assembly, a break-in period lets the teeth settle. Drive gently at first, avoid heavy loads, and watch the gear oil for metal particles.
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 2002556-5 |
| UPC | 23913127817 |
| Gear ratio | 3.36 |
| Axle | Dana 44 |
| Heat treatment | Premium process |
Vehicle fitment
This ring and pinion set is a universal fit because it is sized to the Dana 44 axle rather than to a specific vehicle. Fit depends on the axle, so match the carrier and pinion to a Dana 44 before ordering.
Fit is set by the axle, so check that your carrier is a Dana 44 and that the 3.36 ratio suits your gearing needs before ordering.
Installation notes
A ring and pinion set must be matched to the carrier, and the pinion depth and backlash have to be set once it is installed. A gear swap of this kind is best done by a shop with the right setup tools.
What’s included
One ring and pinion gear set.
Not included: Carrier, bearings and installation hardware are not part of this set.









