Bumpers and Grille Guards
Showing 1177–1188 of 1248 resultsSorted by popularity
-
-
-
Front Bumpers
Smittybilt SRC Classic Rock Crawler Front Bumper with D-ring Mounts in Matte Black Black – 76740D
Front BumpersSmittybilt SRC Classic Rock Crawler Front Bumper with D-ring Mounts in Matte Black Black – 76740D
- Smittybilt SRC Classic Rock Crawler front bumper, part number 76740D
- 3/16 inch cold rolled steel plate with matte black two-stage powder coat
- D-ring mounts included, bolts on with no drilling
- 5-year limited warranty
SKU: S/B76740D -
-
Rear Bumpers
Fab Fours Ranch Rear Bumper (Black) – FF09-T1750-1
- Gloss black powder coat (-1) or bare steel (-B)
- Pipe and tread plate combination construction
- Back-up lights included
- Pre-drilled sensor holes
- Retains the OEM receiver hitch and wiring locations
- 100 percent made in the USA
SKU: FFIFF09-T1750-1 -
Front Bumpers
Poison Spyder BFH Front and Rear Bumpers (Bare) – TJSPECIAL08
- Poison Spyder BFH front and BFH II rear bumper set in bare steel, TJSPECIAL08
- No wider than the frame rails; integrated winch mount in a one-piece front
- Brawler Bar extends 7.4″ forward and is 9.8″ high
- Rear frame cap bumper has no spare tire carrier provision
SKU: ADDTJSPECIAL08 -
Front Bumpers
Smittybilt XRC Front Bumper – 76806
- XRC front bumper from 3/16″ cold rolled steel with a built-in winch plate, Smittybilt 76806
- Winch plate holds a winch up to 10,000 lb; aluminum or roller fairlead
- Raised corners and a stinger with light tabs for two 9″ lights
- Two stage matte black powder coat with a 5 year limited warranty
SKU: S/B76806 -
Front Bumpers
Trail Gear Rock Defense Front Bumper (Bare) – 120061-1-KIT
- Trail Gear Rock Defense front bumper in bare 1020 DOM tubing, 120061-1-KIT
- Winch plate drilled for most 5000-9500 model low-profile winches
- Shackle receiver for winch or strap recoveries; not rated for towing
- Needs a hawse fairlead; not for use with a body lift
SKU: TGI120061-1-KIT -
Front Bumpers
Poison Spyder Brawler Front Bumper and BFH Rear Bumper (Bare) – TJSPECIAL09
- Poison Spyder Brawler front bumper and BFH II rear bumper in bare steel, TJSPECIAL09
- Frame cap style rear bumper with no spare tire carrier
- Brawler Bar extends 7.4″ forward and stands 9.8″ high
- Rear installs with captured Grade 8 hardware and existing bumper holes
SKU: ADDTJSPECIAL09 -
Rear Bumpers
Poison Spyder RockBrawler Rear Bumper with Shackle Tabs (Bare) – 14-61-010-D
- RockBrawler rear bumper 14-61-010-D with shackle tabs
- Bare 3/16″ plate steel with built-in high clearance receiver
- Universal mounting for TJ/LJ, YJ and CJ
- Receiver is a recovery point, not rated for towing
SKU: PSC14-61-010-D
What bumpers-bumpers-tire-carriers-winch-mounts-2 and guards do
A stock bumper is mostly a cosmetic and low-speed impact piece. Aftermarket bumpers-bumpers-tire-carriers-winch-mounts-2 are heavier and often made from steel or aluminum, adding protection, recovery points and mounting space for accessories. Grille guards protect the front end from brush and animal strikes without replacing the whole bumper.
Types of products
- Front bumpers: Full replacements, available with or without a winch mount, and sometimes with light pockets or a bull bar.
- Rear bumpers: Replacements with tire carriers, hitch receivers and recovery points.
- Grille guards: Frames mounted over the front fascia to shield the grille and hood.
- Headlight guards: Cages or brackets that protect lights from rocks and branches.
- Hood bumpers: Small guards over the hood edge.
Choosing between styles
Think about how the vehicle is used. A work truck near wildlife may want a full-width guard. A rock crawler wants a high-clearance, tucked design with good approach angles. A vehicle with a winch needs a bumper with a winch plate rated for its size. Shorter, stubby bumpers-bumpers-tire-carriers-winch-mounts-2 improve approach angle but give less coverage.
What to compare
- Material and thickness: steel adds protection and weight, aluminum saves weight.
- Winch compatibility, mount size and any required fairlead.
- Weight, which affects front suspension, springs and ride height.
- Recovery points, and whether they are rated.
- Compatibility with parking sensors, front cameras, radar and airbags.
- Finish: raw steel, powder coat or textured paint.
Installation notes
Bumpers can be heavy, and a helper or a lift is useful. Some bolt to factory points and others require trimming, drilling or relocating components. Front bumpers-bumpers-tire-carriers-winch-mounts-2 add weight that may need heavier springs to maintain ride height. Wiring for winches and lights needs proper fusing and connectors. Torque all bolts to the maker's specifications and recheck after trail use. Because bumpers-bumpers-tire-carriers-winch-mounts-2 interact with airbags, sensors and crush structures, professional installation is recommended in many cases, and you should read the manufacturer's notes about driver-assist features.
Fitment and legality
Confirm fitment for your exact year, make, model and trim, and check the manufacturer's specifications. Bumper height, width and lighting rules vary by state, so check local regulations.
Matching a bumper to your build
Decide the role of the bumper first: protection, recovery, winching, lighting or looks. Then check the weight limit of your front springs and the winch's size. Heavier bumpers-bumpers-tire-carriers-winch-mounts-2 may need stiffer springs or a leveling adjustment. Approach and departure angles matter off-road, so look at how far the bumper extends and how high the bottom edge sits.
Maintenance and mistakes to avoid
- Using non-rated points for recovery. Only use points the maker says are rated, with correctly sized shackles.
- Forgetting to seal bare steel at welds and edges, which rust quickly.
- Skipping a recheck of the bolts after the first trips.
- Wiring a winch with undersized cable.
Touch up damaged coating promptly, and inspect the welds and mounts for cracks, particularly after hard use.
When weighing styles, remember a stubby bumper ends near the tire for better clearance, while a full-width one adds side coverage; neither suits every need, so think about your usual terrain before choosing.
Popular Bumpers and Grille Guards brands
- Fab Fours (330)
- Smittybilt (138)
- ARB 4x4 Accessories (94)
- Addictive Desert Designs (92)
- Ranch Hand (80)
- Poison Spyder Customs (67)
- Go Rhino (59)
- Rugged Ridge (47)
- Warn (45)
- Westin (42)
- Rampage (37)
- Nfab (35)
Shop Bumpers and Grille Guards by type
- Front Bumpers (770)
- Rear Bumpers (340)
- Grille Guards (107)
- Headlight Guards (19)
- Hood Bumpers (12)
Bumpers and Grille Guards FAQ
Do aftermarket bumpers affect airbags and sensors?
They can. Heavy bumpers change crush behavior, and some block parking sensors, radar or cameras. Choose a bumper that states compatibility with your vehicle's safety systems and follow the maker's instructions.
How much weight does a steel bumper add?
It varies widely by design, from a modest increase for aluminum or stubby styles to well over a hundred pounds for full-width steel with a winch. Check listed weights and consider spring upgrades if needed.
What is the difference between a bumper and a grille guard?
A bumper replaces the factory bumper and supports recovery and winch gear. A grille guard mounts over the existing front fascia to protect the grille and lights, and is generally lighter and less structural.
Do I need a winch-ready bumper?
Only if you plan to install a winch. A winch-ready bumper has a reinforced mounting plate sized for a specific winch. Check the plate dimensions and rating against the winch you intend to use.










