Overview
The Fab Fours Rear Ranch Bumper in black, part FS08-T1350-1, combines pipe and tread plate in one heavy duty plate bumper. The Ranch line is shaped to follow the body lines of each model truck it is made for, giving the rear a matched look.
The -1 part number carries a gloss black powder coat finish, and the -B version is bare steel. Back-up lights come with the bumper, and the sensor holes are pre-drilled. The OEM receiver hitch and wiring locations stay in place, and the bumper is made in the USA.
Key features
- Pipe and tread plate combination build
- Gloss black powder coat (-1) or bare steel (-B)
- Back-up lights included with the bumper
- Pre-drilled sensor holes
- OEM receiver hitch and wiring locations retained
Planning the rear build
The rear of a truck carries a bumper, a receiver hitch, lights and often a spare tire, and each part affects the others. Before the bumper goes on, decide how the spare will be carried and whether a carrier or D-ring mount will be added. Bolt-on accessories shift weight to the rear, which can affect suspension behavior and steering load on the front axle.
Care is simple. Wash road salt off the plate and inspect the powder coat for chips, because bare spots on steel invite rust. Check the receiver hitch bolts and the light wiring after the first few trips, since rough roads loosen fasteners and chafe harnesses.
- Decide the spare tire location first
- Inspect powder coat for chips each season
- Recheck light connectors after rough trips
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | FS08-T1350-1 |
| UPC | 5810102210 |
| Position | Rear |
| Construction | Pipe and tread plate combination |
| Finish | Gloss black powder coat (-1) or bare steel (-B) |
| Back-up lights | Included |
| Sensor holes | Pre-drilled |
| Tire carrier | Not included |
| D-ring mount | Not included |
Vehicle fitment
The bumper is built to the body lines of each model truck it is made for. Match your truck’s year, make, model and trim to this bumper before buying.
Because no specific truck is named here, the fit must be checked for each vehicle before a purchase is made.
Installation notes
Plan the back-up light wiring before mounting the bumper. The lights come with it, and a fused feed to the reverse circuit is the usual approach.
What’s included
The rear Ranch bumper in black finish with back-up lights and pre-drilled sensor holes.
Not included: the tire carrier and the D-ring mount.









